Jump to content
SAU Community

Replacement For 370gt Windscreen Wipers ?

phynicle
 Share

Recommended Posts

mycarhasposessedme Community Regular

mycarhasposessedme

Posted
Posted

Max, I called you an arsehole because you were rude & arrogant.

your post consisted of a collection of condescending assumptions about the op.

Thinly veiled insults to myself & then finished by singling out a grammatical error on my behalf in an attempt to belittle me.

May I ask your motivation for this, were you trying to demonstrate to everyone here your superior grasp of the English language, or indeed simply being as I so immaturely put it, an arsehole?

You want a friendly environment? Show me that you can feed yourself and don't need me to chew it for you and spit it down your throat like an infant bird. I don't equate friendly with laziness.

It seems to me it would be fairly hard to meet your varied demands with just a single post containing a question. Who knows, maybe a second post would have gotten him/her across the line with you.

Without knowing the op's personal situation all you are doing is jumping to baseless conclusions.

Some of us prefer to teach people a little about self-sufficiency (or self-virtuosity as one of my lecturers called it in engineering).

So this is the justification for your abhorrent behavior, you thought you'd teach the op a lesson for his/her own good.

So, let's just agree that you think Ben and I are arseholes, while I think that you and mycarhaspossessedme need to come out of your bubble of sensitivity and give people that nudge in the right direction

Your incorrect, I never called Ben an arsehole, that was directed firmly & squarely at you only & I do apologize for my immaturity & vulgarness :yes: now that was for Ben.

I assure you I do not live in a bubble of sensitivity, quite the opposite actually.

I find it quite interesting that people full of their own self importance see themselves as being responsible to, as you put it, "Give people that nudge in the right direction", its a great universal banner to put over pretty much any insults you dish out & quite a common theme among certain personality types.

Look, I'll make it easy for you.

You are important,

You are intelligent

People should seek your approval

You wield a very powerful sword here on SAU.

Now, please I beg you, try to show just a little patience with newbie posters.

Who knows, you could turn out to be great friends.

  • Like 1
  • Replies 59
  • Created
  • Last Reply

Top Posters In This Topic

Popular Days

Top Posters In This Topic

Popular Days

Popular Posts

junkie
junkie

google search for "370gt wipers" page 2 of search results: http://www.sinergymotorsports.com.au/cart/products-page/nissan-skyline-v36/ bottom of the page are compatible wiper blades, oz supplier, rea

niZmO_Man
niZmO_Man

It was a generalised statement of the trend these days. Posters (on forums and Facebook), regardless of age, seem to have become quite lazy over the years. SAU is a good example of this. Lots of new t

Ben C34
Ben C34

Have you tried going to a shop and having a look?

Guest

Guest

Posted
Posted (edited)

...Maybe your lesson in mastery could be to let the posts go rather than commenting negatively. You both appear to be intelligent men; which makes me wonder why you bother writing the stuff you have in the first place.

But yes, let's agree to disagree and hopefully we see the validity in each other's arguments.

Well said.

Edited by Sikahalv
Rhinorebel Grand Master

Rhinorebel

Posted
Posted

I purchased replacement wiper blades from Autobarn and while they work just fine, the mounting clip on the driver's side is reversed and offsets the wiper slightly from it's original position. No biggie, but there it is.

I hope my post has not offended anyone...

  • Like 1
The Max Mentor

The Max

Posted
Posted

May I ask your motivation for this, were you trying to demonstrate to everyone here your superior grasp of the English language, or indeed simply being as I so immaturely put it, an arsehole?

I'm simply a grammar Nazi. I do it to absolutely everyone all because I value the importance of good communication skills and I believe it's dwindling over time, which genuinely concerns me. If that leaves you feeling I'm trying to demonstrate some kind of superiority, well, that's your opinion.

It seems to me it would be fairly hard to meet your varied demands... Without knowing the op's personal situation all you are doing is jumping to baseless conclusions.

What personal situation prevents someone from walking into a shop? I'm not all that difficult. You just believe it to be the case.

So this is the justification for your abhorrent behavior, you thought you'd teach the op a lesson for his/her own good.

As above, yes. If that's abhorrent behaviour, then so be it so long as something good comes out of it.

Your incorrect

"You're"

I find it quite interesting that people full of their own self importance see themselves as being responsible to, as you put it, "Give people that nudge in the right direction", its a great universal banner to put over pretty much any insults you dish out & quite a common theme among certain personality types.

If my efforts are insulting rather than inspiring in any way, that's the other individual's problem. I don't believe I have a sledgehammer approach but I don't sugarcoat anything either. Seems to be all the rage these days, being sensitive and politically correct. Don't like it? Harden up a little. You must've hated your stern teachers in school.

Look, I'll make it easy for you.

You are important,

Just another contributor in the world.

You are intelligent

Simply passing on knowledge as humans have done over several millennia.

People should seek your approval

People should seek what humans have always sought for through the course of evolution - skills, knowledge and common sense.

You wield a very powerful sword here on SAU.

No dirty talk, please.

Now, please I beg you, try to show just a little patience with newbie posters.

Who knows, you could turn out to be great friends.

Goes against what I've been arguing this time. Besides which, I have plenty friends.

  • Like 1
Ben C34 Grand Master

Ben C34

Posted
Posted

Wow, this thread has turned into a personal growth thread!

We can all get something out of it..

Here's another story.

Yesterday, whilst at work so it technically not my time I was wasting, I was googling away to find part numbers for diff axle seals ( for another car).

Couldn't find the side seals in non genuine , only for the pinion. Genuine prices were silly. Went to shop to buy pinion seal, had a brainwave. Asked guy about side seals. He looks in his book and I buy them 30 seconds later. Spent way more time than that looking for the numbers myself for no benefit at all.

Need simple car stuff. Just go to a shop and ask them!

Nod089 Enthusiast

Nod089

Posted
Posted

Heheh. Yep. Good to see someone actually read Ben's story. :P

Hehehehehe. [emoji38][emoji38][emoji4][emoji4][emoji4][emoji4][emoji4][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji23][emoji38][emoji38][emoji38][emoji38][emoji38][emoji16][emoji16][emoji16][emoji16][emoji16][emoji16][emoji16]

Oh stop it!

  • Like 1
niZmO_Man Grand Master

niZmO_Man

Posted
Posted

He did search.

Wouldn't call signing up to a forum 'tonnes easier'

It was a generalised statement of the trend these days. Posters (on forums and Facebook), regardless of age, seem to have become quite lazy over the years.

SAU is a good example of this. Lots of new threads with easily answerable questions if searched beforehand. The time it took for them to sign up (no problems with that) and create a new thread, they could have Googled/Binged/Duckduckgoed the answer(s).

BTW I didn't read the 'heated exchanges', I just thought "fight fight fight" :P.

  • Like 2
  • 1 year later...
The Max Mentor

The Max

Posted
Posted

Apologies for the thread resurrection but I thought I'd offer a little insight as it hasn't been mentioned here before.

I read through a number of reviews and forums that the Bosch Icon and Aerotwin are two different beasts, with the Icon being the better one, particularly for longevity. Only thing is, it seems to be exclusively a North American product.

The problem with that, if it is an actual problem, is that the aerodynamic profile will sit upside down on our vehicles.

So, in the name of science, I bought a 24A and 17B for mine off eBay and mounted them today with that expected upside down result.

Now to wait for rain during a high speed drive to see if that will be to my detriment or not.

The Max Mentor

The Max

Posted
Posted

To be fair, my OEM ones have lasted for five years. I can't really complain but then again, that's largely because it's off the road around five months in every 1.5 years. Still, if the rubber can last even longer, why not?

Like I said, this is in the name of science. If they give me the same longevity, then I won't bother importing in future, depending on what changes with the product in another five years' time. :)

talkiet Enthusiast

talkiet

Posted
Posted

Needle nose pliers to pull the old ones out and the new ones just slid in - the end of the wiper assemblies are bendy (for me) and got far enough out of the way for me to get the steel bars slotted in... After that it was just sliding them fully in

 

Cheer s-N

The Max Mentor

The Max

Posted
Posted

Nice. Looking at mine, which I'm guessing are still OEM, the rubber surround felt too fragile for that.

Just threw on a set of Trico Ultra blades on the shitbox BA Falcon. Not bad but they're no Bosch Icon. Those passed the high speed test last night on the freeway. I might still flip the housings around eventually, just because of my OCD.

  • 1 year later...
v36skyline2007 Rookie

v36skyline2007

Posted
Posted

Here is the technical service bulletin with the part number for the factory wiper blades and also instructions of how to install:

http://www.infinitig37.com/TSB/1SC17.pdf

I realise this is an old thread, but thought it may benefit those using the search function.

 

The Max Mentor

The Max

Posted
Posted

Well, since you brought it up, I'll update my post about the Bosch Icon blade I imported from the US. I haven't bothered to reverse the housings. I've left them as is and they're doing great after two years. When the time comes, screw OEM, I'm sticking with Bosch Icon.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing


  • Similar Content

  • Latest Posts

    • pacman_1219
      Blue/grey smoke after idle

      By pacman_1219 · Posted

      Even with the piston at TDC there was room for it to drop, but I don't think it can drop fully into the cylinder, the problem you have is that you need something pushing against the valve to hold it up so you have enough room to put the new stem seal on and the spring etc.  I used compressed air only because putting rope in the cylinder seemed a bit risky to me, I know people have done it countless times before like this. Overall it's a pain in the ass job. Honestly you'd probably be better off taking the head off because the risk of dropping something in the engine and the finicky-ness of it all is very stressful. If you are going to attempt it though i 10000% recommend a 36050 valve spring/keeper tool. I had both the traditional lever type and after doing 1 cylinder it was absolute pain to get those valve keepers in place, even with 2 people. That 36050 is amazing, you do have to push hard to get them in place but it works perfectly almost every time. Back to my actual issue I think my engine is just tired and old and the rings have gone bad. The comp numbers (cold, no oil) were: Cyl 1 -129psi Cyl 2 - 133psi Cyl 3 - 138psi Cyl 4 - 137psi Cyl 5 - 157psi Cyl 6 - 142psi   Cylinder 5 and 6 having the most carbon on them.
    • MBS206
      R33 Fuel Pump & Brakes after alarm swap

      By MBS206 · Posted

      Who did you have do the installation? I actually know someone who is VERY familiar with the AVS gear. The main point of contact though would be your installer.   Where are you based in NZ?
    • GTSBoy
      R33 Fuel Pump & Brakes after alarm swap

      By GTSBoy · Posted

      Look, realistically, those are some fairly chunky connectors and wires so it is a reasonably fair bet that that loom was involved in the redirection of the fuel pump and/or ECU/ignition power for the immobiliser. It's also fair to be that the new immobiliser is essentially the same thing as the old one, and so it probably needs the same stuff done to make it do what it has to do. Given that you are talking about a car that no-one else here is familiar with (I mean your exact car) and an alarm that I've never heard of before and so probably not many others are familiar with, and that some wire monkey has been messing with it out of our sight, it seems reasonable that the wire monkey should be fixing this.
    • GTSBoy
      After market rear camber arm adjustment

      By GTSBoy · Posted

      Wheel alignment immediately. Not "when I get around to it". And further to what Duncan said - you cannot just put camber arms on and shorten them. You will introduce bump steer far in excess of what the car had with stock arms. You need adjustable tension arms and they need to be shortened also. The simplest approach is to shorten them the same % as the stock ones. This will not be correct or optimal, but it will be better than any other guess. The correct way to set the lengths of both arms is to use a properly built/set up bump steer gauge and trial and error the adjustments until you hit the camber you need and want and have minimum bump steer in the range of motion that the wheel is expected to travel. And what Duncan said about toe is also very true. And you cannot change the camber arm without also affecting toe. So when you have adjustable arms on the back of a Skyline, the car either needs to go to a talented wheel aligner (not your local tyre shop dropout), or you need to be able to do this stuff yourself at home. Guess which approach I have taken? I have built my own gear for camber, toe and bump steer measurement and I do all this on the flattest bit of concrete I have, with some shims under the tyres on one side to level the car.
    • Jarsky
      R33 Fuel Pump & Brakes after alarm swap

      By Jarsky · Posted

      Thought I would get some advice from others on this situation.    Relevant info: R33 GTS25t Link G4x ECU Walbro 255LPH w/ OEM FP Relay (No relay mod) Scenario: I accidentally messed up my old AVS S5 (rev.1) at the start of the year and the cars been immobilised. Also the siren BBU has completely failed; so I decided to upgrade it.  I got a newer AVS S5 (rev.2?) installed on Friday. The guy removed the old one and its immobilisers. Tried to start it; the car cranks but doesnt start.  The new one was installed and all the alarm functions seem to be working as they should; still wouldn't start Went to bed; got up on Friday morning and decided to have a look into the no start problem. Found the car completely dead.  Charged the battery; plugged it back in and found the brake lights were stuck on.  Unplugging the brake pedal switch the lights turn off. Plug it back in and theyre stuck on again. I tested the switch (continuity test and resistance); all looks good (0-1kohm).  On talking to AVS; found its because of the rubber stopper on the brake pedal; sure enough the middle of it is missing so have ordered a new one. One of those wear items; which was confusing what was going on However when I try unplugging the STOP Light fuses (under the dash and under the hood) the brake light still stays on. Should those fuses not cut the brake light circuit?  I then checked the ECU; FP Speed Error.  Testing the pump again; I can hear the relay clicking every time I switch it to ON. I unplugged the pump and put the multimeter across the plug. No continuity; im seeing 0.6V (ECU signal?) and when it switches the relay I think its like 20mA or 200mA). Not seeing 12.4V / 7-9A. As far as I know; the Fuel Pump was wired through one of the immobiliser relays on the old alarm.  He pulled some thick gauged harness out with the old alarm wiring; which looks to me like it was to bridge connections into the immobilisers? Before it got immobilised it was running just fine.  Im at a loss to why the FP is getting no voltage; I thought maybe the FP was faulty (even though I havent even done 50km on the new pump) but no voltage at the harness plug.  Questions: Could it be he didnt reconnect the fuel pump when testing it after the old alarm removal (before installing the new alarm)?  Is this a case of bridging to the brake lights instead of the fuel pump circuit? It's a bit beyond me as I dont do a lot with electrical; so have tried my best to diagnose what I think seems to make sense.  Seeking advice if theres for sure an issue with the alarm install to get him back here; or if I do infact, need an auto electrician to diagnose it. 
×
×
  • Create New...