Jump to content
SAU Community

Recommended Posts

Hey guys

I have been trying to figure out how my stagea goes with fuel.

I have done my research and seems normally they should do 400kms per 60l tank.

I drive 80kms to and from work every day so I do 400kms a week. I fill up $70 premium every Monday and lasts till Saturday. Premium price varies obviously.

Works out about $14 a day for 80kms

What's everyone else getting. Does my figures sound about right or is my stag using a lol too much fuel??

Kris

Link to comment
https://www.sau.com.au/forums/topic/440997-fuel-consumption-hows-your-c34/
Share on other sites

  • Replies 42
  • Created
  • Last Reply

Top Posters In This Topic

You should talk litres per hundred to be more accurate.

Mine is a rwd with rb30 bottom end. To and from work 12ks each way uses 13.3 litres per hundred. Have been meaning to tidy up cruise part of tune for a while as I think it could be better.

I'm assuming your commute to and from work contains some freeway/highway driving?? 11.25 sounds very good...You have to remember Stagea's (S2 I think...dunno if the S1 or the M35 is the same) have a 68L fuel tank in them

On the other hand - check out http://www.skylinesaustralia.com/forums/topic/167866-stagea-fuel-economy/ - There is a discussion thread on fuel economy

Edited by BigDirtyJase

S2 c34 rs4s gets 400km from 3/4 tank (have never run it into the last 1/4) if I drive like a total nana with only one or two slight boost moments. 350km if driving a little more spirited. Driving on the highway between adelaide and melbourne I got 550kms approx.

(I dont know how big the tank is to do ltrs/100km) but would assume its between 13 and 16 lt/100km average. Fair heavy considering the charger (with a 4.3ltr 4bbl auto) does about 15-17 lt/100km.. and it weighs about the same lol

Edited by staglover

Is there a system available for the c34 that can do the same?

Not sure, all the searches on Japanese Yahoo auctions searches came up for M35.

There are a few guys that can do the language conversion software, and the units are worth nothing in Japan, basically throw away $40 nzd. I guess it must link info from diagnostic software/on board computer to the nav screen?

Is there a system available for the c34 that can do the same?

Yes, it is called ECU Talk, here is a link for it,

i have one in my car, it is useful not only for L/100km but all other diagnostics.

can be used with a laptop and consult software to check for faults.

great investment http://www.ecutalk.com/consultlcd.aspx

S1 RS4V - does around 12.5-13L/100km "round town" ie Canberra roads. Country highway is 11-12L/100km, freeway is on the lower end of that.

Fuel economy improved ~1L/100km when I installed a hypergear hi flow turbo and a mv auto stage 2 shift kit.

Can't say scientifically which did what improvement, but my money would be on the turbo.

S1 rsfour, manual converted.

Only engine mods are rear resonator and big fmic.

14l/100km regardless of hwy or town driving.

Pretty much 100km per 1/4 tank or 400km/tank, I always fill up at around 350km.

ive found a noticeable change in fuel economy since having a stage 2 shift kit fitted to my S1RS4

Its possible, though I can't think why. The box runs a slightly higher line pressure, so if anything there should be more energy lost through the transmission. Perhaps not enough to make a difference on economy. MV autos said it shouldn't make a difference.

The larger turbo should be less restrictive and doesn't spool up at the whiff of a throttle. It now stays off boost unless Im giving some throttle over 3k rpm. That should be more efficient with the stock ecu.

Still, everyones results may vary. I read a post once saying that the stage 2 kit would effect the lock up converter, and I havent found that to be the case at all. Can't see how it would be either.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...