Jump to content
SAU Community

Recommended Posts

I cant seem to find a cat back exhaust system for my r32 gtr. Im looking for an exhaust that 4 inch all the way from cay back. Or at least starts to get bigger as it goes further back. I have one that does that for my r33 gtr but cant seem to find a one for my r32.

Link to comment
https://www.sau.com.au/forums/topic/454822-looking-for-a-good-r32-gtr-exhaust/
Share on other sites

I cant seem to find a cat back exhaust system for my r32 gtr. Im looking for an exhaust that 4 inch all the way from cay back. Or at least starts to get bigger as it goes further back. I have one that does that for my r33 gtr but cant seem to find a one for my r32.

Generally you need bigger exhaust where gasses are hottest? Closer to the front.

I can build one. But I understand your point with the bigger exhaust up close to the turbo. Kml. Make it. You need to see how they make them over hear. Imagine a pigeon taking a crap on a peace of pipe thats about how that will look. I will just bite the bullet and build one. All I would want is a nice looking muffler. I would like to have a 4" inlet with some kind of a bigger tip. Funny you would mention that bigger pipe at the heat source. On my r33 gtr I have a 4 inch pipe coming off a gtx3582r 3" vband that goes to a 4" pipe.

Hmm. I hate welding thats all.

Edited by MJTru

Seeing as you're going to drag race it. Why not build 2 catbacks one for the street then some sidepipes or something to delete the cat and just dump the exhaust gas with no possible restriction?

Bit of a headache but it would be cool and you don't see it often

Well over here we have no emission laws. Im not actually in the states just on a small island about 30 minute plane ride away. This is how I get to enjoy all the jap cars. Its weird here. Lol. So because of the fact that I have no emission laws here I will just run it all the way back no cat ever. None of my cars have cat's on them. But stull would like a nice muffler. I've been looking all day cant find none with a 4" inlet. I may just have to mod a 3" inlet one. Hmm. This sucks.

As for the 2 gtrs its tuff to maintain them as it is. :D

Absolutely no laws. Its all at the officers discretion. Well im sure there is but its so slack. Even when it comes to seat belts. I thought the same thing when I first moved here.

If there is the option to just have a side exit exhaust it would be better for the car and obviously it sounds pretty loud.

Varex is a brand of exhaust/muffler, not something you'd really be after for your gtr.

If you wanted to go the full way and exit out the back then custom making would be the next best option.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Initially I thought having a pair of Recaro seats would be a big bonus, it turns out these do get a little uncomfortable on long journeys (my fault, not the seat). I had a look through the GSM Performance website at reclining seats and booked an appointment to visit their show room. I got the Recaro Sportster CS for the R34 from here, was very happy with the service received so of course a re-visit was in order. Unfortunately the two Corbeau seats I had chosen aren't on display but they had 4 other options available. Two seats dug into my back, one dug into my legs and the other was perfect. I also found out that Recaro seats use a larger bolt pattern so some adaption was required. Luckily GSM offer some universal adaptors that should solve this problem. I searched the interwebs for price comparisons and Corbeau themselves were the cheapest at £300 cheaper (for the pair). I asked GSM if they could price match, unfortunately they couldn't. I later received an email saying Corbeau would honour them the same discount, but the purchase was already made. I did however order the brackets from GSM, both arrived on the same day. I started with the passenger side seat, knowing this was going to be a little trial and error. There are 3 mounting holes at the front and 2 at the rear on these JURAN Racing seat rails.  With the adaptor brackets mounted, the allen cap bolts started to push into the seat, NOT GOOD!  The rear mounting holes lined up but there were issues at the front. The holes were 1/2 hole out, so the brackets got a tickle with the drill to modify the holes. The supplied bolts weren't going to be long enough and a spacer was needed to stop the adaptor bars from bending. A local fasteners company supplied be with some nylon spacers and longer bolts (M8x30, although these will be replaced with 35mm long shortly) A before and after I pre-drilled the front bracket before making a start on the driver's seat to save some time. And in no time at all that was in the car too. The all black seats have transformed the interior and these are MUCH more comfortable. The only downside with the new Corbeau seats is I sit a little higher, but I'll happily accept that over discomfort. The Youtube video can be found here: https://www.youtube.com/watch?v=wPyttKPktXA
    • All 3 I guess. The car came with the JASI Aero 4 door Type R Full Kit unpainted so this was one thing at the top of my list to complete then I noticed there were body panels parts for this kit so i picked them up along with some black mesh to fill in the front bumper and front side air vents. car is at a paint and body shop atm completing this work. Next I will be addressing the internal bells and whistles, great summer project I can do with the kids.  full interior removal - ,boys car sound deadening - pads and spray ,boys stereo, sound, lighting - Big 3, GTT or bigger alternator ,kids head lining - dye black add star lighting mod ,daughter. That's it for the next 5-6 months. I have some motor maintenance  work i have to plan out. oil filter relocation, gaskets, mounts. beyond that, mind is starting to turn over if i can use a DET intake plenum, block off turbo ports & pipe in a air intake.      
    • roller coaster of a ride. Alarm system was removed & main harness was repaired where possible. still no fix just random successful starts. moved on to the replacing the ignition switch and relay. well all this troubleshooting & repair has been going on, the car is at a paint and body shop being pushed around. Ive been going down there on odd days after work to get it sorted.     
    • 5th November if you want to come out for a spin wakfield
    • PROBLEM WAS BROKEN COOLANT SENSOR!!! Replaced with a new one and its running mint.
×
×
  • Create New...