Jump to content
SAU Community

Recommended Posts

Just as the title says, I'm about to do a thermo fan conversion on my R33 as my fan it about to break.

I want to avoid using those adjustable temp switches.

What temperature range should I aim for with the temperature switch?

It's an rb25det running at 12psi.

Also, where would the best place be for the position of the switch?

Cheers.

Thanks guys.

It's there a way to stop the clutch fans from breaking every 6 months or so?

My mate put a new one in his car and it's already got 2 large cracks in it after a little over a month.

Maybe another brand?

I admit that both mine and his cars get thrashed, but that's pretty much what we own them for...

I would say possibly engine mounts crapped causing the engine to move and the fan is hitting.

That or its getting to hot.

If you buy a geniune one it will last another 15 years or so.

Second hand....thats a gamble really.

Dont by gtech......

I don't think it's hitting, mine has 2 cracks between every blade, I'm just getting in early.

My mates actually flew apart while he was drifting, made a complete mess of everything.

His new one already has 2 large cracks but I don't know if it's genuine or not.

Stay away from gtech, check.

While I agree/understand the advantages and disadvantages of thermo fans a lot of drifters do use them, myself included. I have never seen a stock fan break but I don't like the idea of using a stock one with cracks and continuously revving it over 5000rpm. I know that I could buy another but I just like the advantage of thermo fans, it really comes into it's own when you have a nice setup with twin fans and a cross flow radiator.

With drifting (depending on the track) you can sit in a staging area for maybe 2-3 minutes at a time. After flogging the shit out of your car the twin fans really cool it down well. Not saying a stock fan couldn't but thermo fans DO work. I have only ever seen ONE(!) Drift car with a JZ engine running a stock fan, and I'd say over 50% of RB's run thermo fans as well.

These are just my experiences so take it with a grain of salt, but for people who say they don't work/are crap etc then they are incorrect

Never said they dont work, you need to go high end fans/brand to get the most out of them
Then u need to take in to account the power draw.
And if it actually is going to hinder airflow at higher speeds ( ie bad shroud)

He should be getting a bigger 40+ mm radiator instead if he hasnt already.
I track my car with stock fan and 50mm radiator and idles fine after a good heavy 4-5 laps

Edited by jay-rod

I gave up on the thermo I ran in my GTS4 (admittedly without any shroud). Could not keep the engine cool - the slightest incline (at highway speed) caused the thermo to switch on. After I put the standard fan back on, have had absolutely no problem with temperature control.

Figured the couple of kW I gain running the thermo wasn't worth the cost of an engine rebuild.

Jared, I don't think you understand how a thermo fan is designed to work. You will gain a few kW if you set the thermo up the way it was intended, ie to only be working when the engine temperature gets too high.

Alternator only works harder if the thermo fan is on. The majority of the time the thermo isn't on. Only comes on when the engine temp reaches a pre-set thermostatted temperature. Therefore I gain a couple of kW because the engine doesn't need to drive the clutch style (factory) fan.

Which is exactly how the viscous hub works. It only locks up when the viscous fluid is hot. Once locked and after the airflow across the hub has cooled the fluid, it disengages and freewheels again. The effect of the 'drag' on the motor, when the hub is freewheeling, would be negligible at best

  • Like 1

If your changing to thermo fans to gain horsepower, your a long way from being on the right track

If your stock setup works then leave it alone. If you are doing a thermo fan conversion for a practical reason then go for that. I really don't understand people who go on about the horsepower gains from running thermo fans.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I'm normally copping my own abuse from neglecting my daily drivers. "Those suspension bushes will last a bit more", "Don't worry about the oil leak, just keep topping it up". The project cars I'm always doing things slowly on them as I'm wanting them to be done better, and neater, and nicer. Luckily I don't have to deal with 18 year old Matt's "Learning to wire" stuff in the project cars. And there's only one piece of wiring I'm displeased about in the Landcruiser, and it's about to be cut out... However, the box loads of parts that have been going through this place lately for the Landcruiser... Brake pads Brake Rotors Full handbrake overhaul Wheel Bearings Seals Swivel hubs Steering Boxes Half the suspension joints Shocks Air bags (Ones to go in the rear springs for towing) Water pump Timing kit Lower timing case Harmonic Balancer Radiator Lots of other little seals and shits Gas struts for the bonnet New power window switches And god knows what else I've forgotten... Ha ha ha I have my fingers crossed the pinion seals don't start leaking on the diffs, that the transfer case doesn't leak, and the gearbox input shaft doesn't leak, nor the rear main seal. As they're about the only seals I haven't replaced in the driveline! I'm seriously eyeing off buying new caliper rebuild kits front and rear brake calipers... I'll probably recheck all the valve clearances soon too, and hopefully, it should be all good and sweet to haul some long distance trips again!
    • Every time I pull my 3x gauges out of the console and see the crack-addict way that I did the wiring, and I just can't bring myself to tear it all apart and "make it nice", because it is currently working. In fact, the last time I was in there I probably made it worse.
    • The best part is when you own the car long enough that you look back and find your OWN ham fisted amateur shit!
    • The annoying part about neglect, is when you start to replace one thing, and find ten more broken things. Ham fisted monkey repairs you normally only find out about when trying to do something unrelated! Ha ha   Neglect you can kind of anticipate the huge costs to fix it all. Ham fistedness is normally a shock the first time your work on a new old car, as everything "looked" good before.
    • For DBA, check out their guide table here. https://dba.com.au/wp-content/uploads/2023/01/Direct_Replacement-Guide-2021.2.pdf   Additionally they have some other guides and info on how to make sure you choose the right pad.
×
×
  • Create New...