Jump to content
SAU Community

Recommended Posts

Hi guys,

I thought I'd post up some pics of a pair of headlights I repaired and restored. They arrived to me in average condition with damaged rear housings, some severe yellowing and previous internal lens coating work.

The damage on the rear housing was tidied up and the sharp broken edges were cut away. Some new plastic of a suitable shape was found and cut out to suit. Once I was happy with the shaping, I plastic welded the replacement plastic into place.

(The green is a ball of tape to stop any cut off plastic falling into the housing)

IMG_4372_zpsd6fdc8fd.jpg

IMG_4373_zpscfe5ef49.jpg

IMG_4374_zpse8883920.jpg

The outside of both lenses were wet sanded, starting off at 1500grit and working up to 2500grit (In the future I would go up to 3000grit).

IMG_4379_zps66cc4331.jpg

This revealed the coating on the inside of the lens which meant the headlight had to come apart. It's hard to see, but there is an odd shape on the surface. That is where I've started wetsanding. Once done I then polished the inside of the lens.

IMG_4413_zps0aca7d95.jpg

IMG_4412_zpsc266c65b.jpg

The reflectors and internals were given a tidy up and the loose indicator lenses were fixed into place. Here they are back together ready for external polishing.

IMG_4415_zps2e2373d9.jpg

I used Scratch-X to begin with and worked my way up from using Menzerna 1000, 2500, 5000.

IMG_4417_zpsb5e34040.jpg

IMG_4418_zpscda2c9a8.jpg

From this they were then hit with Menzerna UF, followed by 4 layers of AMMO Skin and AMMO Creme.

IMG_4437_zps6ca87839.jpg

IMG_4438_zpsbb76bd14.jpg

IMG_4439_zpsa6bbc0b9.jpg

IMG_4440_zpsdc87f76d.jpg

Enjoy!! :D

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/440962-r34-headlight-restoration/
Share on other sites

Thanks for the kind words guys. As has already been explained, the headlights can be removed with either a hot air gun or a putting them in the oven. I prefer to use a hot air gun.

excellent! i'd love to carry out these restorations, as buying good condition headlights are so expensive, and all it takes is a little time to fix up a damaged set. great work mate

Thanks mate. A little time and effort gives the best results ;)

we need ppl like you in sydney :(

Cheers. Shoot me a PM ;)

Great work on the 34 head lights btw

Thanks mate.

  • 1 month later...
  • 4 months later...

Hows the protectabt holdng up...i fond the heat from.the lights just tends to burn it off very quickly...

Really need to let some proper UV protectabt on there because once you strip off the coating it will cause them to yellow from.the inside out...

Have also heard about clearcoating them, haven't tried it tho...but a clear heatpeoof paint should work well in theory..

  • 2 weeks later...
  • 1 year later...

Rubbing the lenses back and clear coating them is the best option.

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

I've never seen them fade on the inside. If they're that stuffed, find a replacement set.

Digging up an old thread here, getting desperate.

Mine are pretty bad, followed a lot of advice via SAU and my mechanic who reccomended to buy a headlight restoration kit, but much of the discolouration is on the interior, not exterior.

I've just tee'd up a cut and polish for mine (black, looking very dull at the moment) and was wondering who might be able to do this work for me as I'm not that comfortable whacking parts of my car in the oven :P

Where are you located mate?

  • Like 1

Where are you located mate?

Latrobe Valley, Victoria - had a recent cut and polish done, cherry glaze etc (came up a million bucks) and spike of the lights, was quoted 100 per light. Sound about right? Not sure if that's interior or exterior.

I know some of these guys are just gonna be like "get new ones" but id rather have a crack at another solution before I dish out bulk coin because they are quite expensive

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Join SAU NSW for a flame-grilled feed & flame-spitting cruise! Sunday 17th August 2025 3:30PM Meeting Archies Flame Grille Sylvania Waters 4:45PM Cruise Departure 5:15PM Arrival at Cape Solander Kurnell Meet Location: Archies Flame Grille Final Destination: Cape Solander Kurnell *Disclaimer* There will be a lead and follow car so no one should get lost. If you would like to attend or bring others along please put your name down and a +1 as numbers will be needed prior! This is NOT a race and we will all be adhering to all road rules. If this is what you want please come to one of our many track days. This is an official SAU:NSW event and will be run under a CAMS permit. One of the things that really sets our club apart is our commitment to being true enthusiasts. When on normal roads we strive to maintain good relations with the authorities as well as the public in general. When attending one of Skylines Australia NSW events please try to: • Be aware of surrounding environment and act accordingly. • Drive courteously on the state’s roads as a true enthusiast should. • Understand how important it is to maintain the good name of SAU NSW and thus, treat others accordingly. • Any misbehavior will not be tolerated and you will be asked to leave.
    • Yeah good luck out there! Will be good to see a mighty GTST going harder than the GTRs
    • i will be there 😁
    • Hello!  i just finished manual swaping my r34 skyline with a r33 rb20de box(RB71C)box  When the car is running it squeaks crazy loud and it was smoking from the gearbox area. The gearbox is fine it was tested. The clutch slave cylinder seems like it doesn't fully releases the clutch. I want to ask if this noise is from the throw out bearing or could it be the clutch assembly or disk att.xFliq87Gzw6kImKBVqDebXkj0fBqymk0JaYeP3_3SlM.mp4
    • A few small updates since the previous post and lessons. I decided to do a little interior light upgrade on the 110. I quite like the iilumo items, even if they're a bit of a premium over other brands. You'll also note the Stedi Fogs, that will go into the S15 fog lights as I needed to match the bulbs since I got the new ones earlier. I hope they fit as the body is quite a bit longer than your normal bulb.  Annoyingly, I managed to trip the fuse, which normally wouldn't be an issue until I located the fuse. I can't say I've ever come across this. I had lucked out that someone nearby had a spare, but oddly enough Toyota dealerships seem to keep this in stock. I ordered some to keep in my stash and as luck would have it, someone else nearby tripped the same fuse so I passed on the favour.  I also did a little service on the 110 ahead of some additional work coming up. It's been annoying that Goleby's stopped carrying this particular HKS filter for the 110, so now I need to keep them on order from Japan. I also took the opportunity to install a bash plate and number plate riser. The plate riser is such a cheap but nice fix to help really tidy up the car. I'm tempted to now also replace my headlights, on this car. Both items were from Project Aero.    I also needed to replace the rear tyres on the 110, and after trying to get it aligned learnt that I need to replace some bushes in the front end, so that's next.  Closing out this update with a nicer picture as always! 
×
×
  • Create New...