Jump to content
SAU Community

Recommended Posts

Looking at a couple of 2002-2003 nm35 A-RX stageas this weekend and just after some basic info.
I know there are topics and posts on here with all the info but its taking me way too long to cut through all the crap and find what i need to know.

I just want to know what the basic differences are between the different models of the nm35. (2004 and earlier, on a budget) and the major problems that are encountered.
Im a mechanic so im not too worried about the minor issues like oil leaks and such, just the issues which will cost me money rather than time.

Any help would be great, anyone complaining and telling me to filter through the other posts need not reply.

Link to comment
https://www.sau.com.au/forums/topic/446817-buying-nm35-stagea/
Share on other sites

Not a lot of replies Ben. Looks like everyone took your last comment to heart, lol.

If you buy a clean looking car (ignore km's as probably aren't accurate) you won't have too much trouble. Original turbo will eventually break, some sensors may randomly give you trouble (most common AFM & cam angle) but that's about it.

If were me buying again, I'd keep my eye on the SAU classifieds and also http://www.m35stagea.info/forum/index.php . You're more likely to get a good price on a well maintained car. Good luck with your hunt

Oh, I nearly forgot, the cam chain sprockets are failing all the time (see recent thread on here). Good news is almost all owners on m35stagea.info have already changed theirs....

:no:

Four models.

From base pack to most luxo

RS

RX

ARX (raises susp, and adds wheel arch trims)

AXIS (colour coded wheel arch trims and diff grill)

Now all models 2001-2003 will be AWD, turbo, and 5at. We can't import the pleb NA models. Or the RWD early models.

Different grades have different options. Just being a higher grade, actually doesn't guarantee it will have more options than any other car. Research the options, and figure out ones you want.

Honestly, just being a mechanic isn't really enough for these cars. They have defeated many mechanics due to the quirks of the car. That being said, there is a massive amount of info on here about them, and what I would consider the most knowledgable people in the WORLD on these cars.

Best comb the for sale sections like Leon said, as you often can pick up nice examples, with a few of what we consider "must do" mods, already done.

Good luck, and welcome to the community!

Cheers gents. ended up picking up a pretty tidy AR-X. Ugly colour though.
Only bad point is the turbo is noisey. I didnt think much of it since ive rebuilt many turbos before and the kits are usually only around $100.
UNTIL i did abit of searching and found they are in a bitch of a spot and its really hard to find rebuilt kits for. Fingers crossed its just a busted exhaust gasket or a boost leak leading me astray.

A rebuild kit you say, I don't think you will find that locally, but they are available in Japan as I have seen S/H turbo's come in with new ceramic turbines. I think a Hypergear highflow would be your best bet.

The gaskets are pretty reliable, and rarely make noise. Most likely the rear wheel has fallen off into the cat. Pressure test the intake before you try dropping the dump pipe, it's a biatch.

  • Like 1

Aslong as there's is no damage to non serviceable parts of a turbo, then rebuilding a turbo is a fairly simple job.

As far as the exhaust gasket goes, a gasket is a gasket no matter what car it's on and gasket fail. I've seen very small parts of exhaust gaskets blow out and cause whining noises many times before on many different cars.

I started this topic to find an answer to my question and assumed It would end there.

Now how to a delete this topic? because it's of no use to anyone now that I've got my car.

Welcome to the forum. You can't delete your topic and can't force people to only give responses you want to hear.

A gasket is a gasket.

Anyway you must be excited with your whiny dud color stagea. Any pics of the dud color?

  • Like 2

Lol nah not yet. It's that ugly gold colour.

Should have some pics once I lower it.

It's looking like wrong oil has caused the turbo noise. Changed the oil and the old stuff felt like 20-60 or something similar. Put some 5-30 in it and the noise has gotten a fair bit quieter. Pretty sure the damage has already been done and will still need a reco though.

Now that I know I can't delete topics, I might think twice before starting another.

I'm happy with the stock rebuild for now, not going for power. Will probably give in down the track and go for more power.

I think you need to do some research on Nissan turbo's, before your turbine wheel ends up in the dump pipe. ;)

I think you need to do some research on Nissan turbo's, before your turbine wheel ends up in the dump pipe. ;)

He's a mechanic Scotty; he doesn't need to do research.

I can't for the life of me understand why you'd voluntarily take the turbo out of one of these more than once, if you didn't have to.

But I'm not a mechanic either...

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Per Mark Roberts of Sonictune: Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • Per Mark Roberts of Sonictune:     Mark Robert Author At this time, no. No ETA either 2016-17 models. You will be able to purchase and install a 2018.5+ TCU though   TCU purchasing and pricing info! As we near the release of TCU tuning, I am going to answer some questions I get asked often.   What do I need for TCU tuning? At this time, you will need a 2018.5+ TCU to be able to tune. If you have a 2016-to early 2018, you will need to replace your TCU with the newer version. One good way to know if your TCU is good is if you have auto upshift in manual mode in 1st gear around 6500 rpms. If your manual 1st gear goes to 7k rpm and will hit the rev limiter unless you shift, you have the older TCU.   Why do I need to buy another ecu license/phone flash if I already have it on my ECU tune? The TCU is its own computer module. It is completely separate from the ECU. Because of this, you will be required to purchase a TCU license and, if your tuner has it, the phone flash license required to tune it via phone/bluetooth.   Do I need TCU tuning? TCU tuning is NOT required. However, the faster your setup, the more it will assist in track and dragy time consistency.   If I’m ECU tuned by (tuner A) can I get my TCU tuned by (Tuner ? Yes, since it’s a different module and a completely separate flash, you can have two different tuners. However, it is highly recommend that you have both tuned by the same tuner. For me, my TCU tuning will directly complement my ECU tuning style and features and running my ECU and another TCU or vice versa MIGHT cause some issues. At this time and for the foreseeable future, I will only be tuning my current ECU tuned customers TCUs.     I have a SYVECS AWD controller. Do I still need it? Yes! The AWD controllers main job is to control your AWD system. However, with TCU tuning, you will no longer need the auto-shift function as that will be done through the TCU. The AWD controller will still be very beneficial for racers looking to maximize traction on the launch.     Shift schedule changes: holding gears longer at lower pedal input as well as max shift rpm changes. Please note, the new ECU race rom coming out will address 90% of the shitty drivability issues these cars have through custom maps from myself and Racebox—as well as others I am sure.   Increase shift speeds: as seen in the videos I’ve been posting, the TCU shifts much faster once tuned.   Increased shift pressures: as also seen in the videos, much firmer full throttle shifts.      
    • The fancy pants red shock tower brace is finally incoming from MX5 Mania, getting it shipped from 'Merica has been a long and problematic process, and GWR, the 'Merican supplier will not ship directly to consumers outside of the US, Mania basically had to order a heap of them, the colour choice was silver, or red, and we all know anything red adds 5 killerwasps of dynotorques..... Whilst it does fit over a 2.5, and I've seen a few photos and videos of it being installed and fitting, google also says it might get real close to the FAB9 intake front runner, people in the US says it does fit with the FAB9 intake, except for one person who said it slightly touched.......so there is that.....LOL..... As it seems that I am the first in AU to have this combination of parts there's no local knowledge about fitment, so I'm just a willing guinea pig in this endeavour, I'll cross my fingers and toes and hope for the best In other news, I ordered stuff from China  on the same day I ordered the 23° silicone bend from Victoria, the stuff from China arrived a day ago, the 23° silicone bend is still travelling around Australia thanks to Australia Post, and "may" be here next week
    • Very good news...I contacted Racebox about it last night. My car is a 2016 so remains to be seen if it is compatible, requires a TCU swap, or is impossible.
    • What ECU are you running? This is probably the biggest question. If it's a PowerFC, I'd probably change the ECU and get something newer that will handle the injectors in a nicer way.
×
×
  • Create New...