Jump to content
SAU Community

Recommended Posts

Hey guys, i got a little bit of an issue. A few days back i decided to get my car mildly tuned (after some minor modifications) for 98 ron fuel and driveablitiy. Towards the end of the tune, the car was making much more power across the rev range however, the tuner stated it should be much higher provided the amount of boost the car was running. He then checked a few bits a pieces and then noticed the compressor wheel on the turbo was damaged, it had a few pieces missing and looked like it shaved a bit of the turbo housing.

So basically i need a new turbo, however this tune cost me 880 dollars, Seeing as the boost is adjusted via the solenoid, will getting the exact same second hand turbo throw this tune out the window?

Link to comment
https://www.sau.com.au/forums/topic/443250-will-swapping-a-turbo-ruin-a-tune/
Share on other sites

If your swapping a stock turbo for another stock turbo, then it wont be too bad.... just not ideal. Of your running anything other than a stock turbo, then yes, your tune will need to be adjusted.

Cheers

J.

^WHS

Will you be replacing with the same model turbo? A 'touch-up' tune should cost less than $200 to check for knock, AFR's and so on...

If it's an entirely different snail, then it might be debatable. $880 is steep though.

  • Like 1

Yep. One of my mates is getting stung with the 'oh there was a foreseeable problem, but I didn't bother telling you. Come in for another tune for $700'

You'll need another tune if it was really down on power for the amount of boost he was putting in. Think about it... Once you put a new turbo on it will run lean.

  • Like 1

Yea most like be the exact same turbo, only thing different would be the nozzle are going from 9.0t to 9.8t (seeing as i cant find 9.0t anywhere).

If its just an extra couple 100 for the tune up then ill probably do it asap, another 880 then ill just stick with my current setup =='

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • A 1.5 way is a 2 way. It is just a 2 way with a less aggressive ramp on overrun.
    • The ABS and/or TCS being missing/broken will not cause the engine to misbehave. It just casues CEL to come on and annoy you. The CEL is useless if it is always on, so you have to do the things you have to do to get rid of it, so it can be useful. Being a Stag ECU, then yes, it will not expect TCS to be present. But it will expect ABS to be present and working. You will need to either make the ABS CU talk to the ECU (don't ask me what that will take on an NA R34), and make sure the hardware is working....or, you just need to blank it out in Nistune. Do not persist with the stock ECU. You will just have problems. Gte it Nistuned. Start from there. DO YOU HAVE A BOOST SENSOR? The ECU's boost sensor that it. It is connected to the loom at the rear of the coil cover. Usually rides on the firewall on an R34, but is usually bolted down to a bracket along with all the other crap at the back of the coil cover when a Neo is dropped into another car. If you do not have it, the ECU will shit the bed. So, do you have one?
    • So sadly the fuel pump etc was not it. The pump and filter is new and it is still cutting around 4000 rpm. A read something about ABS/TCS (engine is from stagea and ECU too so no TCS) and i dont know for 100% that my car has ABS. It has ABS "cube" in engine bay but i dont think it works(or at least from my braking experience). Can be something like that?  I will be driving the car next week to Nistune tuner to properly see what is wrong...  
    • the Tomei LSD fluid with lsd kit. frustrated that it was shaking the car to crap and affecting everything else negatively, I pulled the diff last night, and removed the lsd carrier, could not find anything wrong, however it seem to be 100 locked up acceleration, and deacceleration, wondering if they sent me a 2 way not a 1.5??  either way I installed the stock open carrier back in place. test drove everything smooth as butter again. no shake, shutter, random, what felt like clutch slip and grab or drive shaft play, etc. something differently wrong in side the lsd. I might bother taking it apart (if possible) to figure out what's going on inside this carrier, as bought too long ago to return.  only draw back is its back to a one wheel wonder.
×
×
  • Create New...