Jump to content
SAU Community

Recommended Posts

Your propaganda and JEDI-77's Z32 have swayed me to appreciate and even consider these cars to be cool.

Maybe I need to have a ride in one

:D Mark's car is nice, there are plenty worse ones you could have a ride in!

They are no more troublesome than any other 25ish year old import, owned by people who can't afford the basic maintenance.

There are many, many shitboxes not worth saving (soon to be parts cars), and a few very well cared for/maintained/modded examples. There are still enough average/above average ones floating around that could be nice with a bit of time and effort (and money).

  • 2 weeks later...

Final fuel line re-routing has begun. Came to a stop when I realised I needed to connect 2 lots of 2 female hose ends. Always forget the males.

So took the time to install the Twinz chin spoiler, looks good, fits well, but now I have to redo my undertray as access to mounting holes are reduced.

20160425_172210_zpsvklqeyxd.jpg

20160425_172233_zpssbfet6kl.jpg

  • 2 months later...

Fuel system is complete again now. 1650s are in etc

Just finishing up install of in cabin fuel pressure gauge, have a grommet or 2 to replace, and footwell to put back together.

Then just need to find the laptop charger and I can hopefully fire it up again.

  • 4 months later...

Not long after my last post, I did find the laptop charger. Also discovered that the laptop battery was proper stuffed and would not power on. So I had to buy a new laptop, and all my tunes are stuck in the old laptop. Anyway...

I did get the zed fired up again and it idled perfectly.

Not long after that, I happened upon an Adaptronic select on the forum here (thanks Count Grantleyish, top seller!), and since I am obvioulsy not in any great hurry to get this bloody car working again, I decided to bite the bullet and replace Nistune with Adaptronic. Nearly got it ready to start too, when those bastards at Link ECU had a special this month on their Z32 plug in G4+.

So the Adaptronic was gone before it began, and I am currently waiting for the Link. At least alot of the wiring I did for the adaptronic isn't wasted, just needs to be re-terminated at the ECU (widebands and all the other external sensors).

In the meantime, I have also sold off my original Ross Metaljacket balancer, with a view to get one of the new ones with the trigger wheel already attached. Obviously all the bracketry and sensors that go with this will need to be sorted at some stage. Like everything, it all takes time and/or money, which I don't have much of either with now 2 kids under 1.5.

Also forgot the fancy sump i picked up. It is from Specialty Z in the states, was used on a local race car that met an untimely end at lakeside. It is a factory sump, modified to suit.

Big capacity, fancy trapdoors and baffles and scrapers and stuff20161015_180024.jpg

20161015_180031.jpg

20161015_195449.jpg

20161015_180043.jpg

  • 2 months later...
  • 10 months later...

Bit of an update.

Car is now running on the link G4+, with crank trigger and modified CAS. Have a new sync trigger to install that replaces the CAS altogether, but haven't got there yet.

Going to be removing the AEM widebands and replace them with Ecotrons ALM CAN II. Received them yesterday so no more excuses.

Also been working on an in car pc/dash setup which is basically complete. It is a little bit rougher than I'd like but still pretty happy with how it turned out. Will fine tune the display as I go, was just a quick layout to define the size. The blue LED for highbeam is way too bright (even with twice the resistance of the green indicators) so I will have to do something there. Have some different LED's with a diffused face in transit, so they might work better, even tho I do like the chrome bezel on these.

Basic setup is as follows. 7in Win 10 touchscreen mini pc in centre console (armrest), dash screen is the 2nd display and is a usb powered raspberry pi hdmi 7in. Software is the regular PClink.

20171021_232121.thumb.jpg.2bad97d4a834a31f8392440e8a3e6b92.jpg20171024_132326.thumb.jpg.a210506ea99dd3723c8f965e5d3d084b.jpg20171024_155150.thumb.jpg.817d9f3d6b48a0582f013dce9ea040ef.jpg20171026_225304.thumb.jpg.2b9c94746b9de2a2a0eec885b03bb484.jpg20171029_140355.thumb.jpg.e18c4dd85dae63b0504d5afb628c852e.jpg20171028_224427.thumb.jpg.ab6235d2aabb17f2d28fe6a9c39f0e92.jpg

car pc dash small day.mp4

Fuel setup has also been changed. All fuelab products removed. They were the source of some intermittent delivery issues I was having. Working just enough to send me on a massive wild goose chase changing everything else.

Anyway, settled for now on twin 460's in tank, no surge tank anymore, turbosmart FPR2000 and a Radium damper.

  • Like 5
3 minutes ago, GTofuS-T said:

That's awesome! Love the dash!! would be keen to see a bit more detail on the development of it one day. 

Thankyou! Once I have settled on the setup and finished it all up I will add some more details and pics of the whole thing.

  • Like 1
2 minutes ago, PranK said:

I like the concept of a high beam dashboard LED burning the retinas of the driver. People will use high beams sparingly then. :)

 

haha I agree 100%, just not in my car :D and I would like to be able to see again shortly after I turn them off, which as it stands, I can't. It is that bright. I was quite surprised as they are the same series as the green ones, and they are pleasant.

  • Like 1
4 minutes ago, MagicMikeZ32 said:

haha I agree 100%, just not in my car :D and I would like to be able to see again shortly after I turn them off, which as it stands, I can't. It is that bright. I was quite surprised as they are the same series as the green ones, and they are pleasant.

Perhaps you can direct the light from the LED out the front to supplement the high beams ? :)

8 minutes ago, PranK said:

Perhaps you can direct the light from the LED out the front to supplement the high beams ? :)

Funny you should mention that... Since I have replaced the foglights with the carbon ducts, night viability is terrible without high beams, so I have plans to do something to supplement the low beams (and also the parkers that are supposed to live in the foglights).

But I am a while off a mountain run so no great rush to start on that.

  • Like 1
  • 2 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
    • Either the bearing has been installed backwards OR the gearbox input shaft bearing is loosey goosey.   When in doubt, just put in a Samsonas in.
×
×
  • Create New...