Jump to content
SAU Community

Recommended Posts

Hi all,

Sorry to make the first post a need but I'm really lost. Just picked up my first Stagea, an 03 Rx4. 1 day after getting it the main tailgate (not the glass) would not open. I found the emergency release but now it won't close completely. It latches but the dash warning and interior light stay on. I checked the two rear door related fuses in the driver kick panel but all was ok. The car does not seem to be fitted with any kind of auto close. The glass access works perfectly.

Any help/advice appreciated.

Link to comment
https://www.sau.com.au/forums/topic/438950-m35-tailgate-help/
Share on other sites

There is a relay box behind the battery, you will need to remove the covers to see it. Make sure the hole in the bottom of the battery compartment isn't blocked and filling it with water.

Dry as a bone. Has anyone else had this problem?

Yes, but did you check the fuses on the relay board?

Yes. There are two boxes behind the battery and 1 in the kick panel. All seem ok. Is there a sensor or something in the door that reels it to lock/close after you shut it?

There would be a microswitch for the button, and another in the lock mechanism to engage the auto close. I haven't played around with the lock as yet. Perhaps the wiring where it goes through the hinge may be playing up?

I hope they didn't drill through it when the child restraints were fitted.

Nothing in that tailgate is simple unfortunately.

I second that!

Did you just pull the fuses out and visually check them?

I would surgest using a multimeter or test light on each side of the fuses.

Motor is stuffed. Im in brisbane if u need help replacing

Thanks mate :) I might need to take you up on that. Beer and pizza will be provided! Is there a multimeter check I can do on the motor? I'll pull the trim off tomorrow and make sure it's not a plug undone or something easy :)

  • 3 weeks later...

Very interesting, I just got the same problem, but the glass window won't open either, checked all the fuses in the footwell, all seem ok, I checked the fuses in the engine bay as well, are any of the relays related to the tailgate?

Edited by Barras
  • 4 weeks later...
  • 6 years later...
  • 1 month later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • We have a huge update coming in the next few months, version 5 of Invision will be released. I'm holding off any changes until after this change as I'm not sure what features will be removed or introduced.
    • Yeah, plenty of air flow, there is a dedicated path that feeds the air in to the OEM intake tube behind the bumper As for a "tangible effect", maybe, but getting the pod/intake air out of the hot engine bay is worth it psychologically to me, even if it gives no performance difference, so the tangible effect in my Lizard brain saysss yessss  In the end, to me a tangible effect isn't always about performance, sometimes it a sound or a look, or even a...... feeling  Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga Ooga-Chaka Ooga-Ooga
    • yeah first and reverse is where you will find clutch release issues (whether hydraulic or mechanical) because the difference in revs required is the highest there; particularly changing down from 2nd to 1st when still moving. To be clearer though, it is possible that the clutch release bearing is the wrong height. This is less likely than a hydraulic issue but it is not unheard of when you are mixing and matching
    • Quite right, if you make it to that pension you deserve every cent
    • Hi all, Restoring r33 series 1 rb25det. All the heater hoses were on their way out, have replaced them and put it all back together. After testing I noticed a small leak from behind the head on the actual metal water line to the turbo when cars warm. I tried running a longer hose over it but it kept leaking...   I am about to take the (stock) manifold off again😔 to change the water line does any one have any lines they recommend? I was looking at Aeroflow Turbo Oil & Water Line Set but not sure what everyone else recommends. Car is completely stock but want to upgrade turbo eventually. it looks like ill have to disconnect a lot just to replace these lines so if there's anything else recommended to do please let me know. Thank you in advance!
×
×
  • Create New...