Jump to content
SAU Community

Recommended Posts

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

  • Like 1
Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/
Share on other sites

The $ rules, but if it is staying stock , why not a stock or re build, they seem pretty tough or any quality single plate.

If you are going to wind it up later , I find the Nismo Coppermix Twin C Spec great , take a lot of KWs and so easy to use, spend a bit more now and save some $s later :)

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502459
Share on other sites

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

I've had one of these in my GT St for 11 years,no complaints from me. :-)
Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502491
Share on other sites

The $ rules, but if it is staying stock , why not a stock or re build, they seem pretty tough or any quality single plate.

If you are going to wind it up later , I find the Nismo Coppermix Twin C Spec great , take a lot of KWs and so easy to use, spend a bit more now and save some $s later :)

its only going to be stock for another month or there about, so i wanted something that can handle a bit of a power upgrade and still last a while.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502524
Share on other sites

Nismo copper mix Twin plate, standard or competition spec. Buy one and you won't regret it. NPC clutches are also good.

An Exedy Sports Tuff Clutch sounds shit and would get destroyed as soon as you start adding some power to your car.

Pay the money now for the right clutch as suggested or you'll be doing it more than once and that can be a costly procedure if you can't do them yourself.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502662
Share on other sites

I disagree,what mods are you going to do,exhaust and maybe a couple of others the sports tuff will work well.

Can handle 300 kw at the rears and still be a comfy daily drive,butt if you want say 500 at the rears go for one of the

hyper clutches. :-)

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502806
Share on other sites

hello everyone i was wondering as to what clutch i should put in my r33 gtr. i have recently bought this car and its now due for a major service as the clutch is on the way out i though now would be a good time to replace it.

i was looking at getting an exedy sports tuff clutch as i have heard

that they are good, keep in mind that my gtr is bone stock.

so would this be a good buy or is there something better on the market. :rolleyes:

If you're staying with stock power, and driving it normally, that clutch is fine. If you're going for more power or will be launching/clutch dumping it, it will be inadequate.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7502879
Share on other sites

Like I said before look into NPC clutches and the Nismo copper mix twin plate. Both are great and will last forever basically on 300kw with track days, providing you bed the clutch in properly.

If you search the forum you will see many people use these clutches and there are only positive reviews on their performance, feel and noise compared to many other clutches including stock.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503296
Share on other sites

Like I said before look into NPC clutches and the Nismo copper mix twin plate. Both are great and will last forever basically on 300kw with track days, providing you bed the clutch in properly.

If you search the forum you will see many people use these clutches and there are only positive reviews on their performance, feel and noise compared to many other clutches including stock.

Thanks ill have a look :cheers:

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503307
Share on other sites

I use the NPC 250mm organic single with 300kws and track days. But you don't launch at track days, so they're gentle on clutches. Its as easy to drive as the stock clutch. AFAIK the next step up from NPC is the carbotic, which will take more power and more punishment, but be a bit more difficult to drive. Since my GTR is no longer a daily, I would go for that now.

I think the Nismo coppermix twin recommendation is over the top for your use case, unless of course you have nothing better to do with the money.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503476
Share on other sites

NPC have good customer service so if you call them up they can help you out if you explain what you want exactly.

I agree the Nismo would probably be over the top but depends how deep your pockets are

unfortunately my pockets aren't that deep atm.

Link to comment
https://www.sau.com.au/forums/topic/455057-clutch-change/#findComment-7503815
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • For once a good news  It needed to be adjusted by that one nut and it is ok  At least something was easy But thank you very much for help. But a small issue is now(gearbox) that when the car is stationary you can hear "clinking" from gearbox so some of the bearing is 100% not that happy... It goes away once you push clutch so it is 100% gearbox. Just if you know...what that bearing could be? It sounding like "spun bearing" but it is louder.
    • Yeah, that's fine**. But the numbers you came up with are just wrong. Try it for yourself. Put in any voltage from the possible range and see what result you get. You get nonsense. ** When I say "fine", I mean, it's still shit. The very simple linear formula (slope & intercept) is shit for a sensor with a non-linear response. This is the curve, from your data above. Look at the CURVE! It's only really linear between about 30 and 90 °C. And if you used only that range to define a curve, it would be great. But you would go more and more wrong as you went to higher temps. And that is why the slope & intercept found when you use 50 and 150 as the end points is so bad halfway between those points. The real curve is a long way below the linear curve which just zips straight between the end points, like this one. You could probably use the same slope and a lower intercept, to move that straight line down, and spread the error out. But you would 5-10°C off in a lot of places. You'd need to say what temperature range you really wanted to be most right - say, 100 to 130, and plop the line closest to teh real curve in that region, which would make it quite wrong down at the lower temperatures. Let me just say that HPTuners are not being realistic in only allowing for a simple linear curve. 
    • I feel I should re-iterate. The above picture is the only option available in the software and the blurb from HP Tuners I quoted earlier is the only way to add data to it and that's the description they offer as to how to figure it out. The only fields available is the blank box after (Input/ ) and the box right before = Output. Those are the only numbers that can be entered.
    • No, your formula is arse backwards. Mine is totally different to yours, and is the one I said was bang on at 50 and 150. I'll put your data into Excel (actually it already is, chart it and fit a linear fit to it, aiming to make it evenly wrong across the whole span. But not now. Other things to do first.
    • God damnit. The only option I actually have in the software is the one that is screenshotted. I am glad that I at least got it right... for those two points. Would it actually change anything if I chose/used 80C and 120C as the two points instead? My brain wants to imagine the formula put into HPtuners would be the same equation, otherwise none of this makes sense to me, unless: 1) The formula you put into VCM Scanner/HPTuners is always linear 2) The two points/input pairs are only arbitrary to choose (as the documentation implies) IF the actual scaling of the sensor is linear. then 3) If the scaling is not linear, the two points you choose matter a great deal, because the formula will draw a line between those two points only.
×
×
  • Create New...