Jump to content
SAU Community

Recommended Posts

No idea. But saw this in the Known Bad Traders list, similar name but diff phone #

Known Username(s): skyzthalimit
Email: [email protected]
Location: Western Australia
Names Used: Don, Don Shaw

Mobile Phone: 0415 051 226

  • Like 1

There's only one D SHAW in Sydney;

361 Kent St
Sydney NSW 2000
(02) 9279 0787
I doubt that's a match though - that's a pretty expensive apartment building by the looks of it.

With the BSB being the CBA in Martin Place....it does add up though

  • Like 1

+1

thats how things are bought online lol

That's how people get scammed and why sites like this are full of scammers taking advantage of that mentality.

Use PayPal or COD if you can't see the goods in person. Criminals and honest folk dress the same.

That's how people get scammed and why sites like this are full of scammers taking advantage of that mentality.

Use PayPal or COD if you can't see the goods in person. Criminals and honest folk dress the same.

Whilst i get your point, it's not that easy with online sales.. paypal is useless and in my 3 disputes (fake items, items not showing up) they have never returned my money even with their your covered policy. and COD is just not always available.. It's just the way of the internet..

Sorry to hear for the OP.

It's not the way of the internet at all. If it's not safe, simply don't do it...or be prepared to lose your cash. Like I said it is this complacency that makes this place such an easy target for scammers.

I've never had those issues with paypal. I've given them records of PM conversation and they've asked sellers for postage tracking numbers and I've been able to resolve every case I've ever opened. PayPal is usually enough to scare away most scammers. In any case, it affords you that extra protection over and above a bank deposit. You can also make the seller put up an eBay listing so you can see their feedback...I don't know of anyone who doesn't have access to an eBay account these days.

Fake items might be hard to prove, but that can happen in real life transactions too. This is about the goods never turning up at all. Just because transferring money blindly to someone online may be the only way to buy something off someone, does not mean you should necessarily buy it. People get so desperate for the parts they are chasing, that when they spot a good deal, they put on blinders to how dangerous what they are doing is and sometimes end up still without the part and minus a lot of money.

It really is the internet equivalent of some random guy in a carpark offering you electrical goods and you giving him your cash and saying can you come back next week with the goods. How often do you think that guy is gonna turn up?

Have some patience and take some precautions people - in 90% of scamming cases I see on here, both of these are missing from the buyer.

thanks for the support guys!!

I have some people on the right side getting more info on this guy. I have 150 cousins in sydney (really).

three of them are c#ps

who ever owns that account, is going to cry

They still need to be discreet until they can draw definitive evidence.

Requires lots of Qs + the right Qs + collate corroborative data.

Might take a while.

You deposited funds into a random person's bank account before receiving the item?

You would send out parts to a random person before receiving payment?

Just saying.

You would send out parts to a random person before receiving payment?

Just saying.

No I'd use PayPal or the many methods of doing it safer that I've already mentioned. No wonder scammers succeed with idiots like you around.

Just saying.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Assuming the current ECU is stock, it might be worth getting hold of a nissan data scan cable. It could be as simple as voltage at the ECU
    • You need to test for spark when it matters - ie cranking. Kill the fuel supply, pull a plug and earth it, set up a camera and go crank. The spark needs to be consistent, every other turn of the engine. Not some sputtering of occasional spark. The reason I say this is because spinning the CAS in the air is not the same as spinning it installed, and if there is a bearing problem in it, the disk might work differently in the air than in the engine. You won't want to try to set the timing unless you know the spark is happening right.  Also, reconsider running the R35 coils against the stock ECU. They like a different amount of dwell cf the originals. It's not massive, you can actually run them, but it is better if you can adjust the dwell (which you can with Nistune in the stocker, or with an aftermarket ECU). Besides any of that - when you had the multimeter out, have you got power where it needs to be, earth where it needs to be (and when, in the case of igniter triggers), etc?
    • Apologies for the long post, but needed somewhere to lay out the entire timeline of events and actions taken:   I've got an 89 GTR with a R34 RB in it. It's been running great all year, driven probably 500KM in the last month. It's not my daily driver, just a weekend fun car.    Build info: R34 RB26 - HKS 2.7 stroker kit, HKS adjustable cam gears, HKS turbo upgrades, Trust intercooler, R34 factory DENSO 440cc injectors, JUN chipped/tuned R32 ECU. All of this work was performed in Japan back in 2019.    Thursday 10/2/25 - It's a nice day and decided I'll drive it to work, I start it up in the garage and I notice it took a few extra cranks and sounded a bit funny. I figure maybe it was just because it was a pretty chilly morning. I pull it out into the driveway to warm up a bit before leaving. As I leave the driveway, it feels very off and sounds like a misfire. I pull it back in the garage to deal with after work and take the daily to work. I was able to diagnose it as a cylinder 5 misfire with the old spark plug test (unplugging each plug until a sound change with the engine running). I take off the whole ignition system, ignitor, plugs, spark. *Important note, it is still on the R32 ignition system with the separate ignitor system. I test each system with a multi-meter and nothing presents as a smoking gun. I put it all back together and it starts up no issue. I go ahead and order the PRP R35 ignition conversion kit. It should arrive today (10/13/25)   Friday 10/3/25 - Another nice day, car starts up great and drives great all day. Very pleased that everything seems to be OK   Sunday 10/5/25 - Decided I'll take it to play some golf, load up and drive to the course about 25 minutes away. Drives wonderful the whole way there, I pull in the parking lot and the engine completely comes to a stop. I do not recall if it sputtered at all, but just remember all of the sudden the engine was off. I roll it into a parking spot, try to crank it back on and nothing.  It'll crank and crank and not even try to start. End up getting it towed back to my house and push it up into the garage.    Items I have checked: Fuel in the tank Fuel Pump relay Fuel pump fuse  Spark Plugs & gap Coil packs Ignitor    I know the cylinders are getting fuel as the plugs smell like fuel after a start attempt. I tried spraying starter fluid into the manifold and cranking and not even a sputter.    I decided to do the live CAS test (removing the the CAS, ignition on and spinning the CAS stalk to see if the injectors pulse and spark is active). All of the injectors were pulsing and I have spark at the plug. The half-moon end of the CAS did seem very loose, I'm not sure how much play is supposed to be there, but it was more than I expected. There was no in/out play of the shaft, just the tip end that is pinned on had quite a bit of play.    CAS Play video   When I put the CAS back in, I stupidly did not re-time the engine. I know I need to do that tonight, however, I do not think it will start given it seemingly was not the issue. My plan is to do the PRP R35 coil kit and retime the engine at the same time.    I plan on ordering the Haltech Nexus Plug-in ECU once they are available again, but ideally would like to get this sorted before firing the parts cannon at it and potentially adding more variables.    Anything glaring that I am missing here, I'm a bit at a loss?          
    • Get it on a dyno. Get something logging Consult. Run it up and find out what is causing it.
    • Looking for a plenum for rb25 de+t neo  Not looking to push much power maybe 300kw at the wheels, is there much difference in flow for Freddy “Greddy style” compared to original Greddy or options like Proflow or Otaku garage?    I won’t be porting the de Neo head for now as I think it’ll be fine 280-300rwkw but appreciate the help and any experiences anyone has between them and any advice. Thanks  Looking at this plenum for now below 
×
×
  • Create New...