Jump to content
SAU Community

Recommended Posts

ooh yeah, just looked @ Elfin site. Cool stuff there! I know it's dear, but the MS8 looks wicked. Just imagine it with an RB26, 4WD, 6 speed Getrag, 6 Piston AP's...... there I go again, getting carried away! It's a disease!......... hey, jlnewton, can I buy your car once you finish it?

you can buy mine now if you want it.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896024
Share on other sites

  • Replies 41
  • Created
  • Last Reply

Top Posters In This Topic

Great thing about the 1600 is the low weight and a tin roof for daily driver. Technologically there is little difference to the clubby, and I would happily have both.

Don't get me wrong, there will be a lot of work to bring either up to speed, but I have found few cars more reliable and driveable than a well done 1600.

in the end i think a good clubby would destroy it though, and individuality is all important, hence my effort to make a quick GTS25t on track.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896055
Share on other sites

Clubman v GTR? the clubman will kill a GTR.....

eg Eastern Creek, a quick GTR will be around 1.45, clubmans about 1.41.....and EC is a high speed track, it gets even uglier on a tight track....eg a clubman has done 1.03 at Wakefield

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896151
Share on other sites

I have no idea what they're worth (though I'm guessing $$$$) but in a bike mag I read about a clubman-style thing, based on a Caterham Seven IIRC, that you could option all the way up to twin bike motors (choice of Hayabusa, Blackbird or ZX12R) and 4WD. 0-100kmh in 2.8 sec, and would no doubt lap any circuit on the planet faster than just about anything once setup right. If you're interested I can dig up the article and scan it, might take a while though, I have quite a few bike magazines :D Bolt a turbo to each of those motors, run low boost to keep it reliable(ish), and you'd have a 700hp, 500kg racer ;)

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896443
Share on other sites

Remember the Catheram took the lap record at Nurburgring from either Porsche Turbo or GTR and they were all excited. Good stuf but they are comparing a toy with a car with full comforts so I wasn't that impressed. Still a good drive though. Almost as good ast pete (fats) in the "little renault"

Yeah one of those would be wicked.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896901
Share on other sites

Pete's drive was good until he backed it into a wall at the ring! lol!

I was contemplating a clubman at one stage. The biggest worry was not parts which may need to be fabricated. The instructions given to you may not list the parts which need fabrication because there are a variety of engines which you could fit in there. But most common engine is the 4AGE 16V. I was talking to the guy who distrubutes Westfield kits for NSW and he said at the time the 4AGE 20V was not legal because of emissions testing not conducted on the engine.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896982
Share on other sites

Just got this from the PRB Site, been getting some good sydney stories from Roy now he is down here.

Mmmmm Focus engine, but the 20V is nice too. This has got my interest for a new buildup since I am selling a house in Melb soon and want to tinker in Bris when I get there. Would be a great project with the girly involved.

Now available with 79/00 emissions compliant Toyota 4AGE-20 valve or Ford Focus engines.

[/color]

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-896991
Share on other sites

I've been looking around at a few, but the quality of the build varies greatly. Some people seem to think "zip ties" make great structural braces!

A consistent difference with a lot of these kits seems to be the availability of independent rear suspension as an option. My belief that for pure circuit work, a live rear axle will be just as good. Anyone care to disagree?

As an aside, I recall reading about a "Radical" in a Euro magazine a while back. These are along the same lines as a clubman, but full bodied. GSX-R turbo & NA powered I think, and HEAPS quicker than Porsche GT3 RS, Lambo etc... But WAY too expensive for what it is. An Ariel Atom looked cool to, powered by the latest Civic Type R engine.

skylinegeoff, I kinda agree with your thought that a clubman is sort of "cheating" when it comes to comparing with "real cars", by not dragging around all the heft road cars have to.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-906943
Share on other sites

Remember the Catheram took the lap record at Nurburgring from either Porsche Turbo or GTR and they were all excited. Good stuf but they are comparing a toy with a car with full comforts so I wasn't that impressed. Still a good drive though. Almost as good ast pete (fats) in the "little renault"

 

Yeah one of those would be wicked.

Caterham's are absolute track weapons -- 0-100 in 3.4 seconds:

http://www.caterham.co.uk/showroom/sevens/.../superlight.htm

But as you said, that's basically all they are good for: would be horrible to try and use one as a dialy driver.

If you flushed with cash I would probably choose a Lotus Elise: its still hard core, but at least it has a roof! Car and Driver did a track car roundup this month too:

http://www.caranddriver.com/article.asp?se...article_id=8202

LW.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-906974
Share on other sites

Good price, but they are fiercly unreliable at that power level. There is a massive amount done to it though so it would be nice just to have in the garage.

Would be worth it except for the hairdresser image. :)

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-908369
Share on other sites

Most of you would have looked @ that J-Spec Celica, seems a lot of gear for the money, even if it needs a rebuild (that I can do myself if I get excited).

Do you think that's a reasonable car to think about? Are they really designed for that power level? Would I be able to drive it to the track legally?

I've been lookin and thinking, but would appreciate your thoughts.

Or wait for a good Clubman?

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-910644
Share on other sites

My thoughts are its a heavily modified car, so you could spend forever trying to work out what parts might be causing problems, particularly since you didn't make the modifications yourself and I doubt they are documented.

The owner seems to have gone all out... how much of the stuff added actually improves upon the base car you would never know without stripping it all off and trying piece by piece.

As for the legalities, I doubt it could be made road legal even if you were allowed to import it without a CAMS license.

Have you thought of an Evo or WRX race car? A number of these have come up recently and they are quite cheap: you would need a CAMS license to bring them in though and they aren't road registerable. :rofl:

Edit: you could always buy a road legal Evo/WRX/whatever shell and switch all the parts from the JP car.

LW.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-910661
Share on other sites

Most of you would have looked @ that J-Spec Celica, seems a lot of gear for the money, even if it needs a rebuild (that I can do myself if I get excited).

Do you think that's a reasonable car to think about? Are they really designed for that power level? Would I be able to drive it to the track legally?

I've been lookin and thinking, but would appreciate your thoughts.

Or wait for a good Clubman?

I reckon an unknown modified jp celica with a blown motor is among the worst you could buy.

First decide what you want a car for.

If its club/open track days, then maybe buy a stock(ish) jp import.

If you want a quick race car buy something already here and proven like an improved production car - second hand race cars are great value and all the expensive and hard work is already done. Cars like the celica are not eligible for *any* type of racing in australia

If you want a long list of mods to impress your friends buy the celica.

Link to comment
https://www.sau.com.au/forums/topic/43780-clubmangtr/page/2/#findComment-912061
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • This. As for your options - I suggest remote mounting the Nissan sensor further away on a length of steel tube. That tube to have a loop in it to handle vibration, etc etc. You will need to either put a tee and a bleed fitting near the sensor, or crack the fitting at the sensor to bleed it full of oil when you first set it up, otherwise you won't get the line filled. But this is a small problem. Just needs enough access to get it done.
    • The time is always correct. Only the date is wrong. It currently thinks it is January 19. Tomorrow it will say it is January 20. The date and time are ( should be ! ) retrieved from the GPS navigation system.
    • Buy yourself a set of easy outs. See if they will get a good bite in and unthread it.   Very very lucky the whole sender didn't let go while on the track and cost you a motor!
    • Well GTSBoy, prepare yourself further. I did a track day with 1/2 a day prep on Friday, inpromptu. The good news is that I got home, and didn't drive the car into a wall. Everything seemed mostly okay. The car was even a little faster than it was last time. I also got to get some good datalog data too. I also noticed a tiny bit of knock which was (luckily?) recorded. All I know is the knock sensors got recalibrated.... and are notorious for false knock. So I don't know if they are too sensitive, not sensitive enough... or some other third option. But I reduced timing anyway. It wasn't every pull through the session either. Think along the lines of -1 degree of timing for say, three instances while at the top of 4th in a 20 minute all-hot-lap session. Unfortunately at the end of session 2... I noticed a little oil. I borrowed some jack stands and a jack and took a look under there, but as is often the case, messing around with it kinda half cleaned it up, it was not conclusive where it was coming from. I decided to give it another go and see how it was. The amount of oil was maybe one/two small drops. I did another 20 minute session and car went well, and I was just starting to get into it and not be terrified of driving on track. I pulled over and checked in the pits and saw this: This is where I called it, packed up and went home as I live ~20 min from the track with a VERY VERY CLOSE EYE on Oil Pressure on the way home. The volume wasn't much but you never know. I checked it today when I had my own space/tools/time to find out what was going on, wanted to clean it up, run the car and see if any of the fittings from around the oil filter were causing it. I have like.. 5 fittings there, so I suspected one was (hopefully?) the culprit. It became immediately apparent as soon as I looked around more closely. 795d266d-a034-4b8c-89c9-d83860f5d00a.mp4       This is the R34 GTT oil sender connected via an adapter to an oil cooler block I have installed which runs AN lines to my cooler (and back). There's also an oil temp sensor on top.  Just after that video, I attempted to unthread the sensor to see if it's loose/worn and it disintegrated in my hand. So yes. I am glad I noticed that oil because it would appear that complete and utter catastrophic engine failure was about 1 second of engine runtime away. I did try to drill the fitting out, and only succeeded in drilling the middle hole much larger and now there's a... smooth hole in there with what looks like a damn sleeve still incredibly tight in there. Not really sure how to proceed from here. My options: 1) Find someone who can remove the stuck fitting, and use a steel adapter so it won't fatigue? (Female BSPT for the R34 sender to 1/8NPT male - HARD to find). IF it isn't possible to remove - Buy a new block ($320) and have someone tap a new 1/8NPT in the top of it ($????) and hope the steel adapter works better. 2) Buy a new block and give up on the OEM pressure sender for the dash entirely, and use the supplied 1/8 NPT for the oil temp sender. Having the oil pressure read 0 in the dash with the warning lamp will give me a lot of anxiety driving around. I do have the actual GM sensor/sender working, but it needs OBD2 as a gauge. If I'm datalogging I don't actually have a readout of what the gauge is currently displaying. 3) Other? Find a new location for the OEM sender? Though I don't know of anywhere that will work. I also don't know if a steel adapter is actually functionally smart here. It's clearly leveraged itself through vibration of the motor and snapped in half. This doesn't seem like a setup a smart person would replicate given the weight of the OEM sender. Still pretty happy being lucky for once and seeing this at the absolute last moment before bye bye motor in a big way, even if an adapter is apparently 6 weeks+ delivery and I have no way to free the current stuck/potentially destroyed threads in the current oil block.
×
×
  • Create New...