Jump to content
SAU Community

Recommended Posts

I was looking at the Phormula kits, well priced. Are they as good as the Kmon? Anyone used one?

I've used the K Mon before (in someone else's car) - not that user friendly.. however not the Phormula Kits.. they do look sexy!

nice little unit I must say!

http://www.phormula.co.uk/Player.aspx?clip=KS3-Settings&title=Settings%20-%20KS-3%20Knock%20Analyser

I was looking at the Phormula kits, well priced. Are they as good as the Kmon? Anyone used one?

I've been looking at those as well... There are some good YouTube demonstrations of it.

You guys interested in buying it together to save on shipping? I could potentially see if they're willing to do it cheaper if we get 3x and we do reviews on the unit(s) on SAU and also my personal site trak-life.com

Yeah, hence "if you are serious" ;) I make do with a G4 Knock Block

hahaha probably will never be that serious, although I've had a few SR20DET boys recently with basic bolt-ons asking for road tunes. I have another one next weekend going on E85, I've already swapped the injectors & pump and touched up his tune to accommodate the new squirters - might hire a dyno again for this one.

I think the Phomula KS-3 will be more than enough for my needs (mainly 98RON), I find E85 doesn't really knock unless you really fuark up the timing.. usually you know timing is at its peak when the car makes no power when you add more timing in.. then again, I'm relying on the factory knock sensors and the aftermarket ECU to pump out some arbitrary knock value which could mean absolutely nothing as others have told me.

You guys interested in buying it together to save on shipping? I could potentially see if they're willing to do it cheaper if we get 3x and we do reviews on the unit(s) on SAU and also my personal site trak-life.com

Yep. Ask away. I have Paypal funds burning a hole in my hard drive. :)

Yep. Ask away. I have Paypal funds burning a hole in my hard drive. :)

KS-3 OR KS-4?

KS-4 has outputs so you can setup closed loop ignition feedback on certain ECUs to retard timing on knock OR whatever your heart pleases

Yep. Ask away. I have Paypal funds burning a hole in my hard drive. :)

actually...no.... ks-pro kit. the ks-4 doesn't have headphone output.

looks like we need 5 kits, but we get 15% off and free delivery!!!

Thanks for your email.

If you can get more than 5 units sold, I’ll authorise a 15% discount and offer free shipping to a single address in Australia. If you have anyone interested in other products or accessories we can extend the discount across those too. Hopefully that keeps things nice and simple.

KS-4 RRP £295… Group Buy £250.75.

KS-3 RRP £235… Group Buy £199.75.

Please let me know if you need any further information and I’d be glad to help.

Best Regards,

Anthony

right... So ive pretty much fixed it. I Reset CAS timing with the haltech, The cas WAS at 10* for some reason while the ecu thought it was 15*. .. anywho they are in sync now. no more knock issues..

Also installed a Walbro 255, Car runs very well now, still running some pretty light timing (15-16* or so at peak torque) great afr's all the way to redline (6500 currently) but im ALMOST out of injectors. like 90% duty cycle. so thats definitely coming soon.

Just to add add to what I wrote.

On the previous page op said he is using the oem knock sensors.

To me that's a fail.

And is unsure of the correct settings, and even mentioned he was registering knock when it wouldn't really be possible.

He then advanced the timing 5 degrees and it fixed it.

This is not a thread about how useful knock detection is.

It is is a thread about how having things you don't understand can actually make things more difficult for you.

Go get your car tuned op! And let us us know.

Ah yes, I just skim read it and assumed he had it too far advanced,hence the knock, but it is indicating 5 degrees retarded isn't it,

OP, you are reading the timing marks correctly aren't you? Also using the correct technique to read the timing?. (I.e. not on the cold start map and also using cyl no 1 lead and not the 'timing wire')

I didnt fix the "knock" by advancing timing, as mentioned in a previous post about setting up the haltech with the cas ( using ignition lock and making the computer and engine insync) it was off by 5* I retimed the car using a better timing light 15* in the ecu was 10* in reality. ( all i know for sure is that the computer didnt actually know what the hell was happening)

Ben, it seems when you come to your own conclusion it gives you the right to be a jerk, I'm really not about the internet tough guy so if you feel like you have to be that way don't bother posting on my thread, thanks.

BTW, the car never saw harsh driving and full knock situations. I was how ever getting ignition retard to a degree because the knock sensor calibration was very high. Im not an idiot and i know what will and what will not blow up a motor.

I was at the dyno on friday with a friends rb25 s13 running a Sprint 500 and his timing is at 20* through peak range with NO knock. I am running around 4-5* retarded of what he is running with LESS boost.

JJman, the car has now been timed properly and is running exceptionally well. Next step is to install injectors and start dyno tuning.

Thanks for all your POSTIVE imput guys, much appreciated.

Edited by ConnorOrcherton

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Biggest thing is you're okay!   It sounds like between the accident, and the drive home, it was a pretty torturous trip again! On the bright side, you took the opportunity to enjoy the event more from the perspective of a spectator, than as an entrant!   Sad to see so much damage to the car. It really has taken a HUGE hit in the front end. If/when you choose to repair, hopefully the rails are straight (At least from shock tower backwards). Hopefully the extra cage coming through there has save most of the chassis rails, and HOPEFULLY saved the motor too. Best of luck when you eventually get motivated to start pulling it down to check it all out
    • Sounds more like what Brad said, that it's mainly transfer. What pad bed in procedure did you use, and did you replace/machine the rotors, or just swap pads?
    • The stutter is almost entirely in the pedal. I don't feel the brakes release and reapply as you would with ABS engaging but the pedal feels that way, without the brakes releasing. It only lasts for less than a second and the pedal is fine again. It's hard to explain, sorry.  I'll get under this weekend and just double check everything is tight. Fluid is at max where I left it.
    • What bedding in procedure did you use?   When you say stutter, what exactly do you mean? Like it feels like someone letting go of the brakes momentarily and regrabbing them again to get you to stop? Re-reading your post, and that is what it kind of makes me think you're explaining, like theres a little bit of a jolt, likely just as you're reaching a stop. I've only had this issue once. And if its caused by what caused mine, you will want to get the car up on stands again and check it over. Mine was a case of a caliper mounting bolt coming out and letting the caliper rotate on the other remaining bolt and gave play in a wheel as it came to a stop. But not every stop either!
    • Yeop... binned it   This will be a summary will not many pics atm and cbf  Fixed the samsonas - it was totally munched Put a new precision 7675 T4 on with proper split pulse mani Got to Sydney to get to car - drove to canberra to get racecar - drive back to sydney that night Next day all day at Plasmaman putting on new clamps cleaning some things up and adding another large engine oil cooler sitting at the rear above diffuser to keep things cooler Next day - Tuesday - on Dyno - killer wikid awesome pumped out really good numbers - more mid range and on lower boost levels Wednesday - first prac - all day again getting the suspension right - had to borrow front suspension again - out do a lap come in - out do a lap - in - what i had just couldnt handle the load at the more consistent higher speeds - got a lap in at the end of the day that was pretty reasonable  Put it this way that lap wouldve had me in 4th in Pro am for the whole event - with only 700 hp and used tyres Thurs first official prac day - lap out warm up - then entered a hotlap with above setting and 80% effort took corners 1,2,3 and into 4 car felt awesome -  rear came around out of nowhere bang into the wall near front on at whatever 140 kmph Done, over, gone Just one of those how did that happen apparently as all indications show nothing out of the ordinary Got to spend the rest of the time at the event like I hadnt done before - was actually Ok mainly as I had my family and my boy is 9 and got treated like a rockstar Long trip home, lost a trailer wheel in nowhere land, X5 airbag suspension gave up half way across nullabour and rode on bumps stops (its now completely fine) had to do a 19 hr drive day on day 3 as accommodation got screwed up so just had to keep driving till found a town with some Now to reassess - hopefully the motor and other things are OK but yet to be seen too. There is no easy fix there is no i'll just order that part and get it sent - we'll have a talk to people see what can happen and what the go is but at minimum its rebuild from scratch struts forward and alot of time effort and $ should and if I return and if but maybe/ when  I have the cage tied into the front strut towers - if I didnt have that things couldnt been worse you can say its just a front end but if you know what goes into these cars... you'll know what that actually means in reality   Car was very fast. Disappointing we just didnt get to show it Effort doesnt win you races though     Apparently this is motorsport !  
×
×
  • Create New...