Jump to content
SAU Community

Recommended Posts

In saying that the first thing I noticed when changing to a 3.5 inch y pipe collector was how quick they spooled up in comparison. Quite a noticeable improvement from 3800 and had to adjust the ebc to stop a spike.

  • Like 1

Here's a dyno of the Z-tune with same exhaust as mine except it's titanium. Much better graph but I guess it's all the work done to the motor internally that makes the difference. So now every one knows much power the Z-tune really makes, he he.

post-137648-0-96722500-1446182273_thumb.jpg

  • Like 1

Isn't single 3.5 the same surface area as twin 2.5?

Id say the issue is that its 2.5" at the dumps where in a usual 3.5" exhaust setup it would have a beefier front pipe....

Just saying things for the sake of things

  • Like 1
  • 1 year later...

So after 2 years its finally time to bring a conclusion to this thread. Most of the lag has been fixed since last dyno run and only 2 parts were changed.

Replaced stock twin turbo pipe with Nismo inlet pipe, this I think made the biggest difference to the response and driveability of the car. Boost was slightly higher and coming on earlier as well. Despite what some people have said, this part made the biggest difference for me.

2nd part was changing the exhaust system. Replaced the nismo exhaust (3 inch) with mine's front pipe and tomei 3.5 inch exhaust. This lowered the restrictions and improved top end.

So in conclusion for low mount twins for driverability and reduce lag, best bang for buck is better merger of twin turbo pipe and bigger exhaust. All other mods such as dumps pipes, intercooler, intercooler hard pipe, decat, etc although made a small difference to mid-high did not do much to low-mid and driverability.

Dyno graph to follow.

Edited by baicai
spelling
  • 3 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi, SteveL Thank you very much for your reply, you seem to be the only person on the net who has come up with a definitive answer for which I am grateful. The "Leak" was more by way of wet bubbles when the pedal was depressed hard by a buddy while trying to gey a decent pedal when bleeding the system having fitted the rebuilt BM50 back in the car, which now makes perfect sense. A bit of a shame having just rebuilt my BM50, I did not touch the proportioning valve side of things, the BM50 was leaking from the primary piston seal and fluid was running down the the Brake booster hence the need to rebuild, I had never noticed any fluid leaking from that hole previously it only started when I refitted it to the car. The brake lines in the photo are "Kunifer" which is a Copper/Nickel alloy brake pipe, but are only the ones I use to bench bleed Master cylinders, they are perfectly legal to use on vehicles here in the UK, however the lines on the car are PVF coated steel. Thanks again for clearing this up for me, a purchase of a new BMC appears to be on the cards, I have been looking at various options in case my BM50 was not repairable and have looked at the HFM BM57 which I understand is manufactured in Australia.  
    • Well the install is officially done. Filled with fluid and bled it today, but didn't get a chance to take it on a test drive. I'll throw some final pics of the lines and whatnot but you can definitely install a DMAX rack in an R33 with pretty minor mods. I think the only other thing I had to do that isn't documented here is grind a bit of the larger banjo fitting to get it to clear since the banjos are grouped much tighter on the DMAX rack. Also the dust boots from a R33 do not fit either fyi, so if you end up doing this install for whatever reason you'll need to grab those too. One caveat with buying the S15 dust boots however is that the clamps are too small to fit on the R33 inner tie rod since they're much thicker so keep the old clamps around. The boots also twist a bit when adjusting toe but it's not a big deal. No issues or leaks so far, steering feels good and it looks like there's a bit more lock now than I had before. Getting an alignment on Saturday so I'll see how it feels then but seems like it'll be good to go       
    • I don't get in here much anymore but I can help you with this.   The hole is a vent (air relief) for the brake proportioning valve, which is built into the master cylinder.    The bad news is that if brake fluid is leaking from that hole then it's getting past the proportioning valve seals.   The really bad news is that no spare parts are available for the proportioning valve either from Nissan or after market.     It's a bit of a PITA getting the proportioning valve out of the master cylinder body anyway but, fortunately, leaks from that area are rare in my experience. BTW, if those are copper (as such) brake lines you should get rid of them.    Bundy (steel) tube is a far better choice (and legal  in Australia - if that's where you are).
×
×
  • Create New...