Jump to content
SAU Community

Recommended Posts

When wise people dont have what to tell,they just dont speak,i think you are not one of them.

Already found some info,that with this ecu car runs around 350-400hp,so it means that i need to throw it away?i dont think so

thats what i did today,was making topic yesterday,thinking,that somebody have exactly same ecu and can share info.Ofcourse my tuner said that standalone is the best,but he said also that its a good start with that ecu aswell,cause my funds wont let me standalone right now and i got this ecu for free

http://www.sau.com.au/forums/topic/130685-blitz-access-ecu/

Quick google search revealed this from 9 years ago.

As Benny said. What's it tuned for?

Looks like it's a "remap" of god knows what. How does the ecu know what YOUR car wants/needs?

Ditch it, get a decent ecu and don't do things twice.

gave this ecu to my other friend,who has R32,but with R33 GTST engine and harness,we have driven a bit and he told,that he feels a big difference,than stock ecu,he has big FMIC,3" exhaust,a bit bigger turbo than stock with 1 bar boost,Pink AFM,cold intake,Walbro fuel pump,almpst everything,what Blitz states has to be added for that ecu,we will try to go on a Dyno day,which is every saturday,so we can check what is what

what you mean?the car was runing very good,he has all wideband stuff and gauges in the car,so we see,that A/F ratio is very good,its even more rich,than with stock ecu,what is good and safe,detonation gauge shows no signs of detonation,we are not noobies in the cars,so dont think that we are doing everything blind

Your arent noobs but ask some seriously noob question about a random ecu...

Even more rich than the stock ecu is mental.

Is your detonation gauge set to the correct frequency? Do you know what pinging sounds like?

Good luck with it all.

i dont think that its a noob question to ask if somebody had any experience with such ecu,to share experience.Detonation gauge we use is from pro race,a lot of guys in my country use it in profesional sport,so i trust it 100%.With rich fuel,i mean,that we already see,that fuel map in this ecu is set for more fuel,so basicly its always good in hard driving to be in safe A/F ratio

Ok.

You are silly to trust a gauge 100 percent.

They need to be setup to detect the correct frequency based on bore size. Get that wrong and it won't work correctly.

One more time. Do you know what pinging sounds like?

More fuel than stock is crazy. Not good.

At the end of the day, if you are happy and the car runs for a while that's all that matters.

Please update this thread if you have any issues with the car.

Edited by Ben C34

So you call all these profesional guys that installed this gauge stupid? Interesting, you even dont know how they are good and you talk like this.Gauge is set correct way, i am 100% sure, they know their job.You should know, that in drift,guys run fuel maps at least 11 a/f ratio, to avoid detonation, and our a/r is around 11.5/12 on fool load, I am really sure that its not too rich, we run our other cars same way with standalone, other thing, when you use car only as a daily.

Pinging, I dont know that word, can you explain?

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
    • Then, shorten them by 1cm, drop the car back down and have a visual look (or even better, use a spirit level across the wheel to see if you have less camber than before. You still want something like 1.5 for road use. Alternatively, if you have adjustable rear ride height (I assume you do if you have extreme camber wear), raise the suspension back to standard height until you can get it all aligned properly. Finally, keep in mind that wear on the inside of the tyre can be for incorrect toe, not just camber
×
×
  • Create New...