Jump to content
SAU Community

Gtst - The Never Ending Build

75coupe
 Share

Recommended Posts

34GeeTeeTee Grand Master

34GeeTeeTee

Posted
Posted

So im thinking i will have to roll the front guards and maybe a pump if possible to fit 17x9 with 265 rubber, if anyone knows someone to do it on the central coast that would be helpful...

Not sure about guard rolling but Road2Race is awesome with alignment and suspension work if you need to adjust it to get them to clear ;)

  • Replies 55
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

75coupe
75coupe

So a full weekend of car toying. Found the timing belt had jumped three teeth on the crank, damn lucky to only jumped three anymore would of mashed the valves. So thats fixed. New belts, new front cr

Posted Images

Victory Mentor

Victory

Posted
Posted

It is amazing what you can fit under R33 guards without a lot of work. My front guards are stock and I have rolled the rears to give me a bit more clearance. It is easy to roll the rears (we did it ourselves) but the fronts are more involved due to the shape of the guard.

The real issue with larger rims is offset. If you can get rims with a 30 to 35 offset you can normally clear suspension and guards without any problems. If you go for GTR offsets of around 20 then you can get outside the guards pretty easy.

You also need to think about tyre shape - some like Yokohama 048 and 050 have a rounded shoulder which provides a lot more clearance. Other makes like Kumho V70A have a square shoulder that means that you will require more clearance.

Here are 18 x 9 with 35 offset and 265/35/18 Federals on our R33 front and rear with no clearance problems

post-24210-0-81258300-1405338177_thumb.jpg

post-24210-0-03846900-1405338195_thumb.jpg

We also ran 17 x 9 with 22 offset and 245/40/17 Kumho V70A tyres at Eastern Creek with no clearance problems but they were a bit outside the guards.

post-24210-0-95901900-1405339790_thumb.jpg

post-24210-0-66798100-1405339806_thumb.jpg

We have now gone even bigger with 17 x 9 with 35 offset and Kumho V70A tyres with 255/40/17 fronts and 275/40/17 rears but no pictures as yet. These things are seriously big with the 255/40/17 fronts about 2 cm wider than the 265 Federals.

I would be trying wheels and tyres on you car before you go modifying guards too much.

  • 1 month later...
75coupe Grand Master

75coupe

Posted
  • Author
Posted

So a full weekend of car toying.

Found the timing belt had jumped three teeth on the crank, damn lucky to only jumped three anymore would of mashed the valves. So thats fixed. New belts, new front crank seal too.

Installed new clutch, billet flywheel, crank seal, thrust and spigot bush. New npc 5puk carbotic clutch, and put in a rebuilt gearbox...

post-26316-14101639857011_thumb.jpg

post-26316-14101639994521_thumb.jpg

post-26316-14101640252618_thumb.jpg

New clutch bites hard but pedal feel is lighter than the average exedy that was in there which was totally shot.

Now just to change oil and filter, bleed brakes, and for the semi slicks in prep for track day at smsp 22nd sept...

Took it for drive today felt good and im getting used to the clutch, should all be sweet for track.

Now to look at new diff, start saving...

  • Like 1
75coupe Grand Master

75coupe

Posted
  • Author
Posted

Well it was running real rough id been testing and diagnosing it for few months and then decided it was timing and took it dvs jez, its all good now, didnt drive it with bad timing just trailered it up there.

Well i would like a nismo 1.5 gtpro, lets see how much i save for a car budget...

75coupe Grand Master

75coupe

Posted
  • Author
Posted

You need to either use the rb26 cams baking plate or cut the corners off the rb25 one, ive cut the corners off but also have a 26 one there for when i get chance to swap it in, you so need to cut a hole in the c belt cover for the vct on the intake cam so it can poke through as the 26 doesnt have the vct bulge...

Eventually wiuld like to get a 26 belt cover made in cf but with the 25 vct bulge, or weld in a bulge to my current 26 belt cover... Either way.

  • 4 weeks later...
75coupe Grand Master

75coupe

Posted
  • Author
Posted

So for the smsp track day not only did i have a rear wheel alignment done by eye, old used street tyres on the rear and healthy semis on the fronts, but i ended up with the upper control arm with a sheared off bolt, major issue, all of these things added up to a hard to handle car... And here i thought it was just my poor steering skills...

post-26316-14125822627926_thumb.jpg

Victory Mentor

Victory

Posted
Posted

The semi's must have been generating some grip to break a high tensile bolt like that.

You were so lucky that the other bolt did not fail resulting in the front wheel collapsing under the car.

  • 1 month later...
  • 2 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      I might be way off the mark here.. there must be a T junction under the manifold. That takes manifold pressure through a check valve prior to the T, one side splits out to this bleed off orifice, the other straight to the wastegate actuators. 
    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

    • ARB26
      RB26DETT Sketchy boost mod?

      By ARB26 · Posted

      Carrying out some engine due diligence before my first drive in a 260RS that has been in storage for 10+ years, and found two lines that are susposed to be plumbed into the boost control solenoid. One of the lines (the wastegate boost supply line) to actuate the gates, had a bolt in one end blocking it. The other line (main boost signal line) from the very rear of the intake manifold (RB26DETT) and runs up to the boost controller had this pill in the end of it as seen in photos. Other than the obvious (T28 Ceramic turbos might well be cooked)  Can anyone shed any light on if there is any validity at all with this mod, bleeding a constant fixed rate of manifold boost pressure off through this 3mm hole?  Is it deliberate?  Was this a 90s Jap mod done to RB26's? Or has someone just fitted this without any idea of what happens to ceramic T28s if they are not gate controlled?    
    • PranK
      Chris' Toyota Mark ii JZX110

      By PranK · Posted

      This looks great! Awesome to have the 5 speed with an LSD in this. The Recaro's look like SR2's or SR3's. It's a shame they've been retrimmed as they would have looked sweet in their original colours. I think I'd want my agent to be a little more up front and informative too. I've never imported but I reckon it would make me a little nervous, so the more info the better.
    • soviet_merlin
      Duncan's V37.......race car?

      By soviet_merlin · Posted

      Thanks for doing that Duncan! Makes you a good person in my books. We don't get kangaroos or wombats here. But we have bats and it's similar. AFAIK it's often the mums with a baby attached that get hit because they drop lower when starting from a tree. If you hit an animal, check on it. https://www.ifaw.org/au/resources/wildlife-rescue-app An app to get the closest wildlife rescue contact.
×
×
  • Create New...