Jump to content
SAU Community

Recommended Posts

highflow sounds like the go. Only thing is i need quick turn around as its a daily for my mrs with no other car so will have to get another turbo and send it off seems from the site about $900. Pretty reasonable and those graphs seem to be spot on for street use.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7398820
Share on other sites

highflow sounds like the go. Only thing is i need quick turn around as its a daily for my mrs with no other car so will have to get another turbo and send it off seems from the site about $900. Pretty reasonable and those graphs seem to be spot on for street use.

Are you sure your missus wants that kind of power? Even 250 would be a handful in the wet...

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7398934
Share on other sites

Are you sure your missus wants that kind of power? Even 250 would be a handful in the wet...

Was going lower boost in winter or even when she drives it. In saying that she has pretty good control with the foot and is actually very good at getting the car up and going. Not one to just flatten it actually feels what the car is doing. She drove my manual LS1 before and that was a pig to drive. I do understand turbo is a different car but to be honest i have more chance of coming unstuck than she does.

Pretty sure on the avcr you can actually turn boost down in certain gears.

I pretty much only drive it after i do something to it or someone else does.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7399038
Share on other sites

Nismo GT diffs are great for daily driven cars.. they allow you to adjust the torque when it engages too.

I personally now run a 2 way KAAZ however the car is a street/track car and not daily driven.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7399153
Share on other sites

A real diff. Quaife or other helical/torsen centre. Nismo or other brand 1, 1.5 or 2 way mechanical, depending on how street/track the car is intended to be.

After doing a lot of reading a lot of people are saying shimming the diff is fine. The LSD in it is pretty tight and predictable from the very little driving i have dont of it..

What is everyones opinions on shimming?

Seeing as its purely a daily driven car.

Also going to leave it at the power it has now and get a track car it looks like. Mrs suggestion not mine. She must of had a good day...

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7399751
Share on other sites

id say drive the car first and see how the diff is behaving. also in relation to your driving style and power levels you are achieving.

An R33 VLSD in good condition isn't a bad bit of kit and if it working fine then I don't see the point in throwing money at a diff. There are always plenty of places to throw money at a skyline. Id throw money at good tyres and suspension before changing out a diff that was performing ok.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7401364
Share on other sites

id say drive the car first and see how the diff is behaving. also in relation to your driving style and power levels you are achieving.

An R33 VLSD in good condition isn't a bad bit of kit and if it working fine then I don't see the point in throwing money at a diff. There are always plenty of places to throw money at a skyline. Id throw money at good tyres and suspension before changing out a diff that was performing ok.

If there was an unlike button I would unlike this. A VLSD is only useful in an NA Pulsar.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7401394
Share on other sites

hey, don't get me wrong. I love a better diff. Ill have a better diff. But when there is usually always something to have money spent on in a skyline then jumping at this one unnecessarily its just not something id recommend. If he was going to be tracking a lot, then yeah for sure do it.

As is said, id go for tyres n suspension upgrades before a diff if the stocker is working ok.

Link to comment
https://www.sau.com.au/forums/topic/446752-r33-s2/page/4/#findComment-7402191
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Not sure the US can import anything other than the C34 Stagea's, but if you can and you need to to tow, DO NOT under any circumstances get an M35 Stagea. If it is just as a family car and your country/state allows it, absolutely and definitely get an M35 (3.5L if possible as it is effectively a 350Z) over a C34.
    • Punch your VIN (nm35-xxxxxx) into Amayama.com You can see everything there quite easily.
    • Thanks for that, I'll check it all out. I can always do the brakes last anyway if its a problem.  The 16's are super cool, if they do fit I'll cruise around with them for a bit.  
    • Well, that's kinda the point. The calipers might interfere with the inside of the barrels 16" rims are only about 14" inside the barrels, which is ~350mm, and 334mm rotors only leave about 8mm outboard for the caliper before you get to 350, And.... that;s not gunna be enough. If the rims have a larger ID than that, you might sneak it in. I'd be putting a measuring stick inside the wheel and eyeballing the extra required for the caliper outboard of the rotor before committing to bolting it all on.
    • OK, so again it has been a bit of a break but it was around researching what had been done since I didn't have access to Neil's records and not everything is obvious without pulling stuff apart. Happily the guy who assembled the engine had kept reasonable records, so we now know the final spec is: Bottom end: Standard block and crank Ross 86.5mm forgies, 9:1 compression Spool forged rods Standard main bolts Oil pump Spool billet gears in standard housing Aeroflow extended and baffled sump Head Freshly rebuilt standard head with new 80lb valve springs Mild porting/port match Head oil feed restrictor VCT disabled Tighe 805C reground cams (255 duration, 8.93 lift)  Adjustable cam gears on inlet/exhaust Standard head bolts, gasket not confirmed but assumed MLS External 555cc Nismo injectors Z32 AFM Bosch 023 Intank fuel pump Garret 2871 (factory housings and manifold) Hypertune FFP plenum with standard throttle   Time to book in a trip to Unigroup
×
×
  • Create New...