Jump to content
SAU Community

Rb20Det Loud Knock After Spark Plug Change

Leeroy94

By Leeroy94,
in Forced Induction Performance

 Share

Recommended Posts

Guilt-Toy Grand Master

Guilt-Toy

Posted
Posted

take all the plugs back out again, and check them.

was the white part of the plug cracked? did you remove the old plug properly, sometimes if you have the socket on a bit of a angle it will crack the plug and bits will go inside the cyl then can get stuck in the valves and cause all sorts of issues.

always use BCPR7ES plugs gapped to .6 (if you got coil issues)

btw love the ghetto old school extra injector setup.

Link to comment
Share on other sites
Leeroy94 Enthusiast

Leeroy94

Posted
  • Author
Posted

Yes the white part of the plug had snapped. I just replaced them all. I looked around but no one sold bcfr7es.. Only online but it would have taken too long to get to my house so I thought I'd go with the 6 rating plug instead.

Link to comment
Share on other sites
Dan_J Veteran

Dan_J

Posted
Posted

to confirm if its head related your ment to put a tiny bit of oil in the spark plug hole before comp test, this will seal whats ment to be sealed and comp result will go up confirming issue with the head.

when i broke my 20 ( air leak past afm + over heating+ on limiter ) it was a much more louder and metallic sound

Link to comment
Share on other sites
cherring Proficient

cherring

Posted
Posted

Yes the white part of the plug had snapped. I just replaced them all. I looked around but no one sold bcfr7es.. Only online but it would have taken too long to get to my house so I thought I'd go with the 6 rating plug instead.

Go to Repco, they carry those plugs in 0.8mm gap, run them on my RB20

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • GTSBoy
      R32 non hicas power steering solenoid issues!

      By GTSBoy · Posted

      I have no idea what the power steering control module is on a non-HICAS car because I've never seen one. But it is a fair bet that is essentially the same thing as on any other Nissan of the period with variable PS. So, Maximas, that sort of thing. It will pick up the ECU's speed signal off the "bus" (there's not really a bus - any consumers of the VSS are all just connected to that output on the ECU). The output should (most likely) be a PWM signal to give you an effective average voltage between the minimum and maximum values. You could possibly look at the HICAS part of the R32 manual to see what that range is likely to be (for non-HICAS, as it should be about the same).
    • Heyyob22
      Parts required for 4:11 diff gears in an R34 GTR Vspec (A-LSD)

      By Heyyob22 · Posted

      Thank you for the info!    Did you get a 33 gearbox speed sensor to have your speedometer to work? Does the Speedo work but not accurate? 
    • Duncan
      Duncan's Race Car - The Most Overdue Build Thread On Sau

      By Duncan · Posted

      Took me a while to answer that.... Funny thing is, the across the river neighbour did put in an airstrip, built a hanger, and buy a cessna, because strangely they aren't allowed to build a house on the property but there is no problem building an airport terminal They've used in 3 times, once for an attempted landing where they misjudged a little, aborted and missed the trees by so little that new underwear was required. Second time the landing stuck, then a few weeks later the plane left and never returned, so I don't think aircraft noise is going to be an issue. Funny looking back through the last few posts too, I've spent a heap of time lately redoing the roads  and drains so I guess it is a 2 yearly thing to add to the calendar. Those big drains did overflow in the rain about a month ago so that is pretty disheartening....just a reminder that you can't stop nature I guess.
    • D.phantom
      R32 non hicas power steering solenoid issues!

      By D.phantom · Posted

      So I’m having issues with my power steering. the obvious heavy and light and comes on and off randomly now it’s constantly heavy. I’ve read through forums regarding this issue and what I’ve gather is that it’s referring to hicas deletion. That’s the problem mine didn’t come with hicas.    I’ve rebuilt the steering rack, pump, changed the bent hardline on the rack and taken out the solenoid to clean and loosen up the actuator, applied 12v to get it moving. Roughly checked the loom to see if there’s any damage to the loom and nothing. Now I’m checking the wiring. I’ve tested the wiring to the solenoid and it’s fluctuating between 0.07v to 0.03v. Does anyone know what it’s supposed to be reading? 5v? Anyone one know how this all works? Is there a fuse in between? What else is it connected to? How does it connect to the speed sensor? A resistor fried in the ecu? Please help. It’s been years Thanks in advance 
    • niZmO_Man
      Chips/Dents in wheels

      By niZmO_Man · Posted

      that's pretty good condition, those chips are nothing. Get a mobile repairer to sort it out. Nice wheels, I had white 17's on my GT-R once, looked nice.
×
×
  • Create New...