Jump to content
SAU Community

V36 Custom Grille Emblem

mycarhasposessedme
 Share

Recommended Posts

mycarhasposessedme Community Regular

mycarhasposessedme

Posted
Posted

Hey Guys, Always hated the big Hamburger on the front of my 370GT.

Swapping to Infiniti badging doesn't appeal to me either.

So, I did this.

Basically I modified the Nissan Hamburger.

20150418_172750_zpsykuf6n3j.jpg

20150418_172710_zpsgb3urvgy.jpg

20150418_172834_zpsjc56ffel.jpg

I used a boot emblem & stacked it.

Cheers.

Link to comment
https://www.sau.com.au/forums/topic/455833-v36-custom-grille-emblem/
Share on other sites
Guest

Guest

Posted
Posted (edited)

Yes, I do to,

was actually tossing up between emblem less & modding the Emblem..

Great work modding the emblem. In my opinion I would stick with the Nissan / Infiti logo or have no emblem at all... Your car is stunning and I feel this custom emblem devalues it by "tarting it up" unnecessarily...

Edited by Sikahalv
mycarhasposessedme Community Regular

mycarhasposessedme

Posted
  • Author
Posted

Part of the reason for modding just the emblem was its 100% reversible.

As it stands, the grille is coated in Plastidip, easy peel off & back to chrome.

Emblem is in Epoxy, but is a simple replace with a new Nissan item.

You'd be surprised how good it looks in the flesh btw.

The alternative of going emblem less (which I was also tossing up between) is not reversible however, as it involves fiberglassing in the missing sections of grille from behind the badge.

Just something different, might keep it like this for a while, or maybe not, we'll see.

Unfortunately I'm cursed with a big dislike of the original grille emblem & dont particularly care for the toffy nosed infiniti badging.

Imo even a grille with a hole in it would be preferable.

Cheers.

BurtoN86 Community Regular

BurtoN86

Posted
Posted

There is a US website that made customer grilles, lips, spoilers, etc for G35/G37's.. I can't remember for the life of me what it was right now.. but if I come across it again I'll post it up in here..

Perhaps someone else may know the site I'm talking about (not outcast btw), they do a lot of carbon stuff as well (pricey, but look to be good quality).

Anyway I'll get back to you if I find it again :)

mycarhasposessedme Community Regular

mycarhasposessedme

Posted
  • Author
Posted (edited)

Here you go

http://www.bmcextremecustoms.net/20ingcog37gt.html

http://www.ilovebodykits.com/category/116/Infiniti-_G37-_2009/Exterior_Body-Styling_Grilles.html

Edited by mycarhasposessedme
  • 2 weeks later...
Bliksem Veteran

Bliksem

Posted
Posted

A grille with the skyline "S" logo like the older models wouldnt look bad in my opinion. Provided it wasn't overly large and gaudy looking...

bonnet_emblem.jpg

Either that or perhaps "Skyline" or 370GT located on the lower right hand side of the grille Hakosuka style

Tokyo-Nostalgic-Car-Show-2010-47-Skyline

mycarhasposessedme Community Regular

mycarhasposessedme

Posted
  • Author
Posted

After 3 weeks my modded emblem sh1ts me now.

Its just to friggin big.

Part of the problem with the hamburger originally was its obese size.

I like the idea of the 370gt on the side Bliksem.

When I get a chance I'll re-do it as emblem-less & maybe try a side emblem.

All good fun.

Cheers.

mkn23 Collaborator

mkn23

Posted
Posted

yeah if you could do an embless-less grille, i'll debadge my whole car and not worry about this half half infiniti nissan badging i got going on lol

After 3 weeks my modded emblem sh1ts me now.

Its just to friggin big.

Part of the problem with the hamburger originally was its obese size.

I like the idea of the 370gt on the side Bliksem.

When I get a chance I'll re-do it as emblem-less & maybe try a side emblem.

All good fun.

Cheers.

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • RP1421
      S15 Spec R

      By RP1421 · Posted

      As discussed in the previous post, the bushes in the 110 needed replacing. I took this opportunity to replace the castor bushes, the front lower control arm, lower the car and get the alignment dialled in with new tyres. I took it down to Alignment Motorsports on the GC to get this work done and also get more out of the Shockworks as I felt like I wasn't getting the full use out of them.  To cut a very long story short, it ended up being the case the passenger side castor arm wouldn't accept the brand new bush as the sleeve had worn badly enough to the point you could push the new bush in by hand and completely through. Trying a pair of TRD bushes didn't fix the issue either (I had originally gone with Hardrace bushes). We needed to urgently source another castor arm, and thankfully this was sourced and the guys at the shop worked on my car until 7pm on a Saturday to get everything done. The car rides a lot nicer now with the suspension dialled in properly. Lowered the car a little as well to suit the lower profile front tyres, and just bring the car down generally. Eternally thankful for the guys down at the shop to get the car sorted, we both pulled big favours from our contacts to get it done on the Saturday.  Also plugged in the new Stedi foglights into the S15, and even from a quick test in the garage I'm keen to see how they look out on the road. I had some concerns about the length of the LED body and whether it'd fit in the foglight housing but it's fine.  I've got a small window coming up next month where I'll likely get a little paint work done on the 110 to remove the rear wing, add a boot wing and roof wing, get the side skirt fixed up and colour match the little panel on the tail lights so that I can install some badges that I've kept in storage. I'm also tempted to put in a new pair of headlights on the 110.  Until then, here's some more pictures from Easter this year. 
    • joshuaho96
      R32 GTS (RB20DE) Injectors Replacement

      By joshuaho96 · Posted

      I would put a fuel pressure gauge between the filter and the fuel rail, see if it's maintaining good fuel pressure at idle going up to the point when it stalls. Do you see any strange behavior in commanded fuel leading up to the point when it stalls? You might have to start going through the service manual and doing a long list of sensor tests if it's not the fuel system for whatever reason.
    • perry_r33
      R34 GTR Vspec Garage Sale - All must go!

      By perry_r33 · Posted

      Pm sent 
    • Robot
      Skyline v36 350GT sedan hunting on idle

      By Robot · Posted

      Hi,  Just joined the forum so I could share my "fix" of this problem. Might be of use to someone. Had the same hunting at idle issue on my V36 with VQ35HR engine after swapping the engine because the original one got overheated.  While changing the engine I made the mistake of cleaning the throttle bodies and tried all the tricks i could find to do a throttle relearn with no luck. Gave in and took it to a shop and they couldn't sort it. Then took it to my local Nissan dealership and they couldn't get it to idle properly. They said I'd need to replace the throttle bodies and the ecu probably costing more than the car is worth. So I had the idea of replacing the carbon I cleaned out with a thin layer of super glue and it's back to normal idle now. Bit rough but saved the car from the wreckers 🤣
    • GabsReDeal
      R32 GTS (RB20DE) Injectors Replacement

      By GabsReDeal · Posted

      After my last update, I went ahead with cleaning and restoring the entire fuel system. This included removing the tank and cleaning it with the Beyond Balistics solution, power washing it multiple times, drying it thoroughly, rinsing with IPA, drying again with heat gun and compressed air. Also, cleaning out the lines, fuel rail, and replacing the fuel pump with an OEM-style one. During the cleaning process, I replaced several hoses - including the breather hose on the fuel tank, which turned out to be the cause of the earlier fuel leak. This is what the old fuel filter looked like: Fuel tank before cleaning: Dirty Fuel Tank.mp4   Fuel tank after cleaning (some staining remains): Clean Fuel Tank.mp4 Both the OEM 270cc and new DeatschWerks 550cc injectors were cleaned professionally by a shop. Before reassembling everything, I tested the fuel flow by running the pump output into a container at the fuel filter location - flow looked good. I then fitted the new fuel filter and reassembled the rest of the system. Fuel Flow Test.mp4 Test 1 - 550cc injectors Ran the new fuel pump with its supplied diagonal strainer (different from OEM’s flat strainer) and my 550cc injectors using the same resized-injector map I had successfully used before. At first, it idled roughly and stalled when I applied throttle. Checked the spark plugs and found that they were fouled with carbon (likely from the earlier overly rich running when the injectors were clogged). After cleaning the plugs, the car started fine. However, it would only idle for 30–60 seconds before stalling, and while driving it would feel like a “fuel cut” after a few seconds - though it wouldn’t fully stall. Test 2 – Strainer swap Suspecting the diagonal strainer might not be reaching the tank bottom, I swapped it for the original flat strainer and filled the tank with ~45L of fuel. The issue persisted exactly the same. Test 3 – OEM injectors To eliminate tuning variables, I reinstalled the OEM 270cc injectors and reverted to the original map. Cleaned the spark plugs again just in-case. The stalling and “fuel cut” still remained.   At this stage, I suspect an intermittent power or connection fault at the fuel pump hanger, caused during the cleaning process. This has led me to look into getting Frenchy’s fuel hanger and replacing the unit entirely. TL;DR: Cleaned and restored the fuel system (tank, lines, rail, pump). Tested 550cc injectors with the same resized-injector map as before, but the car stalls at idle and experiences what feels like “fuel cut” after a few seconds of driving. Swapped back to OEM injectors with original map to rule out tuning, but the issue persists. Now suspecting an intermittent power or connection fault at the fuel pump hanger, possibly cause by the cleaning process.  
×
×
  • Create New...