Jump to content
SAU Community

Injector Help!

wild31

By wild31,
in Engines & Forced Induction

 Share

Recommended Posts

wild31 Collaborator

wild31

Posted
Posted

Hi, hope someone can help me at this early hour, now it's abit irrelevant but I'm going to ask anyway. Now I have a ba xr6t (family shopping trolley) just a tune etc, but maxed out injectors, question is will my injectors from my rb26 work in the xr6t? I know the plug is different. But I'm running out of time and this would only be a temp fix. As gtr is off the road ATM, and I entered the xr6t in powercruise this weekend and havnt been able to get it on the track as I can't give it full jandel! As it's starving for fuel. Yesssssss I know I could go buy some. But I ain't got no bloody money at this point in time, as I spent it on tune etc on Thursday for this weekend thanks In advance for your help

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/
Share on other sites
wild31 Collaborator

wild31

Posted
  • Author
Posted

Because I needed a solution yesterday. Doesn't matter now. Car was entered at powercruise, but was unable to get full throttle down as it would just cough n splutter, and I have a set of injectors here looking at me, and just needed to know if they were usable or not. All good now it's over. Also fried the brakes on the xr6 t. P.O.S!

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7245042
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

Less boost would have been a good start, but it wouldn't have done good skids.

I can only suggest a set of injectors, pretty cheap in the scheme of things. Sell your two small sets and buy a set of 1000's off me, would cost you nothing to upgrade to a decent set of Xspurts.

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7245289
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

Unless MAP sensored ecu.

If the boost was beyond the mapping of the tune it would perhaps dump fuel to protect itself. I know if I was your tuner, and knew you were a fiddler, I would protect the hell out of it.

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7246528
Share on other sites
wild31 Collaborator

wild31

Posted
  • Author
Posted

You know this is referring to my xr6t. It was a custom tune on there Dyno, using a sct x3 flash tuner I picked up. Got improved 30 rwkw then injectors were at 95%. He said he got most gains threw timing adjustment. And only got to put one pound more boost in, couldn't push it any further as it's a safe tune for a daily driven shopping trolley. It surges under full acceleration due to not getting enough fuel! It's a simple thing that happens to all of them as soon as you want more power.

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7247094
Share on other sites
wild31 Collaborator

wild31

Posted
  • Author
Posted

Well, well, well!........ ( 3 holes in the ground) one would be left hoping that this is not the case, after paying for a proper tune, on the Dyno, rather then just uploading a flash tune, which IMO, isn't the best thing to do. So I've got 60lb injectors, just gotta get an intank pump, then I'll be taking it back. And it will be retuned at no cost.

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7247587
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

Why wouldn't the tuner charge you? He tuned it on the crap you had, pushed it hard like you asked, and suddenly he is at fault when something changes on the car?

Pushing an injector past 80% is engine suicide, as there is no protection in the map to dump fuel when something goes wrong. Being a Ford doesn't help, as they are renowned for falling apart.

Did you buy second hand Siemens 60lb injectors? Don't cheap out on the pump, it will be working hard and there are a lot of knockoffs floating about on ebay etc.

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7247946
Share on other sites
wild31 Collaborator

wild31

Posted
  • Author
Posted

Something changing? Was that way when I took it home, which was the night before powercruise. I didn't ask him to push it hard? The mrs uses it as a f**king daily. I asked for safe, reliable. Not a Dyno sheet queen. Which apparently wasn't available due too printer running out of paper. And tbh champ your talking like you know word for word, the conversation I had with the tuner? It was a simple question. It maybe be a ford, but I've owned it 2 months less then my gtr. And the ford hasn't spent most the time in the garage, due to things falling apart. Unlike the gtr. By the way your pissing me off with half cocked comments, so pipe down or shape up.

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7248382
Share on other sites
zebra Grand Master

zebra

Posted
Posted

Something changing? Was that way when I took it home, which was the night before powercruise. I didn't ask him to push it hard? The mrs uses it as a f**king daily. I asked for safe, reliable. Not a Dyno sheet queen. Which apparently wasn't available due too printer running out of paper. And tbh champ your talking like you know word for word, the conversation I had with the tuner? It was a simple question. It maybe be a ford, but I've owned it 2 months less then my gtr. And the ford hasn't spent most the time in the garage, due to things falling apart. Unlike the gtr. By the way your pissing me off with half cocked comments, so pipe down or shape up.

lol

phaggot

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7248387
Share on other sites
scotty nm35 Grand Master

scotty nm35

Posted
Posted

So you actually asked your tuner for a tune which would push the injectors to 95%, and you think it was in some way safe?

Not trying to piss you off, just can't get my head around what you want to do. You can't modify a car and just ignore the fuel system, no matter how broke you are. It ends in tears every time...

I have the cheapest injector pricing in the country, if I can help you afford a decent set let me know. I'm here to help, half cocked or not.

Link to comment
https://www.sau.com.au/forums/topic/441245-injector-help/#findComment-7248606
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • TurboTapin
      R32 GTST - 600KW+ RB28/CD009 Build

      By TurboTapin · Posted

      Well, my new WMI system took much longer to finalize. I actually missed my dyno appointment last Friday and lost my 150$ deposit. I'll be going back in the next week or two.  To sum it up. I only kept the AEM tank from my old setup. I replaced the AEM pump with a higher flow/pressure ProMeth 30GPH pump. I also swapped over to a 6AN low pressure feed line to the pump from the tank. There's also a pressure switch you cannot see on the pump high pressure line.    This is feeding 6x 200CC direct port nozzles and 1x 500CC Pre Throttle body nozzle. All fittings are Swagelok, because well why not. I also have a 300PSI pressure sensor up front.    I now have my Haltech ECU controlling everything. I start my pump with a basic relay at 5PSI and deadhead it. I then PWM a 3000CC methanol Injector to control flow starting around 10psi. The pressure switch in the trunk, along with my tank level are safeties before I ever get to 10PSI, and then I use my pressure sensor upfront as a secondary safety to cut the WMI and corrections in case the injector blocks or a line ruptures.  Wish me luck on the dyno!    
    • TurboTapin
      Jacks that fit under GTR lips that can reach the subframe?

      By TurboTapin · Posted

      So, I'm back with bad news. There's no jack long enough on this planet that will reach the front subframe. If by some chance there is, it would weigh 200lb's.  I purchased a long reach jack... The damn thing weighted 120lb's and was massive. Didn't even come close, was still short at least a foot. It was a pain, but I brought it back. Next I decided HA! No problem, I'll get an Extra long reach jack. Well, I couldn't lift the box... It must have weighed 160LB's and luckily there was an open box in store. I took measurement and was still nowhere close.  Sadly I've lost hope and have accepted defeat. 
    • suko
      J50 clock date suddenly reset to January 1

      By suko · Posted

      Thanks for that tip, niZmO_Man. I think the battery is OK. It's quite a new one, but I'll check. Last time I needed a new battery, everything electronic was fine, except that there wasn't enough current to turn over the starter. I decided to order one of the partial AV system translation CDs from Car Audio Workshop in NZ. That might have some effect, or help me diagnose the date problem. 🤞
    • Dose Pipe Sutututu
      Chris' Toyota Mark ii JZX110

      By Dose Pipe Sutututu · Posted

      I suppose it was relatively stock too, the JZ motor handle most mods thrown at them without even breaking a sweat 
    • MBS206
      Starter motor replacment teeth count.

      By MBS206 · Posted

      I saw your intro update, are you sure you've actually had a starter motor failure? You mention it could be the alarm causing it. I'm assuming you've got a no start issue, but what are the exact symptoms, as there could be a few reasons it has stopped wanting to start.
×
×
  • Create New...