Jump to content
SAU Community

Just Went For A Spin In A Tesla Model S

PranK

By PranK,
in General Automotive Discussion

 Share

Recommended Posts

PranK Grand Master

PranK

Posted
Posted

So, going into The Star today and noticed what initially looked like a new Jag - the front and back were obscured by posts, so don't get upset at that mistake! :)

A new Tesla Model S!

Amazing looking car, had some serious presence just sitting out the front. After a minute or two a young bloke comes over to chat to me about it, he was the Tesla rep.

It is one of 4 in the country and they are doing test drives out of The Star at the moment because they dont have a Sydney office. He asked if we wanted to go for a spin around the block.

He didn't have to ask twice.

Two things grabbed my attention when I got in, the first was the massive screen in the middle. I'm writing this on a 22" monitor and if it was flipped on its side I reckon it'd be similar in size. All controls in the car are performed through this screen and it has user profiles to set the car up just the way you like it (screen display, climate control, seat position etc.)

The second thing was that this felt very much like a German car. The doors 'thud' when they close, the interior finish was impeccable, the leather was gorgeous - I had expected something of a luxury Jeep kind of interior and I was very pleasantly surprised.

Silence! Absolute silence! Seriously eery to have such little noise - especially from a car with some serious poke.

As with any decent rep, he gave it a bit of a squirt and jeezuzz .. I didn't know what to say! 0-100 in 4-point-something seconds he said, but it felt so much quicker because of the immense torque! 310kw and 600+ nm of torque! And the bloody thing still isn't making any noise!

Anyway, some pics from me and my mates phones. Bummed I didn't have a proper camera.

gallery_3_5684_300081.jpg

gallery_3_5684_319153.jpg

gallery_3_5684_1170777.jpg

gallery_3_5684_381021.jpg

gallery_3_5684_457074.jpg

$185k as it sits but he said the base model will start from $100k which I reckon is pretty good.

  • Like 1
nick_7g Proficient

nick_7g

Posted
Posted

I drove the Model S at the star and it was damn quick. We were cruising along the Anzac bridge and the rep said to tap it to the floor quickly, which I was all too happy doing. The faster you put your foot down the faster it picks up.

The max torque at all speeds made for an incredible rolling pickup of speed. It would have to rival most cars in the same price range for response.

Besides the instant torque, it also doesn't need to shift down a gear or 3 in order to maximize acceleration.

I agree with the impression of finishes and inclusions. Was very roomy, with 2 boots, a panoramic roof and a great steering wheel.

You can cover the whole interior in alcanatra and carbon which would look awesome.

I'm actually going to drive it again with a relative tomorrow.

For the equivalent E or 5 I think you're getting something way cooler, faster and more unique in the Model S.

Tesla have also priced the car equivalent to the US price adjusting for shipping, FX and local taxes and that's it. None of the gigantic marking up conducted by most other manufacturers.

  • Like 1
PranK Grand Master

PranK

Posted
  • Author
Posted

For the equivalent E or 5 I think you're getting something way cooler, faster and more unique in the Model S

Agreed.

Although, that being said I am still not convinced that electric is the way to go (I'm much more interested in fuel cells - hydrogen) and I have no idea what the reliability is going to be like.

GTR-N1 Grand Master

GTR-N1

Posted
Posted

I wonder from a 'wise' dollar investment point of view, what the depreciation will be like on this?

Might other manufacturers come out with a competitive "undercut" which then termites the Tesla S's value?

nick_7g Proficient

nick_7g

Posted
Posted

Depreciation rates in the US have been similar to the comparable euro cars, which isn't great.

In Australia, Tesla will be such a low volume manufacturer that I doubt the competition here would give themselves a haircut when they're probably booking a 30-50% premium to "fair value" currently.

It's just scary how much luxury car tax adds to the whole equation. It's about ~$20k on a $180k car. Scam!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • MBS206
      M35 Aftermarket Fuel Pump

      By MBS206 · Posted

      Pressure when IDLING, is meant to be 51PSi... So that amperage value needs to go up a fair chunk... I'd personally be factoring for more like 12amp at least on those runs, and at that point you need to hope the already there wiring doesn't drop you a volt or two, as that's a lot of fuel pressure flow drop off from 13.5 to 12V! Taking idle pressure of 51psi, means the pump will be drawing a MINIMUM of 9amps all the time based on your reading of the graph (3bar base, then allowing an extra 0.5bar for boost = roughly 51psi)
    • Ben_D
      Wanted to buy R200 longnose LSD 3.9 ratio

      By Ben_D · Posted

      Hi all,  I am in the market for an R200 longnose diff out of a Z31 300ZX, or S12 RSX, DR30 skyline, or similar, in a 3.9 ratio.  Preferably a late model one with the M12 crownwheel bolts.  The only easy to find advert for one of these was my ad back in 2007 when I sold it on this forum.  I sold the diff as I had sold the car it goes to, but as it turns out, after 18 years I got the car back late last year, so now I'm looking for the diff !  If anyone knows where to find a longnose R200 LSD with the M12 crownwheel bolts, drop me a line at [email protected] - Bonus paid if soomeone comes up with the original diff (stranger things have happened !).  Cheers   Ben D    
    • Ben_D
      Back for more after 18 years - and where are the longnose R200 LSDs?

      By Ben_D · Posted

      Hi everyone, I used to post here a bit from 2004-2013, when I owned various Nissans, in particular my S12 RSX gazelle, which was sold in 2007.  As luck would have it, after an 18 year hiatus, the car found its way back to me last year, and over the past 11 months I have had the pleasure of restoring it with my kids.  One thing that I am after in particular is a 3.9 ratio R200 LSD for it.  I actually sold the one out of the car here back in 2007 , and it would be incredible if I could track down who I sold it to, so I can see how they have progressed over the years (and to be honest, to see whether I can get the diff back !).  Anyways, hi all and let me know "where are the R200 Longnose diffs all at these days ?  Cheers Ben D  
    • sonicii
      G35 Control arm and Compression Rods into a V35 Skyline.

      By sonicii · Posted

      Arms will be the same as the G35 or 350Z, but as above, there was a change in the lower control arm where it connects to the ball joint.  That said, you can remove the ball joint cone from your old ball joints and fit them to the new ball joints.  To be honest, I didn't think the ball joints themselves were different. The main ball joint is a bit awkward to replace, you really need to remove the steering knuckle to press out the old one.  Some people have used tools to remove it in place, but it just seemed too hard to get to. If you are going to press out/in that ball joint, then you may as well just replace the bushings in the LCA and the compression rod.  You can buy the compression rod bushing from Nissan, but the LCA bushes, you will need to go aftermarket. Much cheaper than buying the whole arm.
    • Erelyes
      Ceramic turbine damage to engine - what did yours do?

      By Erelyes · Posted

      Ha, well, it's been.... a bit of a journey. Things have taken much longer than I'd hoped. I'll probably put up a thread at some stage. Hopefully soon. The car's not done any kms since my update in June though, put it that way.
×
×
  • Create New...