Jump to content
SAU Community

Recommended Posts

kewl,

i ringing around 2 day 2 find suumwere that will do it 4 me...grrr y do i have 2 live in the middle of no-were were there is now import workshops......but until i kan get it sumwere....here is the complete list of wat my car has......an wat its doing now

  • Replies 130
  • Created
  • Last Reply

Top Posters In This Topic

Nissan skyline r33, gts-t, hi-flow turbo, 2.5 Ltr 6 cyl, 1994, metallic black, 5 speed manual, 92000kms, stock intercooler, full 3" exhaust from turbo, GTR rear wing, front and rear strut-braces, 17" light weight rims, HKS pod filter, Apexi turbo-timer, adj. electronic in-cabin boost controller, boost gauge, lowered adj. suspension..........

HERE"S wat is happening.........

soon as i start the car it seems fine.....touch the throttle an it looks like theres a bush fire in my exaust tonnes an tonnes of whity grey smoke pours out......turbo still comes on boost.....no knocks or noises at all in the motor or newere on the car......oil is ALL through the piping on the engine side of the turbo......an i mean LOTS OF OIL......there is no smoke or any vapour under the oil filler cap nor any milky build up newere.....the only place i can c oil is leaking out of is were the BOV is meant 2 b.....so would b coming out the BOV if i had 1 there.....that is all i kan tell u at the moment from wat i have cheked.........

hope this can help sum ppl with trying 2 diagnose my car

Its dead easy to diagnose and you've been told a few times in this thread. Get a compression test done. Any mechanic can do it.

If your compression is down your engine is stuffed. Then you get a leakdown test to work out if its the pistons and rings or if its the head. Then you start saving.

If the compression is OK its almost certainly your turbo, get it taken off and inspected by someone who knows turbos.

But don't keep asking for help and then ignoring when ppl give you the right answer.

From a very similar experience, Number 6 Cylinder, ring lands are on their way out.. It will only be a matter of time until you put a hole through the piston its self and then its a new set of pistons job....

If you do a compression test it will still have compression in the cylinder, but may be a little less then the others. It will be number 6 cylinder that will go first. So see if you can do a check on it, but it will eventually get worse depending on, If you bring it on boost a lot.

thanx ppl's....

ohh an im not inoring ne1 if i was inoring u then would i be busy at the moment trying 2 find a mechanic 2 do these test 4 me asap..??? neway thanx 4 the advice........BBQ so wat u r saying is even if it is the ringlands on 6 an i get that fixed then sooner or l8r that no.6 is gonna go neway..????

COSTS INVOLVED IN A REBUILD:

---------------------------------------------------------------------

Remove and Replace engine - $1500

Labour to strip down and rebuild motor - $1500-2000

Head service - $600

Miscellaneous gaskets, oils, etc etc - $500

---------------------------------------------------------------------

Forged pistons - $900 -> $3000

It should cost anywhere from about $4000 upwards to do a proper engine rebuild, not including any upgraded parts like forged pistons, rod bolts, etc etc... Add those to the rebuild cost.

She's only a lowly paralegal, but she's got GREAT legs :D

Does it cost a lot more to R&R an RB26? They're the prices I'm working off that I was quoted from 3 workshops here in Sydney to R&R my RB26... I wouldn't have thought an RB25 would be that different? dunno.gif

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I drive the Tiguan much harder than the Skyline in all conditions, because it just grips and hooks, unlike the R33 shit box
    • The rain is the best time to push to the edge of the grip limit. Water lubrication reduces the consumption of rubber without reducing the fun. I take pleasure in driving around the outside of numpties in Audis, WRXs, BRZs, etc, because they get all worried in the wet. They warm up faster than the engine oil does.
    • When they're dead cold, and in the wet, they're not very fun. RE003 are alright, they do harden very quickly and turn into literally $50 Pace tyres.
    • Yeah, I thought that Reedy's video was quite good because he compared old and new (as in, well used and quite new) AD09s, with what is generally considered to be the fast Yokohama in this category (ie, sporty road/track tyres) and a tyre that people might be able to use to extend the comparo out into the space of more expensive European tyres, being the Cup 2. No-one would ever agree that the Cup 2 is a poor tyre - many would suggest that it is close to the very top of the category. And, for them all to come out so close to each other, and for the cheaper tyre in the test to do so well against the others, in some cases being even faster, shows that (good, non-linglong) tyres are reaching a plateau in terms of how good they can get, and they're all sitting on that same plateau. Anyway, on the AD08R, AD09, RS4 that I've had on the car in recent years, I've never had a problem in the cold and wet. SA gets down to 0-10°C in winter. Not so often, but it was only 4°C when I got in the car this morning. Once the tyres are warm (ie, after about 2km), you can start to lay into them. I've never aquaplaned or suffered serious off-corner understeer or anything like that in the wet, that I would not have expected to happen with a more normal tyre. I had some RE003s, and they were shit in the dry, shit in the wet, shit everywhere. I would rate the RS4 and AD0x as being more trustworthy in the wet, once the rubber is warm. Bridgestone should be ashamed of the RE003.
    • This is why I gave the disclaimer about how I drive in the wet which I feel is pretty important. I have heard people think RS4's are horrible in the rain, but I have this feeling they must be driving (or attempting to drive) anywhere close to the grip limit. I legitimately drive at the speed limit/below speed the limit 100% of the time in the rain. More than happy to just commute along at 50kmh behind a train of cars in 5th gear etc. I do agree with you with regards to the temp and the 'quality' of the tyre Dose. Most UHP tyres aren't even up to temperature on the road anyway, even when going mad initial D canyon carving. It would be interesting to see a not-up-to-temp UHP tyre compared against a mere... normal...HP tyre at these temperatures. I don't think you're (or me in this case) is actually picking up grip with an RS4/AD09 on the road relative to something like a RE003 because the RS4/AD09 is not up to temp and the RE003 is closer to it's optimal operating window.
×
×
  • Create New...