Jump to content
SAU Community

Sau Vic Tech Night: Discussing E85, Thanks To Wolf Motorsport & Sabbadin Automotive


Recommended Posts

Can someone film the night for us NSW people :)

We are working on getting a video done, providing all goes well will post up once completed after the event.

  • Like 1

Fantastic turn out tonight! Thanks heaps to everyone, especially Robbie from WOLF Motorsport & Rob from Sabbadin automotive :)

  • Like 1

Heaps of great information and things to look out for :)

There were plenty of pics taken, but unfortunately no video of the tech night this time around.

Thanks for the informative evening.

The E85 sensor lesson and how it reads was a eye opener, especially when they turned E85 to E100 by just adding water to the fuel......and the amount of tanks of E85 to run to clean out the 98 and get back to a higher ethanol content.

And the oring lube that turned to jelly and blocked the injectors leading to engine failure.

Certainly made me rethink the route im taking to fuel setup.

Edited by GTRPSI

Oring lube? What sort of dropkick uses petroleum jelly to fit injectors? A tiny bit of silicone spray is enough and won't ruin anything.

Sounds like it was an ethanol bashing night. Wish I had been there now to dispel the rumours.

Sounds like it was an ethanol bashing night. Wish I had been there now to dispel the rumours.

lol. not many benefits were mentioned that aren't commonly known, but it was good to know whats involved for piece of mind.

to summarise, you could say the evening focused on:

- things to do or at least keep in mind when converting

- things to keep in mind when running (and buying E85)

- things to do to maintain your car when running E85

Oring lube? What sort of dropkick uses petroleum jelly to fit injectors? A tiny bit of silicone spray is enough and won't ruin anything.

Sounds like it was an ethanol bashing night. Wish I had been there now to dispel the rumours.

Just mentioning what they had seen, customers fitting orings like that without issues in the past because 98 disolved it but E85 reacted differently leading to engine failure.

I was surprised i didnt see your face there scotty, spewing your wernt there for some myth busting. :)

And what about the petrol you buy, do you worry about that?

yeah.

thats why i use 98 from one chain of petrol stations.

im glad E85 is regulated (from Nov 2012) but when United are only supposed to tell you the ethanol content, i was surprised that United wont tell you the RON rating. and when the ethanol content is down to 70% during winter months, I wonder what the RON would be then? for safety you would want a flex fuel meter guiding the ECU to make sure the mixtures are consistent with the fuel (at least i would anyway)

im not bagging the fuel, just playing devils advocate because its not for everyones budget or application.

Guest
This topic is now closed to further replies.



  • Latest Posts

    • The final part arrived today to un-clampify and simplify the intake Who would have though a 1/2" hose stainless bulkhead fitting designed for below waterline bilge pumps would be what I needed Test fit on a 3" offcut I had laying around to see if it would work, and it worked a treat All going well the intake will be on its "final version" tomorrow 
    • Good luck on the weekend mate
    • Must have been an absolute nightmare to drive when the power steer was out, the rack ratio/wheel size/caster is all set up for power assistance
    • Welcome to SAU, what are you looking at buying?
    • I checked the injectors again (1 and 2, since they’re easiest to access) to make sure they weren’t clogged. Even though the entire fuel system had been cleaned, I wanted to be certain. Everything looked clean, so I reinstalled and connected everything. When I started the car to confirm everything was okay, it immediately revved up high, so I shut it off straight away. I checked to see if I’d missed a vacuum hose or something, but everything was connected. On the second attempt, the car ran without the high idle, but I noticed a distinct “compressed air” sound coming from the engine bay. Tracing the sound, I pushed injector #6 forward slightly and the noise stopped — it turned out it wasn’t seated properly, despite the fuel rail being bolted down. While holding it in place, the car idled steadily without stalling and ran for over 5 minutes. At this point, I pulled all six injectors out just in case I hadn’t seated them correctly or dirt had gotten onto the O-rings. Unfortunately, I discovered that I had damaged 3 out of 6 injectors (the OEM 270cc ones) during installation. So yes, this was my fault. Since only the pintle caps were damaged, I’ve ordered a Fuel Injector Service Kit from NZEFI to refurbish them. In the meantime, I reinstalled my new injectors – the car now idles fine for over 15 minutes without stalling. I have not attempted to drive it so far. It’s not perfect yet, as it hesitates when the throttle is pressed, but it’s a big improvement. Unplugging the IACV with the new injectors idles at around 800rpm, even with the IACV screw tightened fully. But this is probably due to tune.
×
×
  • Create New...