Jump to content
SAU Community

Recommended Posts

I think both sides (talking globally here; not talking about people in this thread) have an arrogance that pisses each other off.

Cyclists that flaunt themselves on the road, taking liberties just to piss people off, and motorists that think the world revolves around them (ahem mums on the school run....) and nothing should ever get in their way.

Sounds to me like Daleo is a good example of a responsible cyclist, he isn't going to be the one taking up a whole lane on a single lane road, he'll wave you past when it's safe to do so. In turn, and in respect of that, I'd pass him giving him as much room as I safely can. That's all that needs to happen.

  • Like 2

I think both sides (talking globally here; not talking about people in this thread) have an arrogance that pisses each other off.

Cyclists that flaunt themselves on the road, taking liberties just to piss people off, and motorists that think the world revolves around them (ahem mums on the school run....) and nothing should ever get in their way.

Sounds to me like Daleo is a good example of a responsible cyclist, he isn't going to be the one taking up a whole lane on a single lane road, he'll wave you past when it's safe to do so. In turn, and in respect of that, I'd pass him giving him as much room as I safely can. That's all that needs to happen.

this.

and when I ride, I keep to the opposite side, so I can see on coming traffic.

I ride on the road(when no brake down/bike lanes are available), and move onto the mud/grass/gravel when a car does approach.

I want to see them coming.

that way, I can react accordingly.

I also dont wear a helmet (lets not get into that debate atm), and have never been booked for not.

but...

if I do get booked, my reaction will be taking an entire lane the entire trip.

because, thats the law....

dont ride much anymore, so doubt it will ever happen.

aaand, go...

this.

and when I ride, I keep to the opposite side, so I can see on coming traffic.

I ride on the road(when no brake down/bike lanes are available), and move onto the mud/grass/gravel when a car does approach.

I want to see them coming.

that way, I can react accordingly.

I also dont wear a helmet (lets not get into that debate atm), and have never been booked for not.

but...

if I do get booked, my reaction will be taking an entire lane the entire trip.

because, thats the law....

dont ride much anymore, so doubt it will ever happen.

aaand, go...

How is your crank bearing....?

Here's an interesting article from the US about the "Idaho Stop".
http://www.vox.com/2014/5/9/5691098/why-cyclists-should-be-able-to-roll-through-stop-signs-and-ride

It proposes some constructive solutions for getting bicycles off high traffic thoroughfares, which would be a win for both sides of the argument.

Not trying to inflame the situation, but there is some useful info in there, and the rule (or a version of it under a different name) has been in use in states across the US with fewer negative outcomes than the status quo.

Here's an interesting article from the US about the "Idaho Stop".

http://www.vox.com/2014/5/9/5691098/why-cyclists-should-be-able-to-roll-through-stop-signs-and-ride

It proposes some constructive solutions for getting bicycles off high traffic thoroughfares, which would be a win for both sides of the argument.

Not trying to inflame the situation, but there is some useful info in there, and the rule (or a version of it under a different name) has been in use in states across the US with fewer negative outcomes than the status quo.

Yeah, apparently cars are exempt from the laws of physics. Spot that line in there?

Frankly, I didn't think it was a very well written article, and it didn't sway my opinion that it is safer to have enforced stop and red lights.

If governments were serious about reducing carbon emissions, they wouldn't be installing traffic calming devices, red lights etc etc all the time. Imagine the carbon footprint of a new set of traffic lights over its lifetime?!

But that's ok, cause the government gets the cash from the fuel excise.... :/

Did you see the main point in there? Bicycles don't trigger the light circuit, so the lights will never change. I am sure many of the motorcyclists amongst us have blown a red for that very reason. I know I have had to many times over the years. Does this make me a criminal worthy of being stoned with spark plugs? Farkin wanker...

"Several states have similar "Dead Red" laws, which lets cyclists (and motorcyclists) ride through a red light if there's no traffic, if the cyclists have stopped for set periods of time, and if the light isn't changing because its sensor doesn't register bikes."

Yes, I can see that, after stopping for a set amount of time, the cyclist can proceed through the intersection. They might also be able to use that magical button on the side of most traffic lights that turns them red to allow people to cross... ;)

Anyway, thanks, when did I ever say I chuck plugs at cyclists....? I thought my posts were pretty neutral....

Wanker comment was directed at the bloke suggesting it.

Cyclists aren't allowed on the footpath, and quite often are clipped into their pedals. Magical button? It's for pedestrians. Yet again, there are no facilities for cyclists in most cases. These would need to be included in any bike rego process.

Wanker comment was directed at the bloke suggesting it.

Cyclists aren't allowed on the footpath, and quite often are clipped into their pedals. Magical button? It's for pedestrians. Yet again, there are no facilities for cyclists in most cases. These would need to be included in any bike rego process.

Carry a broom stick to push said button? :P

Then you can bash arsehole drivers who try to clip you, and also have a jousting session when you get to two lane bike paths! :D

  • Like 2

Bicycle jousting is the best solution this thread has produced.

Nice work Luke!

Brb, off to get a broomstick.

It wasn't saying that cars expend no energy to get moving from a standstill, just that the driver isn't the one physically getting the car moving again; unlike the bicycle.

Bicycle jousting is the best solution this thread has produced.

Nice work Luke!

Brb, off to get a broomstick.

It wasn't saying that cars expend no energy to get moving from a standstill, just that the driver isn't the one physically getting the car moving again; unlike the bicycle.

twasnt my idea, but I like it.

You shall be forced to mount the toddler tricycle for the first round of bicycle jousting.

Mmm K?

Nay, I shall be astride the toddlers balance bike.

Yea verily; it has newfangled yellow plastic wheels, and an ooga horn.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, is the HKS  Tower Bar still available ? negotiable ? 🤔
    • From there, it is really just test and assemble. Plug the adapter cables from the unit into the back of the screen, then the other side to the car harness. Don't forget all the other plugs too! Run the cables behind the unit and screw it back into place (4 screws) and you should now have 3 cables to run from the top screen to the android unit. I ran them along the DS of the other AV units in the gap between their backets and the console, and used some corrugated tubing on the sharp edges of the bracket so the wires were safe. Plug the centre console and lower screen in temporarily and turn the car to ACC, the AV should fire up as normal. Hold the back button for 3 sec and Android should appear on the top screen. You need to set the input to Aux for audio (more on that later). I put the unit under the AC duct in the centre console, with the wifi antenna on top of the AC duct near the shifter, the bluetooth antenna on the AC duct under the centre console The GPS unit on top of the DS to AC duct; they all seem to work OK there are are out of the way. Neat cable routing is a pain. For the drive recorder I mounted it near the rear view mirror and run the cable in the headlining, across the a pillar and then down the inside of the a pillar seal to the DS lower dash. From there it goes across and to one USB input for the unit. The second USB input is attached to the ECUtec OBD dongle and the 3rd goes to the USB bulkhead connected I added in the centre console. This is how the centre console looks "tidied" up Note I didn't install the provided speaker, didn't use the 2.5mm IPod in line or the piggyback loom for the Ipod or change any DIP switches; they seem to only be required if you need to use the Ipod input rather than the AUX input. That's it, install done, I'll follow up with a separate post on how the unit works, but in summary it retains all factory functions and inputs (so I still use my phone to the car for calls), reverse still works like factory etc.
    • Place the new daughterboard in the case and mount it using the 3 small black rivets provided, and reconnect the 3 factory ribbon cables to the new board Then, use the 3 piggyback cables from the daughterboard into the factory board on top (there are stand offs in the case to keep them apart. and remember to reconnect the antenna and rear cover fan wires. 1 screw to hold the motherboard in place. Before closing the case, make a hole in the sticker covering a hole in the case and run the cable for the android unit into the plug there. The video forgot this step, so did I, so will you probably. Then redo the 4 screws on back, 2 each top and bottom, 3 each side and put the 2 brackets back on.....all ready to go and not that tricky really.      
    • Onto the android unit. You need to remove the top screen because there is a daughterboard to put inside the case. Each side vent pops out from clips; start at the bottom and carefully remove upwards (use a trim remover tool to avoid breaking anything). Then the lower screen and controls come out, 4 screws, a couple of clips (including 3 flimsy ones at the top) and 3 plugs on the rear. Then the upper screen, 4 screws and a bunch of plugs and she is out. From there, remove the mounting brackets (2 screws each), 4 screws on the rear, 2 screws top and bottom and 3 screws holding in the small plates on each side. When you remove the back cover (tight fit), watch out for the power cable for the fan, I removed it so I could put the back aside. The mainboard is held in by 1 screw in the middle, 1 aerial at the top and 3 ribbon cables. If you've ever done any laptop stuff the ribbon cables are OK to work with, just pop up the retainer and they slide out. If you are not familiar just grab a 12 year old from an iphone factory, they will know how it works The case should now look like this:
    • Switching the console was tricky. First there were 6 screws to remove, and also the little adapter loom and its screws had to come out. Also don't forget to remove the 2 screws holding the central locking receiver. Then there are 4 clips on either side....these were very tight in this case and needed careful persuading with a long flat screw driver....some force required but not enough to break them...this was probably the fiddliest part of the whole job. In my case I needed both the wiring loom and the central locking receiver module to swap across to the new one. That was it for the console, so "assembly is the reverse of disassembly"
×
×
  • Create New...