Jump to content
SAU Community

Recommended Posts

Hi guys,

I recently got my r34 tuned. While in the dyno the car was over heating and my tuner told me that there is lot of rust in the radiator and I will need a replacement. I was looking at some of the radiator in ebay and couldn't find any direct fit radiators for the car.

My question,

Is there any direct fit alloy radiators for r34 or will I need some modification to the standard fan shroud ? Or is it cheap to buy alloy radiator with fan and the shroud ?

Car:- R34 GTT manual 1998

I'm new to SAU.. So any help would be much appreciated.

Thanks.

Sam.

Link to comment
https://www.sau.com.au/forums/topic/449082-r34-gtt-radiator-help/
Share on other sites

Thanks for the reply Benc34 and wolverine. If the trimming is minor it should be all right. Just to clear things out.. when im purchasing a new alloy radiator it should be 42mm ?

Thanks. Sam

On the stock setup will an upgraded radiator help with oil temps at all? I find my oil temps getting to 120 deg c in summer on 40 deg days just cruising around with the stock radiator.

Nope.

On the stock setup will an upgraded radiator help with oil temps at all? I find my oil temps getting to 120 deg c in summer on 40 deg days just cruising around with the stock radiator.

Get an oil cooler with a built in thermostat.

Thanks for the replies guys.. I was looking at ebay and found this cheap alloy radiator.

http://www.ebay.com.au/itm/Full-Aluminium-Nissan-R33-R34-Skyline-42mm-Alloy-Radiator-W-15-Cap/161386477821

any comments on this ?

Thanks.

Sam

Any reasonably priced suggestions? I was just surprised that on a stock setup it would get that hot..

Well you can buy Japanese brand named stuff for up to $1000 or you can just get a sandwich plate with built in thermostat for about $100 some rubber hose (yes it works fine) and a small oil cooler radiator (spend the money on a good one). I'm in NZ so can't point you to the shops.

(Like this - not sure if this exact one will fit your car but I have a Mocal one for my RB)

http://www.ebay.com.au/itm/UNI-MOCAL-OTSP1X-OIL-COOLER-SANDWICH-TAKE-OFF-PLATE-WITH-THERMOSTAT-SEAL-SR-/121385762319?pt=UK_CarsParts_Vehicles_CarParts_SM&hash=item1c4327be0f

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Haha, i kow right? Could have bought so many cars for the same amount of money (or less) but driving Unicorn gives you at least +1mln to style 😅. Like wise man said "life's to short to drink cheap wine and drive boring cars" 😉
    • Newbie here, proud owner of an Autech 260RS. I'm on the hunt for wiring diagrams specific to the 260RS, particularly S1. I've ran my eyes through R33, R34 Diagrams, there are some similarities, however continue to find incorrect wire colours and pins on connectors in the 33,34 diagrams.   I was hoping someone could point me in the right direction? I'd be happy to pay for the originals in Japanese. I can translate them, at least they would be accurate.   Any help please would be greatly appreciated, never heard an RB26DETT before let alone driven one, and I've got a spaghetti monster of goodness to sort out.   Cheers Benny  
    • Hey all  im wondering if you can help me please I have put a rb20 box in my r34 gtt as my auto packed up and a friend had a spare box I know it’s not ideal but it will get me up and running for now. we have done the conversation and everything is working great but my Speedo we got a s13 speed sensor but my Speedo reads double now and I bought a speed converter but still not having any luck.  so I thought I’ll reach out and pick your brains  any help would be appreciated please as I wanna drive my car again 
    • Drain it. I got official Matic D but you can get whatever is listed as Matic D compatible.
    • Thanks guys,  Yeah I should at least have them dynoed, at least then I know what I've got as a starting point.  The springs on these are hard as rocks. I vaguely remember Russman saying he was going to sell the shocks to me with the rocks fitted, as he was keeping the softer springs for his new setup.  I didn't click at the time but of course that was to let me know the shock/spring wouldn't be matched.  I also remember pricing up new springs around 2014-15, but, house, money etc. it never happened. So that was another reason to have them rebuilt. I have rebuilt the forks on many motorcycles so I think I could handle the seals on these easily enough, but getting the valving right would be a rabbit hole I cbf exploring.  Duncan, interesting to hear RP was tuning these back then. I might give them a call.  In the mean time I have been busy fitting sway bars. The Whiteline rear sway bar I purchased 15 years ago finally got fitted, along with the Whiteline front bar that showed up last week. Just waiting on new links for the front sway bar to finish that off.  And my spare set of advan AVS VS5's should be back from the powder coaters in a Pearl White finish sometime this week, with a set of Hankook RS4's lined up for fitting.  And then I just have all the suspension bushes to do. A comprehensive kit is on the way... Lots to do before the Ararat hill climb. Cheers guys 🍻   
×
×
  • Create New...