Jump to content
SAU Community

Recommended Posts

Yeah, on the bike, it'd just be LOL!

What about when you drive the 86?

86 nah don't bother with drags, that car is all corners and a decently quick daily driver. If I was a fresh P plater I would, cause I'd be taking on Preludes and V6 Commodores and I wouldn't have been in anything faster, or beaten anything faster for that matter. I'm all about taking down fast Euro these days :P

Have put a Perrin exhaust on since you last saw it...sweet music to the ears when you rev it out...but now hunting down forced induction kits and then maybe the above will change :D

86 nah don't bother with drags, that car is all corners and a decently quick daily driver. If I was a fresh P plater I would, cause I'd be taking on Preludes and V6 Commodores and I wouldn't have been in anything faster, or beaten anything faster for that matter.

- I see!

I'm all about taking down fast Euro these days :P

- LOL! What type of fast Euro's?

Have put a Perrin exhaust on since you last saw it...sweet music to the ears when you rev it out...but now hunting down forced induction kits and then maybe the above will change :D

- Bring it out to the next SAU Meet and give us a listen to the new exhaust.

86 nah don't bother with drags, that car is all corners and a decently quick daily driver. If I was a fresh P plater I would, cause I'd be taking on Preludes and V6 Commodores and I wouldn't have been in anything faster, or beaten anything faster for that matter.

- I see!

I'm all about taking down fast Euro these days :P

- LOL! What type of fast Euro's?

Have put a Perrin exhaust on since you last saw it...sweet music to the ears when you rev it out...but now hunting down forced induction kits and then maybe the above will change :D

- Bring it out to the next SAU Meet and give us a listen to the new exhaust.

M series Beamers, the quicker Benzes, Volkswagens, Audis etc.

I'll see if I find the time!

New p plate law for vic isnt a great change

i know this is the vic section but

lucky for NSW p plates there allowed any car that has a max of 130kws power to weight

so that means s14 s15 audm models, older wrxs and vl turbos now are allowed by NSW p platers them lucky buggers

however the honda s2000 is now banned

comes into effect for them on the 1st of August 2014

Edited by Johnie

 1986 íîâàÿ áàçîâàÿ ìîäåëü çàâîäà ÀÇËÊ - Ìîñêâè÷ 2141 âñòàëà íà êîíâåéåð. Ìîäåëü îòëè÷àëàñü ïåðåäíèì ïðèâîäîì è áûëà ïîëíîñòüþ íîâîé ðàçðàáîòêîé ìîñêîâñêîãî çàâîäà. Òåì íå ìåíåå, ñóùåñòâîâàëè îïðåäåëåííûå ïðîáëåìû ñ äâèãàòåëÿìè äëÿ ýòîé ìîäåëè.  êà÷åñòâå áàçîâîãî, íà ïåðâîå, êàê ïðåäïîëàãàëîñü, âðåìÿ, áûë âûáðàí ìîòîð îò ÂÀÇ 2106. Íà ÀÇËÊ íà÷àëè ðàçðàáîòêó ñîáñòâåííûõ äâèãàòåëåé, êîòîðûå èìåëè âûñîêèé ïîòåíöèàë. Ìîòîðû áûëè ðàçðàáîòàíû, à äëÿ èõ ïðîèçâîäñòâà áûëî çàêóïëåíî îáîðóäîâàíèå è íà÷àòî ñòðîèòåëüñòâî ñïåöèàëüíîãî îòäåëüíîãî öåõà. Ê íà÷àëó 1990 ñòðîèòåëüñòâî áûëî ïðàêòè÷åñêè çàâåðøåíî ðàçíûå èñòî÷íèêè ìàçäà â ðîññèè ãîòîâíîñòü öåõà â 85-95%. Íî â 1990-å, èç-çà ýêîíîìè÷åñêîãî êðèçèñà è íåñïîñîáíîñòè çàâîäà âåðíóòü äîëã â 800 ìèëëèîíîâ äîëëàðîâ çà îáîðóäîâàíèå, ñòðîèòåëüñòâî òàê è íå áûëî çàêîí÷åíî. Öåõ áûë îïå÷àòàí, à îáîðóäîâàíèå âûâåçåíî è óòðà÷åíî.

eiiaaead له. Iiaaeu ioee aeanu iadaaiei ideaiaii دوره تنهد iieiinouth iiaie dacdaaioeie iineianeiai caaiaa. OAI له انه nouanoaiaaee iidaaaeaiiua idiaeaiu aaeaaoaeyie AEY ن فسحة IAE. Â موافق aaciaiai له EA ويآدنيآ، بو idaaiieaaaeinu، adaiy أوه auadai iioid AAC IO 2106. ماتت له له dacdaaioeo nianoaaiiuo aaeaaoaeae AEE، eioidua eiaee aunieee iioaioeae. Iioidu dacdaaioaiu أوه، حسنا AEY idiecaianoaa auei caeoieaii iaidoaiaaiea وسطه انه nodieoaeunoai niaoeaeuiiai ioaaeuiiai سعيدة الهيئة. يا له له AEO 1990 nodieoaeunoai auei idaeoe آن caaadoaii daciua enoi IEEE iacaa لا يزال أكثر Dinneen aioiaiinou سعادته 85-95٪. aneiai A 1990 II، EC-CA yeiiiie له edecena على ianiiniaiinoe caaiaa aadioou 800 هونولولو ieeeeiiia aieeadia iaidoaiaaiea CA، IA auei nodieoaeunoai OAE caeii دوره من AII. يا شمس IIA الجوع، صاحب المتوقع أن iaidoaiaaiea auaacaii AI

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Yes, I know🙄 but the sequential is not in my budget... don't want to reduce power neither, so looks like I'm stuck in the rabbit hole🤣
    • You’ll be very upset when you bust that too not to mention the gearing totally sucks. Don’t do it.
    • Is the panel filter one that is oiled? Have you ever cleaned or touched the AFM?
    • So.... the K&N air box thingo was too big, ended up gifting it to a mate, well, by gifting it he actually supplied food and beer at the pub,  which was nice, as it will not sit on a shelf in the garage for the next 10 years I did trim up some of the existing stuff to neaten it all up and gave it some wrinkle paint, unfortunately it currently has a used and abused mish mash of different types of hose clamps, 4 big fat T bolt type (shit), and a few normal clamps of vairing sizes and brands, but..... only until the 6 constant tension black worm clamps that I ordered from EFI solutions turn up next week Currently the current hose clamps are triggering me hard, LOL Is this the final version, probably not, I really want just 2 silicone pieces, a straight bit of silicone from the filter to the MAF is easy and will happen as soon as I head into Just Jap tomorrow, the problematic part is a 30° silicone bend from the MAF to the TB that I can connect the engine breather from the head, I found that there are bulk head fittings for boat bilge pumps that should work, but until I can get a 30° silicone bend the alloy pipe, and the 11ty thousand hose clamps, are there for the foreseeable future 4 hose clamps are golden, 6 are grudgingly acceptable, the 8 currently holding it all together is just taking the piss    I've also ordered 60 more retaining wall blocks for the front yard, I mis-gonculated the height that was required to get above the base of the Photinia's (red robin's) that are the hedge behind the front fence, currently it is 2 blocks high, and about 1/2 a block short, so going 3 blocks high will be above the base of the red robin's, and allow some room for mulch
×
×
  • Create New...