Jump to content
SAU Community

Recommended Posts

I raised the issue of multiple stickies with other mods/admin some time ago now... i got no response at all.

However, rather than just complain about it, I have an alternative to offer.

Here is my vision....

1/ One thread for all stickies.

All information that is important can be stuck into one thread, with descriptive links so people have easy access to the threads.

2/ New stickies could remain as stickies for a couple of weeks, and then added to the list.

The Victorian section has one of these threads, and it works well.

We have one sticky, and all the important info that is needed can be accessed from the one sticky.

...like i said, it's just a vision.. but it could work.

Either that, or create another sub forum for announcements and stick them all in there. *shrug*

Problem with stickies is they are actually easier to ignore I find :D

LW.

i agree.

you keep seeing the same thing every time and after a while it becomes part of the background

as mentioned (sky031) the vic section has the 'one sticky to rule them all' thread which contains links to all the top-notch threads in the vic section. works pretty well i think.

Guys, I am in the middle of performing a moderator review to put new ones on etc. I can't keep track of everything on my own. I will be asking for moderator submissions shortly with precendence going to members who have donated.

Thanks.

Christian

good work

:(

i think its well setup now for the different forums. Too many mods was pointless too

The only other idea i had once was for breaking down into car.. r31, r32, r33, r34, etc to encourage a bit more focus on those that have specific questions on their cars. But i am sure this has been suggested

I think a few are scared to post on their car (especially simple questions) due to fear of people bagging them, or getting ignored.

yeah predator, i would like to seperate it into model - only problem is that the GTR's are all so alike, it'd be silly to have 3 areas for them. And the R33/34 Gtst's have the same engine also etc... It just didn't seem like a great idea... or do you mean as well as the normal forums we have? cause that might be a good idea...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • When you crank your car, and hit it with a timing light, can you see a steady crank timing?
    • Oh, forgot to add, A few months ago I was getting mixture codes and the car was using crap loads of fuel. You could smell the unburned fuel in the exhaust, it was crazy strong. Economy was over 17.5 l/100 and usually around 19. I smoked the engine and found a leaky CCV hose which I replaced and then I replaced my two pre cat O2 sensors, I also replaced the MAF. This fixed my mixture codes and improved my exonomy but I'm still 14 - 15 l/100 when pottering about town so something is still amiss. Throttle response is much better and it has more pep but I'd like to know why it's still so thirsty (and I'm hoping that whatever it is gives me a bit more poke).    
    • Car is on factory injectors/z32 maf/ q45 throttle body/ z32 ecu with nistune 
    • Hello all, currently finishing up a rb25 swap into my s14. Having issues with starting, car has spark (confirmed by pulling a plug and watching it spark), has fuel(confirmed by checking pulse/voltage at injectors all spark plugs are soaked in fuel). Car cranks over and pops into the exhaust with a heavy fuel smell but no attempt to start or run, I have torn the timing cover off and triple confirmed timing, turned the CAS in multiple spots both directions, attempted to start with coolant temp and maf unplugged, checked my fuel lines and made sure they weren’t backwards, checked voltage at cas/injectors/coilpacks, made sure all the grounds in the harness are connected and added a few grounding straps (1 from chassis to block, 1 from chassis to head, and 1 from chassis to igniter chip) I am getting stumped here. As a last ditch effort I made a full grounding harness tonight that’s going to run from the battery and add an extra ground from the battery onto the coil pack harness/igniter chip/ intake manifold/ Wiring specialties harness ground/ and alternator. I’m hoping maybe the grounding harness will fix it here but posting here to see if anyone has any other ideas on what else I can check. My fuel pressure is unknown right gauge will be here tomorrow.  IMG_3206.mov
    • yeah I was shocked when I checked my spare OEM on and as below that's how they come from Nissan. (side interesting note new NEO gearbox and replacement park lack the brass bush on the tips and its just all alloy) unsure about damage to the box currently back at 1110 to be pulled down/inspected and selector fork replaced as he built it previously and given the never before seen failure on his billet forks he is replacing it under warranty. He said he has used always OEM the keyway tab without issue for years so it could be an unlucky coincidence. I did talk to him about the sharp corners and stress concentration too. Re: hard shifts i got 7+ years out of the OEM one and the fork itself failed not the keyway. so could be bad luck as I said or an age thing + heat cycles in box and during fabrication of billet?
×
×
  • Create New...