Jump to content
SAU Community

Recommended Posts

Hi gents,

I got problem that my car often will shudder when i speed up to 110km/h and continue shudder if I acc to higher speed. I can feel the vibration from the seat, not from the steering wheel, i think it is rear wheel problem?

currently my car has 4 brand new rotors, 4 brand new rims with balanced and 4 good tyres (about 10000km).

anyone has idea or experience on this? :unsure:

Link to comment
https://www.sau.com.au/forums/topic/454705-often-shudder-at-110kmh/
Share on other sites

I would be looking at tailshaft and centre bearing also disc rotors nd CV joints.

I actually I asked do full underneath check by my mechanic and he noticed me some problem:

1. front inner rear control arms minor tear

2. rear lower shock bush's minor cracks

3. rear upper inner middle diff bush failed and leaking

I am not sure it the shudder relates to above problem

Yeah and radius bushes

I actually I asked do full underneath check by my mechanic and he noticed me some problem:

1. front inner rear control arms minor tear

2. rear lower shock bush's minor cracks

3. rear upper inner middle diff bush failed and leaking

I am not sure it the shudder relates to above problem

I would be looking at tailshaft and centre bearing also disc rotors nd CV joints.

yeah, I read some threads here and get some points:

tailshaft

tailshaft centre bearing

uni CV joints

actually i have set of brand new disc rotors.

Aftermarket Rims not centered on the Hubs or Water in the Tyres or a Bubble in a Tyre.

I have 4 hubs adapter rings and there is no water in the tyres. i already switch the tyres between front and rear. let me see if the problem still here or not

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Input shaft bearing. They all do it. There is always rollover noise in Nissan boxes - particularly the big box. Don't worry about it unless it gets really growly.
    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
×
×
  • Create New...