Jump to content
SAU Community

Recommended Posts

Gday everyone,

Can anyone ID RB25 injectors with numbers A46-200 and 0121517 on them?

They are red.

Thinking they are the standard ones, however want to make sure. if they are bigger than standard will have them flow tested and serviced.

cheers

Link to comment
https://www.sau.com.au/forums/topic/442206-id-rb25-injectors/
Share on other sites

sidefeeds yeah??

they are not standard, standard are a greyish colour.....what are they out of?

red injectors i know of include, S15 480cc, Nismo 740cc and pulsar 260cc...

they all look similar except nismos are more red where the others are maroon

maybe post some pics up

hmmm, a quick google search said they might be nismo 720 injectors but i didnt believe it.

Out of an R33 RB25.

i think i read somewhere siliva injectors can be used in these fuel rails?

Ive attached a pic this time.

photo4.jpg

Although through all the searching im doing on A46-Z00 (the last number seems to be the batch number) is returning Nismo 740 injectors.

Guess ill have to get them flow tested to be sure!

More expensive way to deal with it, however i dont want to throw away 700 dollars worth of injectors that will suit what i need!

if ecu is stock they are not nismos. unless its got a nistune board in it or something and a46-z00 is pretty generic, its on all injectors of similar build regardless of size...its probably a batch number from the plastics casting company or something.....is it NA or turbo motor? more details on that would be more useful than any batch number

Its a turbo motor, it might have a computer without a sticker stating it does but i dont think so. The add did state it had upgraded injectors but i take that with a grain of salt!

Either way, they are being flow tested tomorrow. If they flow at 700 will give them a service and be all good. if not ill be in the market for some!!

Thanks for the help everyone, i thought there would be an easy way to ID these!

Heard back from the guys on thursday, I asked for a flow test on one first so it could be determined what they might flow before spending the money on a service and clean.

Came back with 100mil over 10 seconds meaning 600mil over 1 minute which all injectors are measured by. They are very gummed up and had bad fuel sitting in them.

Looks like they might be the Nismo 740s!! Great news. Also sheds light on why my car didnt start the other day.

So they will be cleaned and re-flowed next week and ill have a final figure.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • It is a kunfine Android screen . Does anyone know the wirering diagram of the fuga ??
    • just an update to this, poor man pays twice  Tried sanding down the pulleys but it didnt do the trick. Chucked another second hand alternator in the na car which I got for free off my mate and its fixed the squelling. Must have been unlucky with the bearings.    As for my turbo car, I managed to pick up a cwc rb alternator conversion bracket + LS alternator for 250 off marketplace, looked to be in really good nick. Installed it , started the car and its not charging the battery.... ( Im not good with auto elec stuff so im not sure if this was all I needed to do but I verified such by using a multimeter on the battery when the engine was running and I was only getting 12.2v )   I had to modify the earth strap for the new LS alternator , factory earth strap was a 10mm bolt which did not fit the bolt on the LS alternator which was double the size so I cut it off , went to repco bought some ring terminals that fit, crimped it onto the old earth strap and bolted it up to the alternator , started the car and same issue. Ran like shit and was reading 12.2 at the battery.  For a "plug and play" advertised kit thats not very plug and play but alas.  My question is , am I missing something ? Ive been reading that some people recommend upgrading the stock 80 amp alternator fuse to a 140 amp but I dont see how that would stop the alternator charging especially at idle not under load.  Regardless ive pulled it out and am going to get it bench tested by an auto elec tomorrow but it would be handy to know if ive missed something silly or have done something wrong.   
    • My wild guess is that you have popped off an intake pipe....check all of the hoses between the turbo and the throttle for splits or loose clamps.
    • Awesome, thanks for sharing!
    • To provide more specific help, more information is needed. What Android screen? What is its wiring diagram? Does the car's wiring have power at any required BAT and ACC wires, and is the loom's earth good?
×
×
  • Create New...