Jump to content
SAU Community

R33 Speed Cut

-S-

By -S-,
in Four Door Family & Wagoneers

 Share

Recommended Posts

-S- Community Regular

-S-

Posted
Posted

I can drive past 180kph on my car and a little over 190.[from my own judgement] after 190ish it wont go up anymore...

is that speed cut? but i doubt it as i imagine it to be just at 180 kph.

planning to get a RSM if mine really has a speed cut... of 190 that is...

feedback appreciated .

thanks

Link to comment
https://www.sau.com.au/forums/topic/439331-r33-speed-cut/
Share on other sites
Hank Scorpio Grand Master

Hank Scorpio

Posted
Posted

If you fit a motec exhaust it eliminates the factory speed cut. I'd probably look at a bigger top cog in the auto too mate. They are always pretty short hey.

While he's doing the top cog is it worth spending the extra to convert to flappy paddle?

Link to comment
https://www.sau.com.au/forums/topic/439331-r33-speed-cut/#findComment-7204386
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

yes im not from around here...

not that i really need it to go beyond 180... i just wanted to make sure mine has the speed limiter... but wasnt sure because i gets past 180...

Because your speedo is out by 10k's at 180.

Link to comment
https://www.sau.com.au/forums/topic/439331-r33-speed-cut/#findComment-7205484
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Dose Pipe Sutututu
      What brakes on R34 GTT(Europe)

      By Dose Pipe Sutututu · Posted

      Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • soviet_merlin
      WGNC34 - floor mats

      By soviet_merlin · Posted

      Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • joshuaho96
      Tomei gasket

      By joshuaho96 · Posted

      I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • GTSBoy
      What brakes on R34 GTT(Europe)

      By GTSBoy · Posted

      The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Kapr
      What brakes on R34 GTT(Europe)

      By Kapr · Posted

      Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...