Jump to content
SAU Community

Recommended Posts

Just go northbound along Cumberland Hwy Genelle until you come to the M4 and get onto that!

Stay on left lane and turn into the Caltex/Maccas/Red Rooster/Trucking area at the rear.

  • Like 1

Just go northbound along Cumberland Hwy Genelle until you come to the M4 and get onto that!

Stay on left lane and turn into the Caltex/Maccas/Red Rooster/Trucking area at the rear.

Cheers ,see you all there. Can any one reckomend a clean cheap motel to stay the night close to where dinner is. :-)

Humbla, I recommend either Marco Polo at Haberfield or Palm Court Haberfield. Or google formula 1 hotel - I think closest one is Enfield 20 mins away.

Ian, we also have 20 different entrees, 12 different salads and a vegie platter. Can't go wrong with the vegetarians :)

  • Like 1

Humbla, I recommend either Marco Polo at Haberfield or Palm Court Haberfield. Or google formula 1 hotel - I think closest one is Enfield 20 mins away.

Ian, we also have 20 different entrees, 12 different salads and a vegie platter. Can't go wrong with the vegetarians :)

thanks. That might persuade her to come.

Working til 4:30am Saturday night Sunday morning, I'll need some strong coffee before I'm human that morning haha

My mate and his GF are also confirmed in his supra. Hoping for a good turnout on Sunday




  • Similar Content

  • Latest Posts

    • Yeh I think i'll message an old contact i had for ages that manages his own tyre shop now.. n tell him what i want n work with him before ordering..  Got this 17x9 +30 Driftteks on 245/45/17 PSR Drag Radials on the rear.. They fit well - for your reference in future - Rear guards  have been lipped in & minimal to non flaring of the rear Gaurds.    
    • If only it were that easy! I also needed to remove seats, shocks, brake calipers, send my car through a fence, and use measuring and ended up guessing because I didn't remove seats, shocks and brake calipers. It can be hard sometimes Can be a little more complex than 'just measure' if you want to truly measure the entire wheel through all of it's suspension travel. But if you aren't going for every last mm then yeah, you can check the space you currently have and guesstimate.
    • If you own a car, and it has wheels on it, and you know the offset of those wheels, and you have a measuring device, you have everything you need to work out if other wheels will fit.
    • Will this fit? but they are staggered set - RAYS 57DR SEMI GLOSS BLACK 18x8.5 +37 | 18x9.5 +38 5-114.3 STAGGERED SET   or If no go could just get a set 4's wheels of 18x8.5 +37 5-114.3 - would i run 8.5's 235s up front n 245's at the back if I do?   Thanks.        
    • Put a clamp on your return line. I have a feeling it's sucking air, and introducing bubbles to your fuel. With a lot of fuel, less problematic. I'd honestly be redoing all the lines in the tank and clamps on everything.   Also, you've given two different answers to the same question: Asked if being followed by the police you could get down to use the whole tank, you said yes you could, so long as you keep off boost. However, you then followed this up that free revving, it would also cause the issues. I'm doubting free revving is enough to make any noticeable boost on what is likely a decent sized turbo.   So now I have to ask, can you actually drive it lightly and use all the fuel, or does it break up even free revving? Also, have you put a fuel pressure gauge on it? Can you hear the pump change noise at all when you're having this issue?
×
×
  • Create New...