Jump to content
SAU Community

Recommended Posts

Hey guys I have had my r34 sitting for about a week due to not driving it any more.

First time taking it for a drive and I cannot get into the car with either the central locking or the key itself.

Just can't get more then half way with the key on both doors. Worked fine a week ago with central locking.

But now with that I only get one beep and that's to arm the alarm. No two beeps for unlocking.

I don't hear any locking mechanisms going at all

Boot lock turns and works.

Also

I have had a new battery fitted recently.

Link to comment
https://www.sau.com.au/forums/topic/439505-r34-gtt-wont-open/
Share on other sites

That's freaky.

The key should still work but trip the Alarm. At least it does with mine.

There is no way the key should not work in the door locks - not possible (as it is physical).

When you say new battery. Do you mean in the Fob or the car battery?

I have replaced both previously with no issues.

Sounds to me like the frequency has changed for the unlock motion :(

Edit: By the way I have a 34 GTT also

Edited by Sinista32

Try spraying some lubricant into the lock barrel with the key partly in and give it a try. Dirt and crap gets into them and if haven't been used in a while can make them hard to turn.

Tried the WD40 in the barrel with no luck. I have had this car for a while, so this is completely out of the ordinary.

Will try the battery tomorrow. Any ideas of how to get the bonnet up without getting access to the car?

  • 5 years later...

Sorry to dig up an old thread but this is happening to me right now. And it's got me stumped. 

I bought my r34 gtt end of last year and only have opened the car using the central locking. 

I had a flat battery in the car after leaving it over the Xmas and new yrs holidays. The car wouldn't unlock using central locking. So automatically I went to try open the car door using the key, and both doors won't unlock using the key. Tried the boot and it opened fine. So I called the previous owner and asked if he had problems unlocking the doors with the key, in which he replied he's had flat battery before and the door unlocked fine with the key... 

Anyway, I ended up unlatching the hood and put jumper leads on the battery to another car to unlock the gtt with central locking remote. 

But the key still won't turn on both doors... 

Any ideas? 

(I don't have a spare key) 

Le sigh.

If the key won't turn the barrel, then either they don't go together, or the mechanisms in the doors are jammed. The first is 1000000% more likely than that both doors have f**ked up in the same way. Nevertheless, you could take the door cards off, and check out the locking rods, clips, pivots and so on and spray some lithium grease on them and see what's happening. In fact, if you take the cards off and then use the internal lock mechanisms (near the inner door handle) you should be able to see if the only possible thing that could be wrong is that the lock barrels won't turn.

Then you get a locksmith.

And FFS. You've had the car 2 years and haven't attempted to get a spare key?!!!

50 minutes ago, GTSBoy said:

You've had the car 2 years

 

2 hours ago, leej84 said:

bought my r34 gtt end of last year


3 weeks? 
 

the old called the previous owner.... I wouldn’t answer, deal done 1 2 warranty.

Yes, I've had the car for about 3 weeks and went on holidays during Xmas and new yrs. 

The previous owner has actually been very helpful and there's no reason for him to lie. I don't expect him to fix the problem anyway. 

I guess I'll open up the door cards to see what's going on.

Being a Skyline (ie cop bait and thieving prick bait) there is a very high possibility that it has been broken into at some point.  The owner possibly replaced the barrels with a new (or used) set or they re-coded the door barrels without re-coding the whole car (which they should do).

Whip the door trims off, pull the locks out and drop them to the locksmith to be matched to the key or replaced and recoded if they are stuffed.  I agree with GTSBoy that it's unlikely BOTH sides are worn out as the passenger side door lock would be very infrequently (if ever) used, even more so on a car equipped with remote central locking!

Good luck!

  • Thanks 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Will have a look at that. I cant see any leaks 
    • Put another overflow bottle (ie, a 1.25 coke bottle or similar) under the overflow hose and see if it is being pushed out there or if it is disappearing into the engine.
    • Staring on a stand is no issue. You just have to wire everything up, give it fuel and cross your fingers that the stand is robust enough. Arranging the inlet plumbing is often the hardest part, without any surrounding structure to hand some of it from. No need for coolant if you only want to run it for <1 minute. As to the gearbox - I think the little Aisin box is a bit stronger than the other small Nissan boxes that went behind SRs, but I wouldn't be too keen to test its limits with the torque of a boosted 25. I don't know if you can retain the box and the tailshaft. The box won't connect to the RB without an adapter of some sort, which is either a plate that will push the engine forward (which is not good for fitting it into the bay's available space) or push the box back, which messes with the box position and tailshaft length - OR - cut and shut work on the bellhousing, which is a long way from "least modification". I'd be buying a new 370Z 6 speed or similar, doing what has to be done to that to make it fit RB (ie, cut and shut bellhousing) and the requisite tailshaft custom/mods.
    • Hi Everyone I am from West Pennant Hills in NSW. Been too busy until recently to attend to my RB25DET Series 2 engine until recently. I am planning to stick it into the S15 shell at this stage, unless a nice SR20DET turns up... For now, i am going to try and get the RB25 running and working well then decide what gearbox to use. My preference is to retain the SR20DET  6 speed gearbox and tail shaft to retain as much and least modifications as i can avoid. I am an old guy and won't be doing any heavy drifting so i don't need a bullet proof gearbox Does anyone have experience with starting the RB on a stand? I got everything setup as much as I can with the info i can find... endless searching and videos on Youtube I would be great to get some pointers Cheers Songo
    • Hey all, Recently have had my s1 r33 gtr serviced and noticed my coolant reservoir was topped up to the max line. Took the car out for 1 yesterday and noticed today the reservoir is completely empty.  Any ideas? Radiator is full
×
×
  • Create New...