Jump to content
SAU Community

Recommended Posts

Since there was a bit of a turn out last open we had, we figured lets do it again!

Where: Shannons Canberra Branch 20/2 Yallorn St Fyshwick (directions below)

When: 31st May 2014

Same as last time, a informal car display so you can come and go as you please. Not like other shows where you are locked in until 2pm. There will be a coffee van, and I think the Celica club may be doing a BBQ again.

Also, coffee is free again :woot:

Directions: If you know where the United servo is in Fyshwick (for those of you running e85 you should know) we are located just behind that. Easiest way to get into the carpark, turn onto the driveway inbetween the car wash, and the British Paints shop and head straight up and see the giant green Shannons sign. There will be plenty of signage around for the driveway.

Link to comment
https://www.sau.com.au/forums/topic/440736-shannons-cars-and-coffee/
Share on other sites

  • 4 weeks later...
  • 1 month later...
  • 2 months later...

We are having another Cars and coffee day this weekend (tomorrow if fact, Saturday 23rd August) I don't get on here much, due to the lack of not owning a skyline anymore, so my apologises for the late notice.

The coffee isn't free this time, but we will donate $3 to beyond blue for each cup of coffee sold. Same deal as last time, informal car display. Come along to have a chat and drink some coffee.

  • 2 months later...

So I can give some notice this time around.

We are having another Cars and Coffee day on December 13th. This will close off the event season for the year in the ACT. So come along with your cars, and drink some coffee.

Same deal as last time, pay for coffee and talk some cars. We will have My Sweet Alice, coffee van out there this time. They make an epic ice coffee and the Canberra celica club have agreed to put on a BBQ for everyone.

Hope to see you all out there!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • ok so if i wanted to go 18's i would go for 8's  in front 30+ or 32+ off set at front and the back 9 would be ok? what offset should i aim for.. then can i do some  hunting for wheel rim choices..    If i get this - will this fit all around: Size: 18 x 8.5 +37 - n what tyres size tyre should i get for front n back?  
    • Absolute f*cking nightmare. I had to take breaks constantly, and I was always pissed off when I got home. The line split in Italy on day 2 (we drove from the Netherlands), lol. Driving any narrow European town was... well, sh*t.   Appreciate it man. Here, I'll just drop a favourite from the load I took on Saturday.   I'll update here when things happen with the car, the thing is, with stock power and almost everything chassis-wise taken care of, there really are no problems. 268,000kms now and counting.  
    • Ah! I actually managed to snag a lightly used set.... that aren't so suitable for me right now. They don't work on a GTT without some cutting or creative heat moulding. I thought about reselling them myself cause I didn't want to murder them, but it looks like I'm probably going to attempt to murder them/melt them because I may as well. @GTSBoy @PranK can somebody close this thread?
    • Hey mate,  I have a set, one is slightly damaged but wont be noticable once installed.  Shoot me a message if your still after them 
    • I couldn't wait But, the black constant tension hose clamps were too thick and there wasn't enough clearance at the T/B and I couldn't get it to seat properly, so I had use a silver one there I also added some 3" silicone over the alloy bit that goes through to hole on the radiator support as it looked like it was sitting on the edge of the hole in the radiator support, I never noticed a rattle or anything, but there was a witness mark It is basicly done, and I can live with the silver hose clamp at the T/B, I will get a black clamp for the head vent though where it is attached to the bulkhead fitting  It never stops...LOL, only issue now with the shock tower brace is it slightly touches the under bonnet liner now, if I leave it it will either wear some paint off the brace where it touches, or damage the liner, so I removed the liner to see what I have to work with, with the liner removed I have about 20mm of clearance, but sadly the middle part of the underside of the bonnet is only dusted with paint and looks crap, so I cannot have that, but.... as I have a roll of Carbuilders premium under bonnet insulation in the garage laying around that is only 5.5mm thick (we were going to use it on the boys Patrol, but he crashed the front of it a few months and it was written off, hence why he now drives my old Honda Accord Euro), I'll use the OEM liner as a template and get the Carbuilders stuff fitted up to cover that dusted paint up
×
×
  • Create New...