sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 sorry to bring up this thread again however i have recently found out about mambatek turbos, they seem to be of the same quality of kando turbos and the same price range except ball bearing and have been looking at this turbo in particular: http://www.ebay.com.au/itm/MAMBA-GTX-Ball-Bearing-Turbocharger-GTX3063R-Nissan-Skyline-GTR-R31-RB20DET-300P-/181736850896?pt=LH_DefaultDomain_15&hash=item2a505c45d0 not knowing much about turbos myself would someone please tell me how this would work out on an rb20 lag/power wise? would be a great help if possible thanks Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535264 Share on other sites More sharing options...
Missileman Posted May 17, 2015 Share Posted May 17, 2015 none has tried it, man up and be the first, and then report back Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535266 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 it is tempting and seems good value for money, i was going to get a kinugawa td05 18g 8cm before i found thisspecs td05: Compressor wheel: 50.5/68 mm Turbine wheel: 49.2 / 56 mm 8cm housing journal bearing specs gtx3063r Comp. Wheel : 47.1 mm / 63 mm/Trim 56 (11+0 GTX Billet Wheel w/ Extend Tip) Turbine Wheel : 52 mm / 56.5 mm / Trim 84 ceramic dual ball bearing 10cm housing Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535270 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 they do have this http://www.ebay.com.au/itm/MAMBA-Ball-Bearing-Billet-Turbocharger-GTX2867R-Nissan-SR20DET-S13-S14-S15-A-R64-/171761474206?pt=LH_DefaultDomain_15&hash=item27fdc81a9e which is exactly what i would like except it only comes in bolt on for the sr20 which is extremely annoying Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535276 Share on other sites More sharing options...
Missileman Posted May 17, 2015 Share Posted May 17, 2015 (edited) SR20 uses a different turbo to manifold flange and dump flange , so you will need an adapter and a custom dump Edited May 17, 2015 by Missileman Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535281 Share on other sites More sharing options...
R_34 Posted May 17, 2015 Share Posted May 17, 2015 This is the cropped GT30 turbine wheel not the real gt30 one. It may perform anyway as the compressors is not that big. I have the kinugawa version with much bigger turbine (garrett stage 3 wheel which is 65mm at the inducer), and a 20g compressor (52.5/68mm wheel). With an EBC in good working order I was able to get 19 psi/1.3b at 4000rpm, without EBC I only get 14psi/0.9b at the same rpm and the engine doesn't relly wake up before 3500/3800rpm with a front facing plenum. It was able to give 198rwkw/320 Nm at this boost through a standard S13 airbox and paper filter in it, FMIC, front facing plenum and 3 inch turboback. This mambatek will spool fairly quicker maybe not as quick as you'd want, power wise I've no ideas but it will be able to break the 250 rwkw I guess. In the same range of size sonic performance offers bolt-ons solutions based on the GT2860RS and GTX2860/2863/2867 but it ain't cheap. Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535294 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 too much hassle to get an adaptor and custom dump honestly, i've seen the range sonic performance offers and its probably a bit too much for me price wise, R_34 is your rear housing a 10cm or 8cm? Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535324 Share on other sites More sharing options...
Missileman Posted May 17, 2015 Share Posted May 17, 2015 so wait six months, as Hypergear is investing in a 32gtst and developing turbos for the rb20... it might not make 20psi by 3000, but will be pretty good Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535329 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 i can deal with it being at full boost by 3500, put a boost guage in recently and turns out my rb25 turbo is hitting 12psi by about 3400 and 7 at 2800 so that was a bad call on my part, sounds interesting, need some supporting mods before i get my turbo anyway so if i havnt gotten a turbo before 6 months i'll have a look at that too, the only thing putting me off this mamba turbo is the 10cm turbine housing Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535347 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 there is another version with a slightly smaller comp wheel, gtx3063r 47.1/63 trim 56, all other specs are the same Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535354 Share on other sites More sharing options...
Missileman Posted May 17, 2015 Share Posted May 17, 2015 and what does your 25 turbo do at 6000, is it still holding 12psi? My SS2.5 hyflow makes positive boost @ 2.8K and 20psi @ 3.8 and keeps it to 7500rpm Not sure what kilowatts it make as I tune it myself all my passengers have a big grin @ 4000 Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535355 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 yeah it holds 12psi up to 6 although beyond that i tend not to look at the boost gauge and at the road, thats pretty good although personally i'd like positive boost at 2.5 or less Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535360 Share on other sites More sharing options...
Missileman Posted May 17, 2015 Share Posted May 17, 2015 brakes, anti-roll bars, nistune, injectors, Z32 AFM, and intercooler, turbo and tune should be the last thing you buy Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535363 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 im already aware of the supporting mods i need, thanks anyway though Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535367 Share on other sites More sharing options...
Missileman Posted May 17, 2015 Share Posted May 17, 2015 ...and if it still has the stock fuel pump, then that should be the first thing you change, the rest is in order as posted above. Mike. Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535368 Share on other sites More sharing options...
Missileman Posted May 17, 2015 Share Posted May 17, 2015 (edited) blah blah blah put in exhaust between Nistune and Injectors. Edited May 17, 2015 by Missileman Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535371 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 all thats left is nistune, turbo, z32 afm and injectors, have everything else, hardest part is selecting the right turbo really Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535381 Share on other sites More sharing options...
R_34 Posted May 17, 2015 Share Posted May 17, 2015 Mine is a 10cm², and it holds boost perfectly all the way to the rev limiter à 8200rpm when I was running 19psi. I backed off because of the EBC and the gearbox which didn't liked the "high" boost. Positive pressure begin in the low 2K but the turbo is lazy to gain boost and doesn't hit 0.5b before 3000 rpm with the ebc and 3500 without. Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535383 Share on other sites More sharing options...
sama1500 Posted May 17, 2015 Author Share Posted May 17, 2015 going by what you're saying the mamba turbo should spool faster than your kinugawa turbo with the smaller wheels and being ball bearing, if the housings are the same size it shouldnt be a problem for me then Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535387 Share on other sites More sharing options...
Missileman Posted May 17, 2015 Share Posted May 17, 2015 Often a tuner will supply and instal a Nistune and tune the car as a package deal, so that can be the last pieces in the sporting mads lineup. Link to comment https://www.sau.com.au/forums/topic/455028-rb20det-minor-performance-upgrades-update-turbo-selection/page/6/#findComment-7535391 Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now