Jump to content
SAU Community

Recommended Posts

  • 3 weeks later...

getting ready to pull it off the road to paint.....

But before i do want all the body panels i need etc.

really REALLY struggling to find a gtr bonnet!!!!

If your getting it painted you could always get a fibreglass bonnet?

  • 2 months later...

Just a quickie update

Have since bought a gtr bonnet for the car. also sold the RPF1s and went, well bigger RPF1s!

18x 9.5 +20 and 18 x 10.5 +15

Also bought a gtr standard lip, some F1 style mirrors and roof spolier.

And from the current group buy, rear carbon under diffuser, canards and ab flug under lip thingo for the front.....

Have also decided on a yellow, which is the VE i think GTS / monaro Holden yellow. As you can see some mates thought it would be funny to paint strips and numbers etc

Im now in 2 minds to either get some over fenders for the rear or try and lip the rears by around 20mm, then camber. still deciding.

trying to find some GTR rear seats at the mo and ill get the gtr front and rears re covered....

12342871_10156337633815215_1878109601648

12670857_10156510557640215_1473669050132

12670322_10156510557585215_7573895374404

12644995_10156510557415215_1243511723405

12512794_10156444084365215_4651021102692

Hasnt been much done due to having bloody glandular fever!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • Hi...so a "development" here aswell The swap is "done" and car went "test drive" BUT it seems the clutch(maybe gearbox?) is a little bit sad? I bought this clutch kit https://justjap.com/products/xtreme-heavy-duty-organic-clutch-flywheel-kit-nissan-skyline-r31-r32-r33-push-type "Problem" is that the first gear is hard to put into and it seems that the clutch is not disengaged. It was not the problem with the old clutch...(or like sometime the first gear would not get as easy specialy when the fluid was cold) So? Can it be like...bad "install" or is the clutch wrong ((it should not have been) i done research to get the right one) Or is this "normal" with new clutch and needs to be break in? 
    • @Duncan I can try  and thanks i did not thought about VIN and part numbers for 33/34. @GTSBoy yeah it looks like iam gonna do that  
    • Forgot to include this but this is the mid section of my steering rack that looks like it has a thread/can be turned with that notch mentioned in the post:
    • Hey everyone, Wanted to pick some brains about this issue I'm having with rebuilding my 33 rack (PN is 49001-19U05). All of the tutorials/videos I've seen online are either R34 or S Chassis racks which seem to be pretty straightforward to disassemble but this process doesnt carry over to my rack. Few of the key differences that I've noted The pinion shaft on the other racks bolt on with 3 torx bolts: Whereas my rack bolts on with 2 allen head bolts: These changes are pretty inconsequential but the main difference is how you pull the actual rack out of the housing. The other skyline/s chassis racks can be taken out by tapping the rack out of the body with a socket and it just slides right out. I'm unable to do that with my rack because there's a hard stop at the end that doesn't let the seal/shaft be tapped out. Can also see a difference in the other end of the rack where mine has a notch that looks like you're able to use a big wrench to unthread 2 halves of the rack whereas the other racks are just kinda set in with a punch. My rack: Other racks: TLDR; Wanted to know if anyone has rebuilt this specific model of steering rack for the R33 and if there were any steps to getting it done easier or if I should just give this to a professional to get done. Sorry if this post is a bit messy, first one I've done.
    • I would just put EBC back on the "I would not use their stuff" pile and move on.
×
×
  • Create New...