Jump to content
SAU Community

Recommended Posts

I've just installed a HKS GT2535 turbo on the good old RB20det and i'm not sure if I have a problem or not.

The turbo works fine and does'nt leak oil whine or anything like that but when the motor turns off the turbo shaft spinning is audiable for about 10sec?

So is this bad?

Link to comment
https://www.sau.com.au/forums/topic/43973-turbo-still-spins-after-motor-is-off/
Share on other sites

HAHAHAHAHA you said it bbenny,even at about half throttle it wants to let rip but I can't let it yet coz it's lean up top,PFC will fix that.

RYanR31 I know what your saying,anyone know if thats true?

I'm pretty sure it's a heat issue rather than an oil circulation issue when shutting your car off. If you think about the operation of a turbo timer, it simply lets your car idle for a set amount of time, allowing the bearing in your turbo charger to cool down as there is not load on them causing heat. Shutting off your car and hearing your turbo spool down is simply a good sign that all your bearings are in good shape :D

I bet you're gonna be loving your 2535 once all your PFC tune is sorted out. It's an awesome turbo on my car! (See sig for power :rofl:)

Damn. The good ol bush bearing units are dead still after a coupla seconds. I want a ball bearing turbo now *sook* haha Bush bearing units have quite a bit of friction I reckon when i was free spinning mine by hand.

hey all interesting topic this is

this year whilst workin in the dyno cell at the summernats i i was takin fotos of all cars and what not any way the car that one RAPID 8 after i took a few fotos of it just after a run front side in side all that and under the hood come back couple of minutes no shit and the turbos where just slowin to a stop crazy shit that is really makes you think how quick they are spinning i have no idea what size turbos they are but you can stick a nokia shock proof fone in the inlet with atleast 10 to 15 mm above it crazy crazy shit

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...