Jump to content
SAU Community

Recommended Posts

Well its not a skyline but since its a classic datsun I think it deserves a thread in here too :cheers:

Old does mean classic, right?

I'll put up some photos later today, but basically she's a gorgeous 1980 200b with some small patches of rust. We might get round to cutting them out one day.

So far its made it home to the garage after a quick tune (thanks Nathan!) Everything is running as well as can be expected for an old car.

Rust...yep, plenty of that....doesn't look like anything's going to fall off any time soon but theres plenty of holes in the bottom of the panels and sills.

The car is just going to be attacking motorkhanas in Kel and Tosh's hands so it doesnt need to be roadworthy (lucky that). The seats except drivers are gone so the interior is ready.

Future plans.

First thing is welding the diff up, the rear axle is finally off so it will be done in the next day or two. Then chuck it all back on including those complicated looking drum brakes :(

After that....it depends how it runs next sunday, possible plans include:

Needs a new steering wheel

Swapping to a bluebird trx rear axle so we get some nice disc brakes

New springs and shocks....the ones in there look pretty bad....not sure which ones to go for yet

mmmm engine mods, or just whack a ca18det in there

maybe front caliper upgrade if the are having trouble, but probably not necessary.

Link to comment
https://www.sau.com.au/forums/topic/45290-the-mighty-200b-khana-car/
Share on other sites

duncan good stuff mate.

looks like the silho will be made into an events car as well. i dont wanna part with her but cant afford to insure and register her either hehe.

go the datto.

but yeh, as pete said. get a 31. world's fastest car

duncan good stuff mate.

looks like the silho will be made into an events car as well. i dont wanna part with her but cant afford to insure and register her either hehe.

go the datto.

but yeh, as pete said. get a 31. world's fastest car

rofl

if you say so Mark, Go the 31s :headbang:

duncan good stuff mate.

looks like the silho will be made into an events car as well. i dont wanna part with her but cant afford to insure and register her either hehe.

go the datto.

but yeh, as pete said. get a 31. world's fastest car

rofl

If you say so Mark, go the 31s :headbang: Even if everyone else hates them

Can any one say 4th gear on the brakes???

My datto 1600 used to do that.....quite often too. l20 stroked to 2.1 and stanza sss 5 speed. with nissan 720 diff.....(BULK SMOKE):burnout:

diff got welded tonight, back in tomorrow, looks like it will be a goer.

[Jedi Mind trick]

There is no story about my finger

/Pete

There is no story about your finger

[/end Jedi Mind Trick]

:)

any excuse to avoid taking that diff out I say

/ignores pete and hopes everyone else does too

Nathan welded up the diff for us last night, and we threw it back in today....thanks to Chris for his help, especially with the jigsaw puzzle that is drum brakes...

Everything was looking good......until we undid the gearbox drain plug.

Now of course you never remove a drain plug without opening the filler plug first to make sure there is no problem right? right.

So we took the gearstick off, no worries just lob the fluid in there and everything is sweet.

Undid the gearbox drain plug and out comes 2l of mud (almost as bad as the diff oil, amazing how bad oil looks after 25 years)

Did it up again and started pouring fluid in the hole where the gearstick goes. Realise *very* quickly that the fluid doesn't drain from there to the rest of the gearbox.

Curse

Swear

Have a look at the gearbox and find a filler plug with an allen key hole (which I didn't have either) which will require an oil pump

Give up for the day.....

well, the 200b debuted today, and while it went OK some mods are required, steering wheel, proper suspension, new seat....

....oh, and the smoke got out of the engine...... http://www.hgeconsulting.com.au/dontletthesmokeout.wmv ....guess we'll do a compression test in the morning then look out for a cheap second hand one :)

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I thought it could be an issue because the standard plate was flexing when stressed. Maybe the original gear set will hold a bit better without flex? Last time on the dyno it made around 670nm at the hubs. Now it have bigger turbo and better intake but have not been on a dyno yet. The car is being used from family trips to drag race events. So the shifts can be a little violent. It is grinding if I shift to fast so was thinking I should overhaul it soon.
    • From the factory on RB26s there's a fitting on the intake manifold collector/"plenum" that provides pre-throttle boost signal. That's how they did it back in the day, I figure it's fine to replicate it.
    • I would be surprised if that wasn't the issue. It's probably telling you, that even if you remove the plastic liner, you may have some other clearance issues that may occur too in some scenarios. IE, tyre to guard. It looks like someone has already rolled the lip, but you may still have issues in the future IE, turning and hitting a bump etc. The fact it changes how bad it makes the noise when you are going backward vs forward is highly indicative that it's the tyre rubbing. They do make a terrible sound, even if you're only pushing a project car that has a liner hanging down on a tyre!   Has the car been lowered? If it has been, what is the measurement from the centre of the wheel hub to the lip of the guard straight up?
    • Summernats cruiser?
    • Mark's a bit smarter than people give him credit... He'd convince the person that is to become dead, to drive him to the forest first. That way his car has no evidence in it, and he's free to dispose of their vehicle permanently how he sees fit too...
×
×
  • Create New...