Jump to content
SAU Community

Recommended Posts

spanner? you need a 1/4" socket set.. spanner will hit the fan and/or the ancillaries belts I think.. never tried loosening the CAS bolts with a spanner, curious now if it fits lol.. always have used a socket

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/3/#findComment-7366069
Share on other sites

All done and didnt break the circlip. Im not a mechanics butthole but all went well and pretty straight forward. Ended up with 11-12lb boost heaps better to drive.

Next job is the new heater core i picked up. Not looking forward to that.

Then in 2 weeks going in for a tune. once i pick up the z32 ecu.

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/3/#findComment-7372687
Share on other sites

  • 1 month later...

Ok bit of progress and wondering where to go next. Got the ecu and nisstune and tuned and what a difference got 207 kw at the wheels which i thought was pretty good off a stock turbo, motor, injectors and fuel pump. Now what next to do. Im thinking afm, injectors and fuel pump. No idea on what type yet some research will have to happen

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/3/#findComment-7398688
Share on other sites

to be honest mate, you can't go much further without spending heaps and losing response anyway.

But if you want more power and I assume you do, next job would be new turbo. The stock turbo will die an early death if you push it any harder

supporting mods include but are not limited to:

-fuel pump Walbro GSS341/342 for petrol or F90000267 for E85

-Z32 AFM

-Injectors (if you want more than ~245rwkw on petrol or if you want E85 at all)

-coilpacks/clutch if need be.

Don't forget to run a direct battery feed for a new fuel pump regardless of which model you use.

Good luck

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/3/#findComment-7398705
Share on other sites

would i be able to reach 250kw with the stock turbo.

Absolutely not. Maybe on E85 you could get close, but it will be a bad thing to do. Turbo maxes out at less than this in terms of air flow, and when you push it that hard you are risking it flying to pieces (fragile ceramic turbine remember!!!!!!!!)

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/3/#findComment-7398746
Share on other sites

Absolutely not. Maybe on E85 you could get close, but it will be a bad thing to do. Turbo maxes out at less than this in terms of air flow, and when you push it that hard you are risking it flying to pieces (fragile ceramic turbine remember!!!!!!!!)

Cheers mate will probably go high flow turbo so boost comes on early unless there is an after market turbo that can do this and handle high teens off boost. Will get the fuel pump probably this week if i have time and then in a few months the rest and possible turbo

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/3/#findComment-7398759
Share on other sites

Look at http://www.sau.com.au/forums/topic/448435-factory-response-aftermarket-turbo-rb25/?view=findpost&p=7394103 to see what an HG highflow can do for you even with stock injectors. The ability to wind the boost up to values that will destroy the stocker is not to be scoffed at.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/3/#findComment-7398771
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Nah, don't bother doing any actual measurements on the car. Just go ask the inter-f**king-net.
    • I currently have 18 x 9 +30 on the front with 18 x 10.5 +38 on the rear. Absolutely regretted it. Ended up putting 15 mm spacers on front and 25 mm spacers on the rear. Not to mention the rears were like a mm from hitting the coilovers. Definitely would go more aggressive then what you were originally planning. Keep in mind my guards are rolled and cars fair low so you might possibly need to roll guards depending how aggressive you go and how low the car is. Im not an expert but the 18 x 8.5 +25 18x9.5 +30 Sounds like it would sit much better.
    • Hey guys, sorry i have been researching for a few months and absolutely cannot wrap my head around this. I am about to order some rims to fit my R34 Gtt with coilovers My original plan was to order Rota grid R in 18x8.5 +30 235 40 R18 Fronts 18x9.5 +35 255 35 r18 rears But then the thought in my head said this isnt aggressive enough. I want the most concave spokes i can get without too much of poke and scrubbing   So my thoughts now is  18x8.5 +25 18x9.5 +30   My question is will this be the most aggressive i could get it without any guard rolling and does the type of rim style affect the offset / size.   Thanks everyone.
    • Lower parts are there. On passenger seat, bright yellow bit is the release mount. On drivers, bright yellow bit is the lower buckle for the other side. My bet is lowers are tucked out of the way as much as possible for visuals.
    • I'm guessing its a 4 point harness, 3 of the 4 belts are visible. I'm guessing the hidden belt is tucked down between the seat and door. 
×
×
  • Create New...