Jump to content
SAU Community

Recommended Posts

Ive heard blokes doing 12-15000 k's plus track days no worries on the RS3's.

If its a weekend drive are you really gunna care about replacing tyres every 3 or 4 years? All you will care about is having the most grip ya can to make the most outta your toy when ya driving her :D

Well i know i do anyways lol

  • Like 1

Reporting back with pricing:

Michelin PSS $1550

Hankook RS3 $1150

Nitto NT05 $840

PSS is out of the question due to price plus the RS3 seems to be the pick of the bunch, based on feedback.

NT05 is most appealing due to price and availability so the question I have is the RS3 that much better or are we splitting hairs? The extra $300 doesn't bother me...what would u guys go for, keeping in mind I'd be lucky to drive the car once a fortnight (sad huh)

  • Like 1

I'd still say go with the hankooks mate ive personally never driven on the NT05's to know how much difference there would be between them. But i believe the hankooks would probably last alot longer as nitto use toyo rubber which is always a pretty soft compound. :)

Hey Mick do the 275/35s rub a lot, or only full lock?

I'll guess this is for me, yes at full lock they rub a bit, but there is two reasons for it 1) I should have got 30 series, which is the correct size for the 34, instead of 35 2) my rims are +12 offset and with +18 they wouldn't push forward or rear as much reducing the rub or even stoppng it altogether

U have a 34 right?

It gets me thinking whether I can go from the recommended 265/35/18 to a 275/30/18 as the lower series would help with full clearance but then again the profile is relative to the width so maybe the 30 series would have a higher sidewall than the 35 series...mine is an r32. Anyone know if this would work as I have 18x9.5+22?

I'll guess this is for me, yes at full lock they rub a bit, but there is two reasons for it 1) I should have got 30 series, which is the correct size for the 34, instead of 35 2) my rims are +12 offset and with +18 they wouldn't push forward or rear as much reducing the rub or even stoppng it altogether

PSS like other higher performance road tyres (continental etc) will mince the outside sidewall pretty easily on heavier cars. I'm going through this at the moment with my big tanker.

R32 GT-R but better, but you are carrying more speed... Really depends if you are doing track days or not as one track day

You've then got the more extreme performance of NT05/AD08/R-S3 etc. Can venture to the track an not be as worried.

If it's just street then it probably doesn't matter a hell of a lot and the NT05 for that price would seem the pick of the bunch.

If you were doing the track days the AD08® still seems to be most popular as the tyre is like a brick, sidewall of amazing excellence which gives the confidence one needs (and also decent wear). I loved my AD08 for that reason and went through 2 sets of them in my time on the 33R, they took such an epic beating - was very surprised. Just the price that is the killer.

R-S3 seem the better tyre for a single lap time, AD08 for the lap after lap.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Cheers. Skyline is back on the menu, can’t get rid of it. It’s like a child you don’t want, or herpes 
    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
×
×
  • Create New...