Jump to content
SAU Community

R34 Vs R35 - Not School Holidays Yet, This Is Not What You Think.


Recommended Posts

FYI - V-Spec cars also came with the black interior after Model year 2000 and onwards.

but VS2 has the much sort after Carbon bonnet, which are bloody expensive to buy second hand. :rolleyes:

Cheers for the input guys. So safe to say that any spec will need bolt ons and a rebuild if the intention is to exceed 600-700whp. As far as the other specs are concerned, it's the asthetic look that makes them stand out more then the base model. safe to assume the Vspec 2 would be another $5-$10K more on the base model.

If you are looking to build for that power... get one with a good chasis... who cares about the rest

Another reason I bought the one I did, all the interior and floor tar was removed so I could see all seems and so I know I have a good undamaged chassis

If you are looking to build for that power... get one with a good chasis... who cares about the rest

I don't need or want that much grunt nor will I be removing interior/sound deadener etc.

Street car.

I'm sure he is referring to Ben as am I, I do want this much "grunt" and given when I ripped up the sound deadening in my 32 there is a bodgy repair under it I felt a lot better about buying the car being able to see all joins especially knowing want I wanted to do with it :)

I can answer this in a more logical way:

Having spent time in both cars....

The 35 is utterly brilliant, modern and technological master piece.

The 34 is a drivers car and requires input.

I own a 34 and would own a 35... but there is one thing stopping me.

The maintenance upkeep:

I can get a nismo twin plate clutch for my 34 for $2k and have it installed for $400... I would be scared to find out clutch replacement costs for a 35

My service for the 34 is $60 for oil and $15 for a filter, gearbox service is once every 60000kms and is $90... service costs for engine and gearbox is a 35 is...

265 road semi slicks are 250 for 265/35/18, cheapest tyres for a 35 i have heard of is $700 per corner

I havent mentioned mods or anything else, but you also have to look at how your budget and lifestyle meets you car requirements.

You either need:

A: Your own business (that does well)

B: To be senior in your career

C: Have a rich family to support you

If you own a 35 then obviously the cost factor in maintenance isn't a problem

As for the topic, I've owned both 34 and 35

Once you've driven a 35, you would never go back to the 34, its so 90s

Op. Have you driven either of these cars?

Like many have said. The 34 is a drivers car and the 35 purely is not. One is raw the other is designed to be smooth.

Do you like driving a manual And dumping the clutch? Or do you like flappy paddle gearboxes (apparently someone said is just like a manual car. Hmmmm sure)

Have you seen the size difference in these 2 cars?

This really shouldn't be such a big decision. Drive both and you will know which one is for you.

Not looking for someone else to make the call for me, and will definitely drive both, just interested in discussing the merits of both with informed commenters and it seems I'm not the only one.

I owned a 33, went for a spin in a similarly modified 34 and it felt very similar to my 33. Drove a 35 before Nissan released them here (just) but it was only a casual spin and yes size was notable as was interior quality differences and low down torque.

For me I think it will boil down to how I intend on driving it when it gets rolled out of the shed each fortnight/month.

Edited by ActionDan

one thing to remember the 34 came at a time when Nissan as a whole (not necessarily the GTR program) was on a down turn. the R35 is a resurgence .

Could always be a man and buy the ugly duckling (others opinion not mine) the 33 gtr ;)

  • Like 1

R35 is also first of a breed, and in many instances buying the first of something is risky business, where as the R34 is the last iteration of that family.

I had a 33, I'm one of the few who likes those too :)

I always wanted a 34, but as the R35 becomes more affordable it's a tough call.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Lamb roast on Saturday will be different 🥲
    • They are under bucket shims. Tomei provides a test shim kit and then any measurement of shim required. 
    • I always wondered how you were supposed to buy a set of 24 buckets and somehow magically have every single one of them yield exactly the desired clearance. I would have thought you'd need to assemble a cam with either 12 "sample" or "example" buckets of known top thickness (or a single such sample/example 12 times over!!) measure clearances at every valve, and then do the usual math to work out what the actual "shimness" of each bucket needed to be, before buying the required buckets to make up he thicknesses that you didn't have on hand.
    • I now seem to be limited in power due to my rev limit/hydraulic lifters in my built RB25. I'm looking into converting over to Tomei solid lifters. Question for anyone that has done the conversion. I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  I don't know where I got this idea, as so far I see no mention of this in any of the Tomei documentation. It just states I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
    • I couldn't agree more. I should have started from the get-go with a NEO or solid bucket conversion. I started looking into converting over to solid lifters yesterday. Now for some reason I was always under the impression that when using the Tomei solid lifter conversion, you would also require new valves (Longer or shorter stems, I can't remember which).  But I see no mention of this on any of the Tomei documentation. It just states that I need the Tomei solid buckets, solid lifter cams and upgraded springs. As my head is already built, all I would need is another set of 1000$ Kelford cams, 500$ buckets and about 4H hours of my time installing and I'm off to the races!?!? There's no way it's that simple, I must be missing something? 
×
×
  • Create New...