Jump to content
SAU Community

Recommended Posts

http://www.users.on.net/~goofyhsk/info/chassis_plate.html

You can use that as a guide on how to decode the plate and what each letter means. For that plate I have no idea what the last 3 letters mean. But seems like a Standard GTR that's imported.

If it was ADM or Nismo, etc you'd notice the letters would have a certain combination, etc.

BNR32002355 would indicate an early run from 1989. These are in demand in USA now.

Model# alphanumeric indicates what it came out of the factory with.

See if "Iron Chef Imports" might export it for you to the State, depending on its condition. In the USA he's known as Iron Block imports

You should have an import plate also as Terry said in addition to the build plate. Once a car is registered in Australia for the first time though the import plate doesn't have to be displayed either after that.

If in doubt you can always check the VIN number on Nissan Fast or something to confirm the status of the car.

Once the car is registered it will have all the compliance details attached to it as it's required.

Edited by breaker1845

lol the fact that he would have payed plenty for an aust delivered, if he didnt pay through the nose and some how ended up with one and never realized it... he would have won at life.

i have however wandered how much my 89gtr would be worth in the USofA this year....... just y'know.. wondered :)

It's gun metal grey so it's an import

Aussie ones only came in red, silver and black. Apart from a couple that were used as pace cars that momo did a few things to and they were green

Also if it was brought in under the 15 year rule (before it was changed) it won't have an Australian compliance plate

There is a thread for getting VIN's fasted you can post in if you don't mind waiting a day or so to get the results back.

Ghost posted the link earlier, just go to the last page and add the VIN you want fasted I guess. Should provide most of the details.

If the car is currently registered in a state you can also go to the state government website and do a quick check with the VIN for details regarding compliance and security for free or a small fee usually.

Edited by breaker1845

almost no need to fast bud. we practically share vins.

post-60068-0-78905100-1432083207.jpg
20150201_173054_zpswudvduj6.jpg

K: Coupe

B: 2.6L (GTR)

N: Super Hicas + Attessa

R32: 8th Generation Skyline
R: 2 Doors

X: GTR (16 Inch Wheels)

F: 5 Speed Manual
S: Intercooler + Turbo + EGI
L: Fog Lights

then it gets choppy...

mzg

GH05T, on 03 Feb 2015 - 09:51 AM, said:snapback.png

ok more research shows allot of conflicting info

M: Limited slip diff/ rear wiper less (which i have) ???

Z: Cold weather pack/ early n1 spec ???

G: still nothing

GH05T, on 03 Feb 2015 - 10:41 AM, said:snapback.png

so more info suggests the following

M = P+Q (Climate control + upgraded sound)

Z = Cold pack? heated side rear view mirrors

G = B+D (ABS + Visc LSD)

still unsure as M states elsewhere about the wiperless windscreen which i do have.


never found out for sure.
.... but yours has a rear wiper, mine did not. otherwise almost identical base cars.

Edited by GH05T
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • I have done a lot of research before posting here and on gtruk forum. couldn't find anything. I have my gauges all part except the needle itself. the needle has a extremely small hole in the center, but the shaft going to the needle is extremely small and appears to have nothing to index it either. doesn't seem strong enough to simple pry or pull without damaging something. Already tried the old spoon trick on a extra triple meter I have from a gtt, but no luck. the center cap comes off easily but the hole in the meter face plate aren't big enough to get over the needle itself. figured this would be my best place to find someone who might have actually removed theirs. wonder if there is some type of small pin press tool to push the pin in while pulling the needle base off.
    • Ok...its taking me long enough to finally do this.  Feck financial security...heart disease will get me soon enough anyway So welcome to the garage..."Clem" Belsil80 has been running a 370Z in Super TT series. So after entering with him in last years Winton 300 i figured I  need my own car. Seems SAU Vic race cars need to be yellow....{tick} Reckon with enough motor i will be able to make up for the lack of talent and stay ahead of the 370Z... but the LS powered S13 and E36s are a ways up the road Aim is to have a car that doesnt stop or turn but has a bit of shed built motor with jam...maybe some cream  First step is getting this ex drift car log booked I am keeping faithful silver car. As the road-club car gets upgrades the race car wil get the sloppy seconds
    • Assuming that they will come off without damage at all.... i would have thought just pull straight up off the spindle with a something or other than can reach underneath. Have you searched for youtube vids of people doing similar on R34s or any other Nissan from the same vintage? They should be the same technique, in all likelihhood.
    • Keeping in mind that sandblasting is really aggressive on softer metals like cast alloy, and you can do damage that you might regret. For trash wheels, not a problem. For wheels with value/scarcity issues, etc.... perhaps a less aggressive media is a better choice?
    • Don't get all high and mighty. Experienced spanner wielders know exactly what effort is required to release an Oof.
×
×
  • Create New...