Jump to content
SAU Community

Recommended Posts

Oh lol sorry Ben I forgot about that blind... I got side track with the motor. I don't know wot to do turbo wise... Is it possible to get around 300kw on a stock manifold or am I wasting my time looking?? I have power fc, z32 afm, 650cc injectors, fuel pump, reg, fmic, but can't decide on turbo [emoji36]

It is entirely possible.

All of the suggestions posted here will do exactly what you are asking..

650CC injectors means probably 98... so... 3076 is probably your best bet.

Hypergear will likely also have something that will do 300 in a stock location though.

(or you could just buy my 2nd hand gtx3076.....)

can people give me some advise please?? I have a stagea rb Neo and I was going to go high mount turbo and the rest but was wondering wot turbo people are using to get 300kw on a standard manifold with power fc, injectors etc?? Thanks

For some thing that is virtually bolt on with very little fabrications, we can build you some thing that will sit around the 280rwkws region. Alternatively we can also high flow your stock OP6 turbo that will make around the 270rwkws mark.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now


  • Similar Content

  • Latest Posts

    • Pads for R32 GTS-t, R32 GT-R non V-Spec (Sumitomo), R33 GTS-t and R34 GT-t are all interchangeable. R34 GT uses a 2x piston caliper, hence it didn't fit.
    • Checked with amayama and nope, the full S2 manual set is not available anymore. Unsurprising, but still disappointing as the ? on availability gave a glimmer of hope.
    • I've heard the Tomei USA head gaskets are decent if you want to o-ring the heads but otherwise not recommended.
    • The 296mm rotors are the R33 turbo brakes. The 310mm rotors are the R34 turbo brakes. The calipers are nearly the same, but not. They're the same caliper but the R34 caliper has longer legs so that it sits out far enough to go over the rotor. The pads are the same for both. When you say, "I bough tsome EBC"....did you just mean pads? Or rotors? 310mm rotors fit under 17" wheels. There may be some wheels without enough clearance though. I can't fit my fingers between the barrel of my wheel and the "corners" of my R34 calipers, but there is plenty of room behind the spokes. This is on Enkei RPF1. You can fit 324mm rotors inside a 17" wheel, but I'd be willing to bet that it would be close to impossible with the Nissan/Sumitomo caliper (using an adapter, of course), because the Sumitomo caliper is fatter than the Brembo caliper that is supposed to go on the 324mm rotors.
    • Hi. Can someone tell me what brakes(and mainly WHERE) can i buy brakes on R34 GTT? I bought some EBC which SHOULD go on my car(i have GT but it has GTT brakes) but it does not fit, Brakes are "too" small(296mm) Are 310mm be good or? I have 17 inch wheel so no "big boys" but for me driving i just need one that fits and i can get here in EU/Czech.
×
×
  • Create New...