Jump to content
SAU Community

Recommended Posts

I'm thinking of going and having a look at this: link

Per your link the VIN number for this car is: 6U900000J50111131 therefore chassis number would be: J50-111131

This does not appear to be a genuine chassis number - check it via your favourite month of production tool. Even if it is, they cannot sell you the car yet because it does not have a compliance plate. But lets see what happens when we change just one digit and make the chassis number: J50-101131

1) We have a compliance plate for this chassis number - interestingly enough complied by a workshop in Abbotsford VIC, the same suburb as listed on the eBay Ad

nl8Lox1.png

2) Auction sheet for this car:

Bh6fCFe.jpg

3rSJzmWs.jpg 6swhi3ks.jpg

Sold at CAA Chubu for 1,558,000 yen

Please note I am not suggesting that this is necessarily the same car - you could only tell by going to the dealership and checking the VIN by looking at the compliance plate.

My point is - be very careful and do your homework.

  • 5 months later...

Hey guys this is my first post (only recently started to read these forums) but just wanted to let others know about the experience I’ve had with the car in this thread and the dealer Carizma in Melbourne.

I saw this car about a month ago and was very interested, being unaware of the issue of odometer tampering on imports at the time. After being reassured by the dealer (Ross from Carizma) that the odometer reading of c.26,900km on this car was genuine, decided to put a deposit. I first felt something was off when the KM’s were not on the export certificate (tried to attach below, chassis number J50-101131 matches the auction sheet above) provided by Carizma and when I asked the dealer, they told me that the "17738" was probably the KM’s when it clearly was not. These guys have been in the business for over 15 years so alarm bells started ringing when they acted like they didn't know how to read an export certificate. After I told them I wasn't comfortable purchasing the car without a valid document stating the KM’s, they refused to refund my deposit but offered to import a car for me.

That process hasn't gone too well either but I won’t go into that here, honestly would just like my deposit back, but these guys keep refusing so I will go through Consumer Affairs or VCAT. Hopefully this helps someone else looking to buy this crossover and as with dodgyimports point above – be very careful and do your homework.

Edited by uncledrew
  • 1 month later...
  • 2 years later...
On 4/3/2014 at 12:09 PM, dodgyimports said:

Per your link the VIN number for this car is: 6U900000J50111131 therefore chassis number would be: J50-111131

This does not appear to be a genuine chassis number - check it via your favourite month of production tool. Even if it is, they cannot sell you the car yet because it does not have a compliance plate. But lets see what happens when we change just one digit and make the chassis number: J50-101131

1) We have a compliance plate for this chassis number - interestingly enough complied by a workshop in Abbotsford VIC, the same suburb as listed on the eBay Ad

nl8Lox1.png

2) Auction sheet for this car:

Bh6fCFe.jpg

3rSJzmWs.jpg 6swhi3ks.jpg

Sold at CAA Chubu for 1,558,000 yen

Please note I am not suggesting that this is necessarily the same car - you could only tell by going to the dealership and checking the VIN by looking at the compliance plate.

My point is - be very careful and do your homework.

Hi! I would like to check Action sheet for imported car that I would like to purchase. How can I get Action sheet? Thank you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • So....to find any R chassis part number, get your VIN (will be something like ER33-xxxxxx for you) and go to: https://www.amayama.com/en/genuine-catalogs/nissan and enter it. From there you have access to a web version of Nissan's part system, FAST. It is a bit tricky to get used to, so maybe have a shot and post up what you think.  You can also search by general model but note in some cases your car might have different options so VIN is safest.  On diagram 211 I got 14075-75T16 for Connector, Water Hose If I search for part 14053‑21U10 that you posted, that is also a water hose but not the one bolted to the plenum and 14075‑04U00 is the fitting where the water hose goes into the block.
    • Yeah now we are talking I much prefer coolers in the front middle because it lessens the chance of a small bump to a corner stopping the whole event. I was thinking the AT cooler can move out of the radiator, delete the AT/engine coolant interwarmer and mount a separate cooler with a thermoswitch somewhere further back as is common in racing, that would be one thing. Beyond that, the engine oil cooler is an obvious one to move to the wheel arch, potentially one on each side, but unused space is an issue. I did have a earlier pic with the bumper off but it doesn't show how busy the corners are: DS is full of the auto driving sensors and PS is totally fully of windscreen washer fluid reservoir But ultimately I was hoping to keep the AC, and the water/air heat exchanger is fundamental so it is not just the radiator that needs to be in front BTW here's airflow to the rad as it ran at the track (one horn is gone now and I'll remove the lights next time):
    • your right the maps for Australia came out in 2017 but are 2010 maps. i got the updated maps SD card put it in and it was the same. Same maps in my Brothers Nissan Patrol. 2020 i think his car is
    • Yeahhhh, the costs have killed me. Spent more than the cost of an engine rebuild and it most mostly servicing and a tune lol.
×
×
  • Create New...