Jump to content
SAU Community

Haltech Iq3 Display : A Worthwhile Upgrade ?

cobrAA

By cobrAA,
in Engines & Forced Induction

 Share

Recommended Posts

Mitchee Proficient

Mitchee

Posted
Posted

I agree with the absence of information on the dashes.. If you purchased your Racepak products through Haltech, or you have a Haltech IQ3/Haltech ECU, you can call Haltech and get local support.

KiwiRS4T Grand Master

KiwiRS4T

Posted
Posted

I just bought a Display Link - will give me access to all of the info accessed by my ecu allow logging and enable me to reduce the number of gauges needed. Only suits Link (or Vipec) though.

http://www.linkecu.com/products/TuningTools/DisplayLink

Sub Boy32 Rising Star

Sub Boy32

Posted
Posted

Work of art Sub boy32, fantastic setup, i think ill be doing the same with our setup.

Cheers!

It's beautiful! Where did you get the plate from?

Available from Racepak direct

Sub Boy32 Rising Star

Sub Boy32

Posted
Posted (edited)

The software is no different between the Display or Logger versions. In fact I would say that the display dashes are easier to update, set up and configure than the loggers as there's less parameters you need to deal with. It is a bit 'clunky' but once its up and running and you know your way around it, its easy to work with.

The Haltech IQ3's are manufactured for Haltech by Racepak and then are only programmed with a basic layout and packaged with a quick start guide by Haltech.

Love my Haltech Logger :) Anyone feeling lost with theirs I'm happy to help. I highly recommend you hook up the two buttons so you can easily scroll through the 4 available screens and view peak data!

EfGccrLl.jpg

The software maybe the same, but the updates for the Logger and the Display are different, the Display hasn't had a software upgrade in years, where as the Logger has.

Yeah, having the two buttons is great so you can program screens for different duties, i.e Street on one, track day on another etc. I used the two radio buttons on the top left of the dash for them and relabelled them.

Edited by Sub Boy32
Mitchee Proficient

Mitchee

Posted
Posted

Firmware updates are different correct. The current Logger firmware is v24, and current Display is v21 (v22 exists but i've had issues with it). You can get these from Racepak or Haltech. Display firmwares aren't on the Racepak website for some reason, but updated firmware does exist you just have to request it from them.

Also, if you have a Haltech dash, you can send it in to Haltech to be upgraded so that it can receive 20 concurrent channels from the ECU over the usual 15. The upgrade fee is $80.

  • Like 1
Sub Boy32 Rising Star

Sub Boy32

Posted
Posted

Firmware updates are different correct. The current Logger firmware is v24, and current Display is v21 (v22 exists but i've had issues with it). You can get these from Racepak or Haltech. Display firmwares aren't on the Racepak website for some reason, but updated firmware does exist you just have to request it from them.

Also, if you have a Haltech dash, you can send it in to Haltech to be upgraded so that it can receive 20 concurrent channels from the ECU over the usual 15. The upgrade fee is $80.

What was the problems you had with v22?

When you talk about the channel upgrade from 15 to 20, what did that add? Can you get the Odo to work?

Mitchee Proficient

Mitchee

Posted
Posted

What was the problems you had with v22?

When you talk about the channel upgrade from 15 to 20, what did that add? Can you get the Odo to work?

Odd communications problems when trying to program the dash.

It just adds 5 extra channels to display and/or log in the dash from the Haltech. The Odo function works fine. Make sure to tell the dash what channel it is using for speed so it can calculate distance for you.

Sub Boy32 Rising Star

Sub Boy32

Posted
Posted

That's odd, when I spoke to Racepak they told me that I wouldn't be able to get the Odo to work on the Display IQ3?

I'm using the speed output from the Link G4 through CAN Bus, but in the Odo menu on the Racepak Display software it's missing some of the links that the Logger software has.

What does the Haltech use for the speed input? Is it GPS?

cobrAA Mentor

cobrAA

Posted
  • Author
Posted (edited)

vehicle speed sensor.. so whatever the OEM input is generally.

My tuner told me it needed a box to convert the mechanical input from the r32 to an electronic input.

Sub-boy32, is it how you done it ?

but the more I think about it and I just think I will go with a ultraportable laptop 10 inch at 300$ and use that if I ever need to check specific parameters. Don't think I'm enough of a driver to make good use of these reading ( mind you I already have oi/water temp and fuel/oil pressure + A/F)

Edited by cobrAA
Sub Boy32 Rising Star

Sub Boy32

Posted
Posted

My tuner told me it needed a box to convert the mechanical input from the r32 to an electronic input.

Sub-boy32, is it how you done it ?

but the more I think about it and I just think I will go with a ultraportable laptop 10 inch at 300$ and use that if I ever need to check specific parameters. Don't think I'm enough of a driver to make good use of these reading ( mind you I already have oi/water temp and fuel/oil pressure + A/F)

I'm running an R33 speedo sensor in the gearbox, so I've done away with the mechanical cable.

I still think the dash is worth it, I've spent a lot on my engine, and being able to have read outs on all the important sensors is important, and programable warning lights if pressures etc get too low/hi

luke gtr Grand Master

luke gtr

Posted
Posted

vehicle speed sensor.. so whatever the OEM input is generally.

this.

just rwad the thread.

those with r32s, the speedo drive is mechanical, but the ecu should still have a vehicle speed in/output.

I believe its how they had the 180km/h limiter.

would it be possible to use this as the speed reference?

havnt dealt with the iq3 yet, but was looking towards one.

interesting reading, will keep an eye on this thread.

Sub Boy32 Rising Star

Sub Boy32

Posted
Posted

Yeah assuming cable is working on the 32 then the electronic input to ecu from dash is fine for reference

If you are taking the factory R32 cluster out like I did, then you will need to convert the mechanical drive to electronic or the ECU won't see a signal. The R32 cluster normally sends the signal.

Sub Boy32 Rising Star

Sub Boy32

Posted
Posted

Yeah, I have an R33 speedo drive.

.....still can't work out how people get their Odo to work on the display version IQ3, the Racepak software is missing some of the sections.

Does the Haltech spec'ed one have it's own software?

luke gtr Grand Master

luke gtr

Posted
Posted

If you are taking the factory R32 cluster out like I did, then you will need to convert the mechanical drive to electronic or the ECU won't see a signal. The R32 cluster normally sends the signal.

id be leaving my cluster in, and mounting display in front.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Ozdavroz
      Starting again

      By Ozdavroz · Posted

      Had another look at the car and I noticed the fuel pump isn't priming on ignition. I'd taken out the pump from the boot to siphon out the old fuel, so maybe I've knocked something loose or broken a wire putting things back together. Will go back with a multimeter and try to work out what's stuffed. Kinda hoping it's the pump itself thats gone so I can upgrade it
    • Duncan
      New R32 owner soon

      By Duncan · Posted

      Yeah agreed, you can't assume that shop are they only people who ever had to work on it. It was just a guess on the mods based on how things were done back then. You can check the Air Flow Meters by the part number on their tags, they are likely either Z32 or Nismo ones (both read about the same but the Z32 one is a little larger while nismo is stock size but supports the higher airflow like a Z32). And yes, all that would get you to 450hp / 340kw To tell what is happening with the turbos, you want a photo of the tag on the core, that will say what it was made out of  (they can retain the front and rear covers to make the plumbing easier)  
    • bardabe
      1992 R32 GT-R Race Car

      By bardabe · Posted

      I'm selling my personal race car. 1992 BNR32 Skyline GT-R About eight years ago the engine developed the dreaded low oil pressure problem. I removed it and found the issue. However shortly after I moved half way across the country, moved my work shop, bought a house, got married, then moved my shop again to it's permanent location for the time being. in turn I do not have the time to race this car as it should be. In turn the engine I built for this car will end up in my street car and this car I hope finds a home with someone who can use it to it's full potential. The roll bar was built by Jason Noren Fabricaiton in Pomona California to SCCA and NASA Specs. The car used to compete in redline time attack and global time attack enthusiast class. It also has a fire suppression system.  The car is with me at my workshop in Kyle Texas, USA. Shipping it is no problem, I can personally deliver the car to the port of either Houston or Los Angeles. Any other port depending on where it is may require transport but we can always work that out.   The chassis itself is rust free, rear quarters and under fenders are free of any rust so it's a very solid foundation for anyone who wishes to move forward with it. As posted and at the asking price of $20,000 USD the car includes all of the following;   All OEM Body panels, front fenders, rear bumpers etc.  OEM Nissan Projector headlamps (Pictured N1 lamps were removed) OEM Nismo Side Skirts / Extensions OEM Rear Spats  Front & Rear Subframes are installed car is full roller Rear Subframe has Cusco Camber Arms, Whiteline HICAS Elimination Front Subframe has Whiteline tension rods and whiteline Sway bars w/ endlinks.  Buddy Club N1 Coilovers All chassis wiring and engine wiring is in tact. Attessa System is fully in tact and was functional before engine removal.  BCNR33 GT-R Brembo Brakes F+R with Endless MX72 Plus Pads, DBA Rotors & Stainless Steel Brake lines Billion Racing Radiator Billion Radiator Hoses Fluidyne Engine Oil Cooler Accusump System (trunk Mounted) 5 Speed Transmission w/ Transfer Case F+R Prop-shafts Rear Differential With rear Axles.  Nismo Gauge Cluster Nismo Clutch + Flywheel   Essentially what is needed to make this car running and driving again is as follows: A working Engine, an ECU, and time to put it together. The price posted is or best offer as I am willing to remove some components to accommodate price to a certain extent. If any serious buyer wants full detailed pictures, videos, or any questions I'll be happy to answer them. I believe this car is priced to move quickly considering it's a rust free and very straight chassis but always open to fair negotiation.  I can be contacted via phone or email. (+19517081648) email is juan@bardabe.com   
    • Kapr
      Oil pan for RB25DET NEO Stagea "version"

      By Kapr · Posted

      So...to my (and my mechanics doing the swap) surprise...the oil pan from NEO engine does not fit 100% and needs to by modified like this: It is not a huge problem but in the future i want a "proper" oil pan. So question is...what different oil pan can i get to fit without any problems and modification? Thanks! 
    • Rezz
      New R32 owner soon

      By Rezz · Posted

      Some more info I found.  These are the last entries Yoshikiyo Fujii made on his blog before he passed away in 2009: http://blog.livedoor.jp/fujii_dynamics/ And finally this is where the workshop was situated:  https://maps.app.goo.gl/HhTPtHzt3WVcBTiEA  
×
×
  • Create New...