Jump to content
SAU Community

Possibly Going Back To Shock And Spring Combo

dyl33
 Share

Recommended Posts

dyl33 Mentor

dyl33

Posted
Posted (edited)

Hello,

so I've had BLITZ/BC coilovers for bit over a year not really liking the ride comfort on the street, it's not that bad on good roads but the roads I'm on are shit house and feel a coilover doesn't have the suspension travel that is needed for a street setup plus the springs are a little to hard and I'm Bit of a wuss and don't see the race track a lot.

So I am looking at going back to a shock and spring set up, I know bilstein set up is awesome but when said and done it's $1500+.

Is there any decent shock and spring setup for <$1100ish not looking to go retarded low just a nice legal setup for street driving with the odd drag/ track day?

Also has anyone heard of KYB special for street shocks would these be bad for Australian roads?

Thanks

Edited by dyl33
mistermeena Enthusiast

mistermeena

Posted
Posted

I use kyb standard shocks and king spring lows. Bit of shopping around got me the lot for under 800.

Sure I'd like it a bit lower but meh. I'm super happy for the price. Stiff but comfy enough on the street, and I ran the car at the track last weekend and loved it - bit of body roll but not as bad as I was expecting.

dyl33 Mentor

dyl33

Posted
  • Author
Posted

I use kyb standard shocks and king spring lows. Bit of shopping around got me the lot for under 800.

Sure I'd like it a bit lower but meh. I'm super happy for the price. Stiff but comfy enough on the street, and I ran the car at the track last weekend and loved it - bit of body roll but not as bad as I was expecting.

800$ good but I'm not really going for standard shocks unless I can't find anything else.

Yep most coilovers suck massively. Stock is shockingly soft though. I'd suggest the KYB and king springs or similar option

What KYB's would you suggest? What are other similar options?

The special streets? Ive only heard of them recently not a lot of info about them.

dyl33 Mentor

dyl33

Posted
  • Author
Posted

Yeah I've read that SK thread, definitely want monotube shocks but what options do I have with shocks? Can't find to much on the net don't really want to go to the local suspension mob.

What do you think would be a suitable shock and spring combo gtsboy? ( didn't want to pest you with anymore suspension PM's lol)

GTSBoy Grand Master

GTSBoy

Posted
Posted

Well, I don't think KYB make any monos......so that kind of counts them out. I had KYBs in the rear of mine, put on at a similar time (10+ years ago) as when I put some Bilstein B6s in the front. Only put KYBs on because couldn't get the right Bilsteins at that moment and desperately needed to replace the original dampers. Was never really happy with the KYBs.

Anyway, fast forward to a couple of years ago and the KYBs start leaking and aren't working well. Fast forward to a few months ago when I put a full set of SK Bilstein B6s in, and the old front B6s are still in perfect workable condition and the KYBs are rooted.

So, for my money, it is Bilsteins. Preferably modded by SK. ~$1300 for a set of 4 customs with new bump stops. ~$400 for a set of Kings springs. Seems a lot of money, but it is soooo worth it.

dyl33 Mentor

dyl33

Posted
  • Author
Posted (edited)

I knew you were going to come at me with your bilsteins lol. I thought they were more but it's still $600 more then I'm wanting to spend.

But if I can't get monotubes then I'll have to get twin tube something's

Edited by dyl33
Grimesy Collaborator

Grimesy

Posted
Posted

Just try and get bilsteins even if they are not the SK kit ones.
I got regular bilsteins from GSL Rallysport. They might have decent or possibly cheaper prices than the SK kit. I seem to recall i got mine for $1300 with kings(a few years ago now).

Kinkstaah Grand Master

Kinkstaah

Posted
Posted

I have the SK ones and man, I don't think I'd do anything else. I went for the bees knees, and spent 4k+ and immediately after putting them on, realised they're the best upgrade for the car you can get. Way better than any engine mod for driving pleasure :P

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • The Bogan
      NC MX5

      By The Bogan · Posted

      Decided to upgrade my pressurised plastic coolant expansion tank for a fancy pants alloy version The OEM versions can get brittle, even the new plastic one I got when I first got the car is a starting to show signs of "stress" I wasn't cheap, but it is basically unbreakable
    • pacman_1219
      RB25DET Neo Rebuild

      By pacman_1219 · Posted

      Morning all, I have an RB25DET Neo that's in need of a rebuild. Will need new pistons etc due to detonation damage. Would anyone be able to recommend a shop in Southeast Queensland who I could bring my long motor to for a rebuild? Just want someone who knows RBs and whos built a bunch of them before. TLDR - recommended engine shops for RB rebuild.
    • Yeetus
      R33 GTST Sh*tbox to Polished T*rd

      By Yeetus · Posted

      Gday Thought it was about time I started a build thread! As expected this project has snowballed into a huge financial liability, but unless you’re strong willed and responsible, it’s not a surprise. Background -  My first turbo car was an R32 GTS-4, got my full license and then totalled my Au Falcon a week later, so while trying to sell my RMZ450 dirtbike to buy another car a bloke offered to swap the R32 which at the time I felt like I was ripped off but looking back and seeing prices of those now ($40kish) it was a good deal, I didn’t know enough about these cars to appreciate what I had so sold it before the RB20 blew up. Between here and there, out of 12 cars I’ve owned the note worthy ones are a V8 Lexus SC400 (soarer), a couple of XR6 Turbos and my beloved S15 which I had for about 3 years, picked it up for $12500, repairable write off but she was fine, gun metal grey/pewter and bone stock/unmolested until I got my hands on it. Ended up spending about the value of the car and 280kw, 2 demerit points by the time I got defected and sold it for $14500 (also $40kish in today’s market, rip) Fast forward to the present day, I’m in a much better position financially and daily an MQ Triton (great cars, pipe down Ranger Bois), I cruised marketplace and car sales for a few months looking for another R32, the best deal I could find was an absolute rust bucket half finished project for $12000, until this R33 popped up in Port Macquarie for $18k - unregistered and barely running but decent shape, kept an eye on it for a few weeks and the price steadily dropped, $16k then $15k then $14k, that was the point where I was like shit someone’s gonna snatch this up! It was owned by a young bloke who had big plans but him and his missus just had a baby so smartest move financially for them but big gain for me. So 2 days later I’m towing a car trailer to pick this thing up. Roughly 2 weeks and $3500 later I’m cruising around Newcastle in my beat up R33 all smiles and dose noises! It only needed some basic shit to get it going, coil packs and air flow meter, electrical stuff and all fluids changed, 158k kms and running pretty good, nice smooth engine after oil and coolant flush - when I say coolant I mean it had been filled up with tap water, every gallery and heater element was filled with rust, 8-9 flushes later and still had brown liquid coming out but she’ll be right. The car was painted R34 Bayside Blue at some point but whether it was a cheap job or just not looked after is anyone’s guess, clear coat flaking like sausage roll.  Was rethinking my choices and contemplating life, had it up for sale for $22k - still cheaper than any registered R33 but got little interest, next minute I had an opportunity at work - 6 months overseas for good money, so that was a no brainer, fast forward again and here we are with a 50% finished project. Current Mods - 200ish KW according to butt dyno Was tuned with Apexi PowerFC EBC (old school Greddy Profec)  Stock turbo (more shaft play than a Tinder date gone right) 3inch turbo back Varex muffler  Aftermarket injectors of mystery size, Power FC showed 36% duty cycle at full boost so not behd good size Someone had good intentions but stuck with the stock R33 MAF so we had misfires at 6000rpm due to the MAF hitting 5.2V So far I’ve redone the entire interior with carpet form Car Mats Direct, new Seats and steering wheel from Autotechnica, also sound system by Autobarn (mainly Kicker) Also MCA pro comfort coil overs - Hands down best purchase yet, worlds of improvement over the tired 30yrold shocks Goals - 450kw/600hp on flex tune New paint job - Midnight Purple 2 Engine is at the shop getting rebuilt with forged rods a pistons, new valves and springs, ATI Harmonic balancer, Aeroflow 7.5L sump, rear head drain and oil restrictors as per oil control thread* and cam covers modded for larger breathers, other stuff I can’t recall of the top of my head Parts purchased and to be installed once the engine is done -  Engine loom from Wiring Specialties including these options: Haltech Nexus S3 R35 Coil pack conversion  PRP Dual Trigger kit Fan controller  Other Parts -  262 Kelford Cams Turbo - Hypergear ATR43SS3-ProS with T51R mod (whistly boi) 6 boost manifold (high mount) 50mm Turbosmart Pro gate (plumbed back for legal reasons) HKS Super Turbo Exhaust with High Flow Cat Custom 3.5inch dump and front pipe 1500cc Bosch injectors  Fuel Pump walbro 525 Haltech MAP and IAT sensors Haltech Flex Sensor Fenix Radiator with dual thermo fans LS1 Alternator Kit Oil Filter Relocation from EFI solutions and Cooling pro oil cooler Many other things sitting in my garage waiting for that engine to come back. Progress pics to follow -  
    • GTSBoy
      Dose's Sometimes DIY and Pay Someone Home & Boat Improvement Thread

      By GTSBoy · Posted

      Losses have to be less with DC coupling. Provided the battery inverter has decent MPP tracking ability - which really shouldn't be a problem. It's not 2005 any more.
    • ossy
      Will R33 GTR rear backing plates fit GTST?

      By ossy · Posted

      Hi, Will the R33 GTR rear brake backing plates fit a GTST? I'm struggling to find GTST ones but can find new GTR ones.   Thanks.
×
×
  • Create New...