Jump to content
SAU Community

Ecu Selection For Rb20

ali-stain

By ali-stain,
in Engines & Forced Induction

 Share

Recommended Posts

ali-stain Rookie

ali-stain

Posted
Posted

Im currently upgrading my 32 GT-ST with a high mount, ffp and the rest, and was intending to install a power fc D-Jetro.. However I've recently found they aren't made for rb20, I'm not a ecu expert at all, but I hear you can use an RB25 or an RB26 pfc with some rewiring however it defeats the purpose of plug and play, map and O2 sensor etc. what is the best way to go about the issue? Are there any other known brands of ecu within a decent price range for the rb20 which will allow map, O2 sensor, and plug and play?

Any help is appreciated, thanks guys.

Link to comment
https://www.sau.com.au/forums/topic/445614-ecu-selection-for-rb20/
Share on other sites
XRATED Veteran

XRATED

Posted
Posted

I was going to say the same as all the above monkeys. Notwithstanding the requirement to run a MAP sensor.

I would ignore the requirement to run MAP and just go Nistune + big enough AFM.

.....who you calling a monkey?

... all though we do like bannanas! ha ha!!

Roy Grand Master

Roy

Posted
Posted

Keep it simple. Power Fc. Easy to tune by just about any tuner. No messing around with std ECU. 10mins to install and start tuning.

Nistune is a good backup option if you cant find a PowerFc but I would be grabbing one of these http://www.skylinesaustralia.com/forums/topic/444035-for-sale-r32-gts-t-power-fc-ecu/

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • QB6SAGR
      Tein Circuit Master- rebuild worth it?

      By QB6SAGR · Posted

      Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
    • funkymonkey
      Howdy Y'all

      By funkymonkey · Posted

      Nice car! I’m glad folks in the US have gotten past the FnF and are buying real cool cars like the 260RS I was with a bunch of mates in Portland about a year ago and spotted a green Stagea (just a regular 2.5T AWD) parked about 2 blocks away and they were like “a what?” So I made a bet with them for a round of beers and said “ok one of you run down there and tell me if the steering wheel is on the correct side” 5 mins later the American comes trudging back up the hill and goes “he’s right guys. Ok what beer do you want?”
    • Dose Pipe Sutututu
      Starting again

      By Dose Pipe Sutututu · Posted

      Should replace OR drop the tank, give it's good clean. Might be worth replacing that entire fuel level/pump/cradle thing with this: https://frenchysperformancegarage.com/products/fpg-s13-180sx-r32gtst-single-pump-hanger-kit-billet-hat-6-v3-fpg-089?gQT=2  
    • R33_Guy
      Speed Sensor replacement

      By R33_Guy · Posted

      Thank you so much for the help
    • GTSBoy
      Speed Sensor replacement

      By GTSBoy · Posted

      Yes it is ATF. I quote @Duncan "it takes a good synthentic auto trans fluid like Castrol Transmax Z" It's not a diff. It's a transfer case. Totally different thing. Yes, fluid will come out the sender hole. No you do not really need to drain it. Just pull the old, quickly poke the new, clean up and top up. But realistically, you should probably take the opportunity to change it anyway.
×
×
  • Create New...