Jump to content
SAU Community

Recommended Posts

Hey Guys,

Recently I started having an issue with my HICAS, every couple of minutes the light would come on the dash(even when stationary) which would be followed by a fluctuation in revs and slight noise from the rear end. Now it has gotten a lot worse, when the HICAS light comes on now its very erratic, stiffens up my steering wheel and slightly jerking it and every now and then shuts down my stereo while the light is on the dash. Last night even switching my headlights on seemed to get a rise out of it. Could this be from a bad earth somewhere that is effecting these systems?

It has an aftermarket stereo and turbo timer fitted but they have been in for over a year now and problem is only around a month old.

I still have standard steering wheel and last mod was long before the issue started.

Link to comment
https://www.sau.com.au/forums/topic/442956-hicas-creating-havok/
Share on other sites

Certainly sounds like a wiring issue. Being that HICAS components exist at the front and rear of the car, its going to be a bit of a pain to diagnose which part is causing it. Seen as its messing with your stereo and headlights I'd start inside the car, may have to pull the dash out and just have a look at all the wiring. Not very helpful but its a bit of a hard one to diagnose without being there

The #1 concern with these old HICAS computers these days will have to be whether the electrolytic capacitors inside them are still OK, or if they are dying and causing all sorts of other shit to fry in there. I'd be having my HICAS controller apart on the bench in seconds if mine started doing this.

How old is the battery?

Haver you checked the tension on the alternator belt? (R32 is notorious for not liking bad voltages).

Battery is only 1 year old still has good charge. I'll check the belt tension out

The #1 concern with these old HICAS computers these days will have to be whether the electrolytic capacitors inside them are still OK, or if they are dying and causing all sorts of other shit to fry in there. I'd be having my HICAS controller apart on the bench in seconds if mine started doing this.

I have had the controller open and everything looked sweet, didnt test the capacitors though.

I plan on getting a lockout kit in a couple of months but if theres an electrical issue somewhere I want to sort that otherwise I'll still be having issues elsewhere. Going to try and clean up current earth's and add another and checkover as much wiring as possible to see if I can find any damage

Edited by Spartan-117

Update,

on the way to auto electrician it died in the arse. 1km away SOB. Melted the fusible link off positive terminal. Definitely something not happy somewhere in the car.

I'll update with an outcome from sparky

The standard connections for the fusible links were the problem all along, seen bottom left in picture. Removed the standard connection and just put ring ends on wires and connected directly to battery.

They werent getting enough power from the standard aged connections so HICAS was first system to get the shits with it.

13917104415 bcf4ba2dfa B

All good now, no more warning lights no more dramas

Because this

What now? HICAS would be the exact opposite of what you want in a car to make that sort of driving enjoyable. The whole time you are flinging it sideways the bloody HICAS would be fighting you for control of the rear end because it has no idea what the hell you're doing.

HICAS is a miserable attempt to make a front heavy RWD chassis feel like it has faster turn in than it natively does. Below 7/10 driving its veneer of snappy turn in is acceptable. Above 7/10 it makes the car feel like it's trying to kill you.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...