Jump to content
SAU Community

R34 Gtt- Load Hesitation

agags333

By agags333,
in Forced Induction Performance

 Share

Recommended Posts

agags333 Collaborator

agags333

Posted
Posted

Hey Guys

ive noticed misfiring and or hesitation from my car when planting the accelerator.

this occurs on high RPM range - 4.5 onwards when in low gear, and also occurs on LOW RPM when im on freeway win 5th gear and decide to plant the pedal.

Any ideas?

The car basically "struggles" as if not all pistons are firing.

Link to comment
Share on other sites
Blackkers Experienced

Blackkers

Posted
Posted

This could be one or two of many things. What is your set up?

How much boost? What turbo and what Ecu? Spark plug gaps? Coilpacks?

If you haven't done it in a while just fit a new set of NGK copper plugs

Link to comment
Share on other sites
agags333 Collaborator

agags333

Posted
  • Author
Posted

everything , except for an HKS POD filter, is stock.

i have recently services the car with BCPR6ES 11s thinking the 8s i had in there could have been the problem.

to no avail.

I can try changing the coilpacks i suppose.

but from what ive read, looks like timing, maybe if i adjust CAS?

Link to comment
Share on other sites
  • 4 weeks later...
Kinks Grand Master

Kinks

Posted
Posted

If it's a bit rough and stuttery, coil packs for sure. Also, if you coil packs are worn then gapping the plugs down to 0.8 will help. There should be no driveability issues with 0.8 gap, everyone does it. Ultimately you're just delaying buying new coil packs though.

HKS pod could be releasing oil onto your airflow meter. get some electronic cleaning solvent (NOT PCB cleaner, just cleaning solvent that says it dries without residue) and hit your airflow meter with it. the hot wire inside the airflow.

if it's smooth (like the car just feel gutless) it could be rich and retard. my car seems to drop timing in the midrange, stock ECU stock everything. go figure. just has a big hole. I'm replacing the ECU at some point so will see if it takes more timing on the dyno.

Link to comment
Share on other sites
nicksamaniac Collaborator

nicksamaniac

Posted
Posted

The bcpr6es 11s you got, the 11 is the gap set out of the box- 1.1mm, you can try closing it to 0.8mm as kinks said.

Everybody does it and seems to work for everyone.

Science tells us that gas is harder to ionize at pressure, hence closing the gap helps.

Link to comment
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • Rezz
      Japan Scrapbook

      By Rezz · Posted

      G.G.C. (Gibier German Cook) restaurant in Motomachi in Kobe: A tiny 2 floor restaurant that was founded in 1976. The original couple who owned/ran it retired and sold the business to a corporation who pretty much tried to keep it the same as it was.  Lots of lesser known (to me anyway) German beers available.  Venison with vegetables. The meat came from deer from Hokkaido. The chef told us that there's a whole industry around the use of all parts of the deer from the antlers to the hooves. Sure enough, directly accross the street from this restaurant is a shop that sells all manner of utensils, clothes and objet d'art all made from deer skin, bones and horns.... also owned by the same corporation. The venison was super tender 😋 Various decorations, a lot of which were quite old, no doubt from the original owners. A nice pilsner too which I'd never seen before.  It's well worth a visit but check the opening hours, they're closed on Wednesdays, only open 11:30am - 3pm on Mondays and Tuedays, 11:30am-3pm for lunch and 5pm-11:30pm on Thursdays, Fridays and Saturdays, and 11:30am-3pm and 5pm-9pm on Sundays. Last order is 30mins before close.
    • Rezz
      Japan Scrapbook

      By Rezz · Posted

      Yep around 2m long or thereabouts.  I made another post in the photo diaries 17 years later lol. I swear it has not been that long!
    • acsplit
      SAU Motorkhana Saturday 18th May Avalon including entry list.

      By acsplit · Posted

      Full results via link below https://docs.google.com/spreadsheets/d/1inu1mRRO0WjV2-3vGYsjnmYggVOzmApWOby68GwPGcI/edit?usp=sharing  
    • BK
      Another BK R32 GTR money pit...

      By BK · Posted

      Have I not posted since 2022 ? wow... Yes, it's pretty much finished mechanically. I'll probably sell it soon as the old man is 80 in November, so 99% he won't ever drive it again. I don't really need 3 GT-R's and I haven't driven any of them since September last year - correction, drove my 33 earlier this year on Australia day. All of them have been like this since then.
    • The Bogan
      MLR's Bogan cruise ship

      By The Bogan · Posted

      So, after talking to Tyson at Auto Tech Engineering about my "cunning plan", he suggested to "not piss money away on stuff that the car probably doesn't need" (the max IAT at the end of the 1/4 ever only seen around 30°C, which is in no way a issue, and as such, for what I use the car for I really don't need colder IAT anyway The whole point of the "upgrades" that I thought about doing was that my IAT started creeping up from 25°C to 30°C when cruising, then drop back down, then raise back up, rinsing and repeating, it has never done that before, so after talking to FI interchillers they assumed that it was the Bosch pump starting to fail, and if I was going to replace the pump....... I would do my usual thing of "while where in there" But, Tyson said he has seen similar things happen to IAT with failing or leaking AC compressors on other cars with interchillers, and as the AC compressor is 22 years old it is probably well on the way out anyway, and if a electric water pump fails it stays failed and doesn't just speed up and slow dow, but if a AC compressor starts to fail or is leaking, it will fluctuate and give a typical result to the IAT He said he could test the compressor and see how it is functioning and pressure test the whole system, but, as I do, I've just got them to order a new compressor to install to start with, and do a AC service and see if that fixes the issue That way, if it is the compressor, I wouldn't be spending lots of coin on something that wasn't the issue, and not actually needed, as the stage 2 kit, and pump, comes in at around $2k in parts alone, not including the plumbing and other parts that will be required or labour  And apparently the Bosch pump I have is really reliable and well up to task for the flow/pressure requirements that I need to keep my intercooler and massive amounts of boost heat (7 psi LOL) under control giving a nice and cold IAT A big shout out to Tyson for this, not many people will talk a idiot out of wasting money on car modifications, and the saved car budget funding can be wasted elsewhere on things that I may, or may not, need, like a nice new leather SS interior with red stitching......maybe I can convince the Minister for War and Finances into a nice trip down to Victoria for a week away to see the sights (I'll explain that I will need a hire car once we're down there so we don't have to worry about the Commodore being parked up on the streets at night, and it just so happens there's a joint that I can store it during that time) $1680 for all of the interior trims, + installation cost (I'll ask for a quote to install the trim if the new compressor fixes the issue)   https://leatherseats.com.au/products/leather-seats-trim-skins-kit-to-fit-vt-vx-vy-ser1-ss-green-black-diy-install  
×
×
  • Create New...