Jump to content
SAU Community

Recommended Posts

  • 9 years later...

Thread revival, apologies!

I have a similar issue, strange noise that appears shortly after starting the car, fluctuates a bit with RPM... If you bring the revs up the noise sort of follows / trails behind and then settles if that makes sense?

Engine was built years ago with CAMTECH 268 Cams (9mm lift i believe) and the rest of the upgrade kit with the springs and retainers.

Can you upgrade the pulley itself, if the spring is too weak (same as on the VG30 Lumps) or is it pointing towards another issue?

 

Cheers!

  • 3 weeks later...

Got them measured (better late than never) 

They seem to be the "wrong way around" IE Tighter on inlet and slacker on exhaust which I believe is actually the opposite to the norm on an RB? They're not perfect but am I right in saying they're not horrendous? I can't find the specs to suit the exact camtech cams anymore so using OEM and Other aftermarket specs they don't seem bad?

Put a video on to show. Using a stethoscope the noise doesn't seem to be focused around one area.

 

Worth noting the car has probably done 6000miles like this and it's never ever changed nor struggled to make power etc.

I'm a bit stumped!

 

IMG20241025195733.jpg

Those numbers aren't terrible.

Another question, do you have an aluminium plenum? You could just be hearing the solid head a bit more because of that.

I know when I went from the stock intake manifold to an aftermarket intake manifold/plenum, everything became louder.

Injectors, lifters, became more audible.

11 hours ago, GTSBoy said:

Doesn't seem like it should cause them to be too noisy. Circa 0.4 is on the wider end of the range though. You can probably target more like 0.3 on the inlets.

Yeah that's exactly my thoughts but I'm far from an expert. Video didn't upload so will get it on YouTube and share the link. Thanks mate.

10 hours ago, Dose Pipe Sutututu said:

Those numbers aren't terrible.

Another question, do you have an aluminium plenum? You could just be hearing the solid head a bit more because of that.

I know when I went from the stock intake manifold to an aftermarket intake manifold/plenum, everything became louder.

Injectors, lifters, became more audible.

Yeah as above really they're not horrible numbers are they! 

And it's on a greddy inlet. Has ID1050x that are quite noisy but tbh it did this on the older injectors. Lots of noise comes from the injector rail too.

56 minutes ago, Toff said:

Thanks for that, it actually sounds fine to me.

What oil weight are you running and what kind of oil pressure do you see around idle RPM and a bit over it?

I'm going to vote for considering going to the effort to close the lash down to the minimum. My bro-in-law got around to checking the clearances on the 3SGE in his Caldina. Was a bit fat all over. New shims at lowest allowable lash, and the car is remarkably better to drive. It appears that the increase in both total lift and duration that you get from doing this is worth a lot more than you might expect.

I have been having evil (and expensive and time consuming) thoughts about doing it to mine, and I don't even think I have a problem. Not that I'd know, though.

On 10/26/2024 at 1:01 PM, Dose Pipe Sutututu said:

Thanks for that, it actually sounds fine to me.

What oil weight are you running and what kind of oil pressure do you see around idle RPM and a bit over it?

Yeah most people that have heard it said it was fine but it's always had me slightly worried.

Oil pressure I can't remember off the top of my head but it has plenty, I run 10w60

On 10/26/2024 at 1:04 PM, GTSBoy said:

I'm going to vote for considering going to the effort to close the lash down to the minimum. My bro-in-law got around to checking the clearances on the 3SGE in his Caldina. Was a bit fat all over. New shims at lowest allowable lash, and the car is remarkably better to drive. It appears that the increase in both total lift and duration that you get from doing this is worth a lot more than you might expect.

I have been having evil (and expensive and time consuming) thoughts about doing it to mine, and I don't even think I have a problem. Not that I'd know, though.

You're probably right mate, best get ordering some shims!

Guessing Nissan is the best place for them?

7 hours ago, Toff said:

Guessing Nissan is the best place for them?

I dunno. Maybe. There's a crowd here in Oz called Precision Shims that I'd probably look to first. Although NIssan might be surprisingly cheap enough.

Trouble with the process is you have to take all the existing shims out to measure them to know what you need to order.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now



  • Similar Content

  • Latest Posts

    • I got back to Japan in January and was keen to get back on track as quickly as possible. Europe is god-awful for track accessibility (by comparison), so I picked up a first-gen GT86 in December just to have something I could jump into right away. The Skyline came over in a container this time and landed in early January. It was a bit battered after Europe, though—I refused to do anything beyond essential upkeep while it was over there. The clutch master cylinder gave out, and so did the power steering. I didn’t even bother changing the oil; it was the same stuff that went in just before I left Japan the first time. Naughty. Power steering parts would’ve cost double with shipping and taxes, so knowing I’d be heading back to Japan, I just postponed it and powered through the arm workout. It took a solid three months to get the car back on the road. Registration was a nightmare this time around. There were a bunch of BS fees to navigate, and sourcing parts was a headache. I needed stock seats for shaken, mistakenly blew 34k JPY on some ENR34 seats—which, of course, didn’t fit—then ended up having the car’s technical sheet amended to register it as a two-seater with the Brides. Then there’s the GT86. Amazing car. Does everything I want it to do. Parts are cheap, easy to find, and I don’t care what anyone says—it’s super rewarding to drive. I’ve done a few basic mods: diff ratio, coilovers, discs, pads, seat, etc. It already had a new exhaust manifold and the 180kph limiter removed, so I assume it’s running some kind of map. I’ve just been thrashing it at the track non-stop—mostly Fuji Speedway now, since I need something with higher speed after all that autobahn time. The wheels on the R34 always pissed me off—too big, and it was a nightmare getting tires to fit properly under the arches. So I threw in the towel and bought something that fits better. Looks way cleaner too (at least to me)—less hotboy, less attention-seeking. Still an R34, though. Now for future plans. There are a few things still outstanding with the car. First up, the rear subframe needs an overhaul—that’s priority one. Next, I need to figure out an engine rebuild plan. No timeline yet, but I want to keep it economical—not cutting corners, just not throwing tens of thousands at a mechanic I can barely communicate with. And finally, paint. Plus a bit of tidying up here and there.  
    • Nope, needed to clearance under the bar a little with a heat gun, a 1/2" extension as the "clearancer", and big hammer, I was aware of this from the onset, they fit a 2.0 with this intake no problems, but, the 2.5 is around 15mm taller than a 2.0, so "clearancing" was required  It "just" touched when test fitting, now, I have about 10mm of clearance  You cannot see where it was done, and so far, there's no contact when giving it the beans Happy days
    • It's been a while since I've updated this thread. The last year (and some) has been very hectic. In the second-half of 2024 I took the R34 on a trip through Germany, Italy, France and Switzerland - it was f*cking great. I got a little annoyed with the attention the car was getting around Europe and really didn't drive it that much. I could barely work on the car since I was living in an inner-city apartment (with underground parking). During the trip, the car lost power steering in France - split hose - and I ended up driving around 4,000kms with no power steering.  There were a few Nurburgring trips here and there, but in total the R34 amassed just shy of 7,000kms on European roads. Long story short, I broke up with the reason I was transferred to Europe for and requested to be moved back to Japan. The E90, loved it. It was a sunk cost of around EUR 10,000 and I sold it to a friend for EUR 1,500 just to get rid of it quickly. Trust me, moving countries f*cking sucks and I could not be bothered to be as methodical as I was the first time around.
    • I assume clearances were all a-okay?
    • Shock tower brace is in +5Kw....LOL  
×
×
  • Create New...