Jump to content
SAU Community

Recommended Posts

I have now sold both my skyline and stagea and about to move house, so time for a garage sale...

get on it!

R34GTT wheels painted black

Bridgestone Potenza S001 tires

$700

good condition 225/45/17

IMAG2850_zpsqn7qzknd.jpg

IMAG2853_zpsvzhatr82.jpg

IMAG2852_zpsja4khona.jpg

IMAG2849_zpssjidv2cb.jpgIMAG2848_zps4s5zxlac.jpg

IMAG2847_zps84jxdlnr.jpgIMAG2846_zpsdv68wfwk.jpg

R34 GT/GTT aftermarket front bar

$100

fiberglass with vents both sides. painted black, some scrapes and marks mostly on the underside where it is not visible. larger opening and shallow cut for FMIC, selling cheap cos its not coming with me.

IMAG2005_zpswnwgkw99.jpg

IMAG2006_zpswrhcepvr.jpg

IMAG2007_zpsf39fumhe.jpg

RB25-DET NEO genuine coilpacks

$100

one is weak and caused a slight misfire.

selling the full set of 6 but only expect to use 5

i dont know which one was missing,

great for replacing one or a few faulty packs on your R34 or C34 with NEO

IMAG2009_zpsl4qavwvx.jpg

RB26DET R32 GTR genuine coilpacks

$200

excellent condition genuine items

no missfires very minimal Kms, these were replaced with splitfires which felt no better to the genuine items.

can be used on RB20s as a good upgrade as i did on my 32

IMAG1639_zpsy4elbbvh.jpg

R34 GTR dash

$200

unknown KMS but i have been told it should read about 28000km from the previous expected owner

awesome condition, cannot fault.

can be used in a GTT,

great for manual conversion

IMAG1644_zpskrnmvxub.jpg

R34GTT RB25 Manual Tailshaft

$200

to suit coupe

great condition good unis.

open to offers but unlikley to ship

IMAG1999_zpsopldld5v.jpg

IMAG1998_zpsmbgeilrh.jpg

R34GTT stock exhaust (cat to rear muffler)

$100

great condition, great for trips to regency

(doesn't include the rear tips)

IMAG2856_zpsev2benrn.jpg

IMAG2857_zpsv7jsjgzz.jpg

C34 RS4S stock exhaust

$100

great condition, great for trips to regency

comes off an AWD

IMAG2855_zpsrathcbh7.jpg

IMAG2854_zpskmnpxpwu.jpg

  • Replies 51
  • Created
  • Last Reply

Top Posters In This Topic

Random FMIC

$50

no leaks however its dented in one side, just flip it over and happy days.

IMAG2861_zpsmsgsmj4a.jpgIMAG2862_zpss0tktbza.jpg

C34 Stagea passenger side headlight

$50

XENON passenger light, unsure on condition so selling cheap,

no broken mounting brackets.

IMAG2863_zpslkjsbvts.jpg

IMAG2864_zpsa6qjpvj0.jpg

C34 Stagea SII RS4S stock suspension

$200

great condition, removed for upgrade

kept for regency if needed.

to suit awd.

IMAG2859_zpsveudlk2u.jpg

C34 Stagea SII RS4S stock camber arms

$20

.....there just stock comber arms

IMAG2860_zps1mulggqg.jpg

Viper 350 2way alarm/ immobilizer

$50

brand new, in box never fitted with instructions

IMAG2865_zpslowzyddc.jpg

IMAG2866_zpsoq5753gm.jpg

Z32 AFM

$150

broken mesh but works perfectly, with plug

IMAG2179_zpsqjqxap0e.jpg

IMAG2176_zpsaehokhlo.jpg

R34 clear side indicators

$50

never used, brand new

IMAG1655_zps6lllfqhw.jpg

IMAG1656_zpsoaqasthw.jpg

Xenon globes/ phillips/ DR2 (R32)

$50

used, good condition 8000k

IMAG1636_zpsummirie9.jpg

IMAG1635_zpsbyrndbpe.jpg

Xenon globes with half wires (R32)

$50

used, good condition, 6000k ignore the cover

IMAG1638_zps5uza9ten.jpg

possibly more to come

SMS on O413 145 43O

PM here

parts located in Andrews Farm/ north of Adelaide.

can be taken to work in Thebarton

can be posted or freighted at buyers cost

glyn

updated list

taking offers on everything!

R34GTT wheels painted black w Bridgestone Potenza S001 tires - $700
RB25-DET NEO genuine coilpacks - $100
RB26DET R32 GTR genuine coilpacks - $200
R34 GTR dash - $200
R34GTT stock exhaust (cat to rear muffler) - $100
C34 RS4S stock exhaust - $100
Random FMIC - $50
C34 Stagea SII RS4S stock suspension - $200
C34 Stagea SII RS4S stock camber arms - $20
Z32 AFM - $150 !
Xenon globes/ phillips/ DR2 (R32) - $50
Xenon globes with half wires (R32) - $50
Stagea C34 cargo blind - $200

Tailshaft - SOLD

C34 Headlight - SOLD

R34 Front bar - SOLD

R34 indicators - SOLD

Viper Allarm - SOLD

Cleaning the shed, found more random small things that may be useful to someone...

2X R34 Doubledin stereo surrounds.

$40 each

no damage

IMAG2917_zpsnj18ygoy.jpg

R34 manual pedals

$100 each

also master cylinder and hardline, only whats pictured

IMAG2918_zpshiu9i1yd.jpg

BC coilover Cspanners

$50

they are what they are.

IMAG2915_zpsictznu69.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The car/ECU will have all the sensor that it needs and expect to have. I think i do not have to explain to you how the Link is way better specialy if you have swapped engine   I just do not want to deal with any "problems" cuz i have only Nistune which i learned is not that great and in my case cant even deal with that speed problem (Link can) And of course it will be way more easier to tune and diagnose and safe. And for the ECU/speed problem...i dont know.
    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
×
×
  • Create New...